Your Shopping Cart is empty

Manufacturer = Estes

    "Young Astronauts Club" Cadet Model Rocket Kit (OOP, 1987)

    Estes "Young Astronauts Club" Cadet Model Rocket Kit (OOP, 1987)

    Estes released the Cadet kit in 1987 to support the "Young Astronauts Club." This kit is no longer in production. It is in good condition and is still-sealed in the original packaging.

    Based on the Blazer kit, this kit features die-cut fiber fins and streamer recovery.

    Established in 1984 by the White House, the Young Astronauts Council uses space to promote interest in science, math, and technology among young people. The Council supports local Young Astronauts Chapters around the world as well as the "Young Astronauts Club" for individual memberships. The Council is a non-profit organizationand receives no government funding. It is funded by membership fees paid by its official chapters. Chapters and Club (individual) members receive official Young Astronaut membership cards and certificates containing a seal that was flown in space aboard the space shuttle.

    220 Swift Model Rocket Kit

    Estes 220 Swift Model Rocket Kit

    Is it okay to describe a rocket as "cute?" If so, then the Estes 220 Swift is cute. This tiny powerhouse rushes into the sky on a mini-motor then tumbles back to earth ready to fly again.

    24mm Engine Retainer Set

    Estes 24mm Engine Retainer Set

    The Estes Pro Series II 24mm Engine Retainer Set includes the parts to create two screw-on motor retainers for your model rockets. The retainers allow you to quickly load and unload engines from your rockets.

    The threaded part is permanently glued to the end of your rocket's motor tube while the other part is a screw-on cap to hold the motor in place.


    29mm Engine Retainer Set

    Estes 29mm Engine Retainer Set

    The Estes Pro Series II 29mm Engine Retainer Set includes the parts to create two screw-on motor retainers for your model rockets. The retainers allow you to quickly load and unload engines from your rockets. The threaded part is permanently glued to the end of your rocket's motor tube.

    The other part acts as a cap and screws on to hold the motor in place.

    3 Bandits Model Rocket Kits

    Estes 3 Bandits Model Rocket Kits

    The Estes 3 Bandits assortment includes three easy-to-assemble mini-engine rockets.

    • Length - 10.8 in. to 11.1 in. (27.4 to 28.3 cm)
    • Diameter - .74 in. (19 mm)
    • Estimated Weight - .6 to .71 oz (19.8 to 20.1 g)
    • Plastic fins, self-stick decals, 6 in. (15.2 cm) parachute recovery
    AGM-57X Heatseeker Model Rocket Kit

    Estes AGM-57X Heatseeker Model Rocket Kit

    This scale-like model rocket kit is easy-to-assemble with no painting required.

    Airborne Surveillance Missile Model Rocket Kit

    Estes Airborne Surveillance Missile Model Rocket Kit

    Estes introduced the Airborne Surveillance Missile kit in the early 1980s. Now they've brought back the military-style rocket. Flying on economical mini-engines, the ASM can reach alitudes of 300 feet or more.

    Airwalker Model Rocket Kit

    Estes Airwalker Model Rocket Kit

    This is a "reintro" of the popular Air Walker model rocket kit from Estes. A clear payload section adds to the fun of this rocket. Building remains the same as the original kit and is easy to build no matter what your experience level. Have this rocket on the launch pad in a quick afternoon and enjoy countless launches.

    Alien Green Crayon Model Rocket Kit

    Estes Alien Green Crayon Model Rocket Kit

    The Green Alien model rocket kit is almost ready to fly. This crayon-themed rocket stands almost 20" tall and features a twist-on fin section when also acts as a motor retainer.

    Alpha III Model Rocket Kit

    Estes Alpha III Model Rocket Kit

    The Alpha III's plastic fin assembly makes building the kit quick, easy, and almost foolproof.

    Alpha Model Rocket Kit

    Estes Alpha Model Rocket Kit

    The Estes Alpha has introduced many millions to model rocketry since its introduction more than 35 years ago. Easy-to-build, the Alpha looks great and flies great.

    The Alpha is a classic Skill Level 1 kit. It includes a one-piece body tube, laser-cut wood fins, and an aerodynamic nose cone.

    Building the Alpha takes about an afternoon. When powered with a C engine, the rocket can reach altitudes of 1,000 feet. Recovery is accomplished with a colorful 12-inch preassembled parachute.

    Alpha VI Model Rocket Kit

    Estes Alpha VI Model Rocket Kit

    The Alpha VI is a special limited-edition of the classic Alpha series of rockets. Commemorating the 60th anniversary of Estes, this kit features colorful self-stick decals.

    Altimeter

    Estes Altimeter

    The Estes altimeter reports the altitude that your rocket reaches on an easy-to-read LCD display. Attach the altimeter to your rocket's shock cord or store it in a payload section before flight.

    The Estes Altimeter has a four digit LCD read out which displays the maximum altitude in English or metric untis. It accurately measures model rocket launch altitudes from 0 - 9999 feet (0 - 3000 m) and stores up to ten consecutive flights.

    Includes a replaceable alkaline battery.

    Ascender Model Rocket Kit

    Estes Ascender Model Rocket Kit

    The Ascender is an easy-to-build entry in Estes's Pro Series II series of larger model rockets. Flying on 29mm E and F motors, the Ascender features plastic fins, self-stick decals, a screw-on motor retainer and an 18" nylon parachute. The Pro Series II E2X Booster (not included) may be used with the Ascender to create a two-stage rocket that can reach more than 3000' in altitude.

    Asteroid Hunter Model Rocket Kit

    Estes Asteroid Hunter Model Rocket Kit

    The Estes Asteroid Hunter has a unique sci-fi design that will blow you away. This kit is a challenge to construct but will reward you with its out-of-this-world exotic appearance.

    Astron Explorer Model Rocket Kit

    Estes Astron Explorer Model Rocket Kit

    Standing more than 42" tall when assembled, this Skill Level 4 kit includes waterslide decals and plastic nose cones.

    Astron II Launch Controller

    Estes Astron II Launch Controller

    The new Estes Astron II Launch Controller is fully assembled and requires one 9V battery (not included). It's brightly colored and will be easy to find in your launch box.

    Unlike the original Electron Beam Controller, the new Astron II controller is safe for use with low-current igniters like the Q2G2s from Quest.

    Astron II Launch Pad

    Estes Astron II Launch Pad

    Estes's Astron II launch pad is great for launching small and medium size rockets which use a 1/8" diameter launch rod.

    The Estes 3/16" launch rod does not work with the Astron II launch pad.

    Astron Sky Dart II Model Rocket Kit

    Estes Astron Sky Dart II Model Rocket Kit

    Powered by standard engines, expect to be impressed with the glider flight of the Astron Skydart II. Absolutely the coolest glider rocket Estes makes, one minute duration glides are fully possible. Be the first on your block to get this cool rocket.

    Astron Sprint XL Model Rocket Kit

    Estes Astron Sprint XL Model Rocket Kit

    For more than three decades, Mike Dorffler designed rockets and other products for Estes. To honor Dorffler’s legacy, Estes has produced a larger version of one of Mike’s classic rockets. The Skill Level 2 Astron XL flies on 24mm C, D, and E motors.

    Atomic Aqua Model Rocket Kit

    Estes Atomic Aqua Model Rocket Kit

    One of Estes's series of "ready-to-fly" crayon rockets, the Atomic Aqua flies to more than 500 feet on a C motor.

    Atomic Sky Launch Set

    Estes Atomic Sky Launch Set

    Easy assembly and no painting required leaves more time for fun. The Atomic Sky launch set includes the Aston II Launch Pad and the Astron II Launch Controller.

    The launch controller uses four AA alkaline batteries (not included).  Rocket engines and other launch supplies are not included. Recommended for ages 10 and up with adult supervision for those under 12.

    Baby Bertha Model Rocket Kit

    Estes Baby Bertha Model Rocket Kit

    The Baby Bertha is a pint-sized version of the classic Big Bertha. At just under 13 inches, the Baby Bertha is about half the size of it's larger cousin. The Baby Bertha kit features laser-cut fins, a plastic nose cone, self-stick decals, and a colorful 12-inch pre-assembled parachute.

    Bandito Model Rocket Kit

    Estes Bandito Model Rocket Kit

    The Estes Bandito is a sporty, easy-to-assemble model rocket kit which flies on mini-engines.

    Big Bertha Model Rocket Kit

    Estes Big Bertha Model Rocket Kit

    The Big Bertha is a classic Estes kit. Designed by Vern Estes himself, this is one of the largest Skill Level 1 rockets. it is a great beginenr's rocket. The Big Bertha is terrific for demonstractions as its large size and steady flights on smaller motors provide slow, realistic lift-offs.

    Big Daddy Model Rocket Kit

    Estes Big Daddy Model Rocket Kit

    The Big Daddy is a modern classic. This beefy rocket flies on 24mm C, D, and E motors.

    Black Brant III Model Rocket Kit

    Estes Black Brant III Model Rocket Kit

    Estes's Black Brant III is a flying scale model of the primary research vehicle produced by Canada Bristol Aerospace and is an excellent choice for your first scale project. Construction is fairly simple with high-quality parts including laser-cut wood fins, waterslide decals, and a 12 inch parachute for recovery. Great performance and really impressive flights!

    Black Hole Model Rocket Kit

    Estes Black Hole Model Rocket Kit

    One of Estes's series of crayon-inspired rockets, the Black Hole is almost ready to fly. Standing almost 20 inches tall, this rocket goes well over 500 feet.

    Black Star Voyager Model Rocket Kit

    Estes Black Star Voyager Model Rocket Kit

    Hands down, the coolest rocket to hit the Estes line this year, the Black Star Voyager can soar to 1100 feet when powered by an E12-4 engine. For the serious rocketeer, this is a must have!

    Sharpen your building skills because when you are finished building this rocket, you will be the envy of the flying fiield!

    Blast Deflector

    Estes Blast Deflector

    Includes one metal blast deflector plate and a standoff assembly.

    Blast Off Blue Model Rocket Kit

    Estes Blast Off Blue Model Rocket Kit

    Blast off with the Estes Blast Off Blue flying model rocket. This kit comes pretty much ready to fly and soars to more than 500 feet on a C motor.

    Blenders Model Rocket Kit

    Estes Blenders Model Rocket Kit

    The Estes Blenders rocket kit includes the parts to build two mini-engine powered saucers.

    Booster-55 - Add-On Booster for BT-55 Rockets

    Estes Booster-55 - Add-On Booster for BT-55 Rockets

    This Almost Ready to Fly (ARF) accessory adds a booster stage to compatible rockets allowing them to fly higher as two-stage rockets. Designed specifically for use with the Estes Red Rider (2484), L.G.M. 0095 (2485), Drifter (2491), Spirit (2492), Chiller (2495), and Nova (2497) model rockets, this booster uses one D12-0 model rocket booster engine (not included).

    Booster-60 - Add-On Booster for BT-60 Rockets

    Estes Booster-60 - Add-On Booster for BT-60 Rockets

    This Almost Ready to Fly (ARF) accessory adds a booster stage to compatible rockets allowing them to fly higher as two-stage rockets.  Designed specifically for use with the Estes Flying Colors (002486), Helios (002487), and Firestorm (002488) model rockets, this booster uses one D12-0 model rocket booster engine (not included).

    Bull Pup 12D Model Rocket Kit

    Estes Bull Pup 12D Model Rocket Kit

    The Estes Bull Pup 12D is a sport-scale version of the Air Force's AGM-12D Bull Pup missile. The Bull Pup makes a great first scale model.

    CC Express Model Rocket Kit

    Estes CC Express Model Rocket Kit

    The Estes CC Epress is multi-staging at its best. The CC Express has blistering performance and great looks. It features a one-piece body tube, molded plastic nose cone, and laser-cut wood fins for easy assembly. The self-stick decals will make this high altitude specialist a real stand out at any launch site. The CC Express is a must have for any rocket enthusiast looking for ultimate, high flying excitement!

    Centuri Model Rocket Kit

    Estes Centuri Model Rocket Kit

    A tribute to yesterday's rockets, the Estes Centuri features laser-cut wood fins and a 12" parachute.

    Chiller Model Rocket Kit

    Estes Chiller Model Rocket Kit

    The Estes Chiller is an "Almost Ready to Fly" model rocket. Its shiny chrome nose cone makes it easy to track on a sunny day. Assembly is so simple, slip the fin into the fin slots then attach the recovery system. Add the BT-55 Booster Accessory (sold separately) for two-stage flights.

    Chrome Domes Gold Model Rocket Kit

    Estes Chrome Domes Gold Model Rocket Kit

    With gold chrome fins and nose cone, the Estes Chrome Domes Gold model rocket kit is sure to put a sparkle in your eye. A prismatic body tube completes the jewel-like appearance of this easy-to-build rocket kit.

    Chuter 2 Model Rocket Kit

    Estes Chuter 2 Model Rocket Kit

    The Estes Chuter 2 features dual parachutes which bring this classic rocket back to Earth in style after blasting off to heights of up to 900 feet. The unique fin design and colorful body of the Chuter-Two make it a great rocket for anyone.

    Estes has gone back to the archives and pulled up old drawings and spec sheets to bring back this vintage design. The kit has been reproduced and updated while retaining the classic lines of the original. The Chuter-Two kit contains high-quality body tubes, a balsa nose cone, and laser-cut balsa fins.

    Citation Series Patriot Model Rocket Kit

    Estes Citation Series Patriot Model Rocket Kit

    Coming soon from Estes ... a reissue of the Estes Citation Series Patriot model rocket kit. The price and details of the kit are to be determined, but you can use the form on this page to sign up to receive an email when we get the kits.

    Clear Payload Section Assortment

    Estes Clear Payload Section Assortment

    The Estes Clear Payload Section Assortment includes clear payload sections in three different sizes - BT-20, BT-50, and BT-60. Three clear tubes of each size are included (for a total of nine payload section tubes).


    The three BT20 tubes are 2.75" long. The three BT50 tubes are 4" long. The three BT60 tubes are 5" long.

    Color the Sky Crayon Rockets Bulk Pack (12)

    Estes Color the Sky Crayon Rockets Bulk Pack (12)

    The Estes Color The Sky collection includes twelve crayon-themed rocket kits - each a different color.

    Each kit is easy-to-assemble with plastic fins and nose cone, self-stick decals, and a plastic parachute.

    This is a bulk package of twelve (12) kits.

    Conquest Model Rocket Kit

    Estes Conquest Model Rocket Kit

    The time and experience you put into building the Estes Conquest will be rewarded when you see this futuristic rocket blast form the launch pad on a D or E motor.

    Cosmic Cobra Model Rocket Kit

    Estes Cosmic Cobra Model Rocket Kit

    You'll be amazed when the rocket returns to earth with a parachute while the nose cone helicopters down.

    The Cosmic Cobra streaks to altitudes over 500 feet high. Two recovery devices are used to tame this reptile. The main rocket, with upswept fins, returns to earth on a colorful 12 inch parachute while the sleek nose cone helicopters down on bright colored, retractable rotor blades. Assembly of the Cobra takes about one hour or less, making it a great choice for any beginner! You'll draw a crowd at the flying field when you blast this unique rocket into space!

    Cosmic Explorer Model Rocket Kit

    Estes Cosmic Explorer Model Rocket Kit

    This sleek design from Estes features quality body tubes, a large balsa nose cone, laser-cut balsa fins, and easy-to-apply waterslide decals.

    Cosmic Interceptor Model Rocket Kit

    Estes Cosmic Interceptor Model Rocket Kit

    The Cosmic Interceptor is an awesome D and E powered rocket. Standing 40.5 inches tall, this is one impressive rocket on the launch pad and in the air! Sharpen your building skills before tackling this one.

    Crossbow SST Model Rocket Kit

    Estes Crossbow SST Model Rocket Kit

    A smaller cousin of the classic Satellite Interceptor kit, the Crossbow SST can reach a height of 1600 feet on a C6-5.

    Crossfire ISX Model Rocket Kit

    Estes Crossfire ISX Model Rocket Kit

    Prioviously only available in a launch set, the Estes Crossfire ISX is, perhaps, the coolest looking beginner's kit in Estes's catalog. With laser-cut wood fins and bright, self-stick decals, the Crossfire ISX flies on standard-size motors and is recovered by parachute.

    Curvilinear Model Rocket Kit

    Estes Curvilinear Model Rocket Kit

    The new Estes Curvilinear is an easy-to-build rocket which is great for flying from a small field.

    D and E Engine Mount Kit

    Estes D and E Engine Mount Kit

    The Estes D & E Engine Mount Kit includes parts to construct two D and/or E motor mounts with some parts left over for later use.  It also includes an adapter that lets you to fly D engines in rockets using an E-size engine mount.

    Centering rings are provided for creating motor mounts for BT-55, BT-60, or BT-80 body tubes.

    Includes detailed assembly instructions with illustrations.

    D-Region Tomahawk Model Rocket Kit

    Estes D-Region Tomahawk Model Rocket Kit

    The Estes D-Region Tomahawk is a 1/5 scale flying model of NASA's sounding rocket. Launched only one time in 1968, this rocket was designed to take measurements of the D-layer of the ionosphere - thus its name. Estes's version of this fantastic scale rocket captures all the detail of the original in an easy to assemble model that flies as good as it looks.

    In terms of performance, this gigantic rocket can blast nearly 800 feet high when powered with an E engine. An adapter is included to launch on Estes D engines. Finally, to protect this beautiful scale model when it lands, a 24-inch pre-assembled nylon parachute is included.

    Der Red Max Model Rocket Kit

    Estes Der Red Max Model Rocket Kit

    Der Red Max is a re-issue of the classic kit which first appeared in Estes's 1971 catalog. The rocket is a little more than 16 inches tall. It includes waterslide decals, laser-cut balsa fins, and a pre-assembled 18" parachute.

    Eggscaliber Model Rocket Kit

    Estes Eggscaliber Model Rocket Kit

    The Estes Eggscaliber has a special clear payload section which holds an egg. With the included engine adapter, it can fly on B/C or D/E motors.

    A motor adapter is included so you can launch your rocket on standard Estes engines or remove the adapter to fly the rocket on more powerful D or E engines. The Eggscaliber with its large payload section is also great for science experiments. The Eggscaliber is a Skill Level 2 kit which requires more skills in building and painting.

    Use of an E motor requires a larger launch pad such as the Estes Porta-Pad E and a more-powerful launch controller such as the Estes E Launch Controller. The launch pad and controller ore sold separately.

    Eggs (and bacon) not included.

    Recommended Motors (with egg): B6-2, C6-3, C11-3, D12-3, E9-4
    Recommended Motors (no egg): B4-2, B6-2, C6-5, D12-5, E9-6

    Electron Beam Launch Controller

    Estes Electron Beam Launch Controller

    This launch controller comes complete with a safety key and 15 feet of cable. It requires four AA alkaline batteries (not included).

    Eliminator Model Rocket Kit

    Estes Eliminator Model Rocket Kit

    The Estes Eliminator is a super high performance model rocket design intended for high altitude, cloud punching flying on our powerful E engines! The rocket is almost 31 inches tall and features purple wrapped body tubes and a one piece molded fin set that can handle all the power an E can deliver. A bright yellow nose cone sits atop the rocket while the tribal looking self-stick decals add to its visibility...which you're going to need as the E engine pushes this beast up to 1,400 feet.

    Assembly of this high performance hot rod takes about an hour. When completed you'll be ready for the flight pad for some serious high altitude, blistering fast model rocket flying. Recovery is accomplished using a colorful 12 inch, preassembled parachute for soft landings. Includes an adapter that allows you to quickly convert from E to D engine power.

    Eliminator XL Launch Set

    Estes Eliminator XL Launch Set

    The Estes Eliminator XL rocket stands 44 inches tall. Assembly is easy, just twist the sections together. The Eliminator XL is ready to launch in just a few minutes.

    This set includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. A 3/16-inch Maxi Launch Rod is also included.

    Engines, batteries, and other supplies are not included.

    Engine Adapters - Standard to D

    Estes Engine Adapters - Standard to D

    These reusable, simple-to-use plastic adapters allow you to load standard 18mm diameter motors in rockets designed for the larger, 24mm motors.

    Just insert a standard B6 or C6 engine into the adapter, then insert the adapter into a rockets weighing up to four ounces that would normally fly on C11 or D12 engines.

    Three adapters are included.

    NOTE: These motor adapters have been tested in products that use Estes metal engine hooks. They may not work well with other types of engine hooks.

    EX-200 Model Rocket Kit

    Estes EX-200 Model Rocket Kit

    The EX-200 comes fully assembled. It flies an amazing 425 feet on Estes Mini Engines.

    Executioner Model Rocket Kit

    Estes Executioner Model Rocket Kit

    The Execution is over 36" tall and flies on powerful D and E motors. The kit includes a slotted body tube and laser-cut wood fins.

    Fin Alignment Guide

    Estes Fin Alignment Guide

    The Estes Fin Alignment Guide makes it easier to accurately attach fins to your model rocket. The guide works with 3/32" (2 mm) or 1/8" (3 mm) thick balsa. It aligns the fins and holds them in place as the glue dries.

    Body tubes and balsa not included.

    Firehawk Model Rocket Kit

    Estes Firehawk Model Rocket Kit

    The Estes Firehawk is a four-finned, easy-to-assemble rocket which requires no painting. It flies on mini-engines.

    Firestorm Model Rocket Kit

    Estes Firestorm Model Rocket Kit

    The Estes Firestorm is an "Almost Ready-to-Fly" (ARTF) model rocket featuring uniquely colored plastic fins and nose cone. Just slip the fins into the fin can and the rocket is ready to prep for flight.

    Add the BT-60 Booster accessory (sold separately) to fly the Firestorm as a two-stage rocket.

    Firestreak SST Model Rocket Kit

    Estes Firestreak SST Model Rocket Kit

    The Firestreak SST is a "Simple Snap-Together" model rocket kit. About 10" long, this plastic kit can be assembled and ready to fly in 15 minutes.

    Fletcher Model Rocket Kit

    Estes Fletcher Model Rocket Kit

    The Estes Fletcher is a sleek, arrow-like rocket designed to soar to over 325 feet on mini engines. The cool black and blue styling gives this rocket a unique look.

    Flip Flyer Model Rocket Kit

    Estes Flip Flyer Model Rocket Kit

    The Estes Flip Flyer is an easy-to-assemble kit featuring parachute and helicopter recovery. The nose of the rocket returns to earth under a parachute while the body deploys rotors and returns like a helicopter.

    Flutter-By Model Rocket Kit

    Estes Flutter-By Model Rocket Kit

    Estes has re-created the Centuri classic of the early 1970s. The Flutter-By does not have a parachute or streamer. Instead, at apogee, the rocket splits into two parts.Each part tumbles to earth.

    Flying Colors Model Rocket Kit

    Estes Flying Colors Model Rocket Kit

    Este's Flying Colors model rocket sports a fun color scheme. It's almost fully assembled when you get it.  Just slip the fins into the fin can, and it's ready to prep for launch. Add the BT-60 Booster accessory (sold separately) to convert the Flying Colors to a multi-stage rocket.

    Fractured Model Rocket Kit

    Estes Fractured Model Rocket Kit

    Easily assembled and ready for flight quickly, the Fractured doesn't require any painting. It flies up to 550 feet on a C6-3 or C6-5 engine. Add the Booster-60 accessory (sold separately) for two-stage flights.

    Gnome Model Rocket Kit

    Estes Gnome Model Rocket Kit

    The Gnome is just a little over 10 inches tall with a shiny chrome body tube and blue nose cone and fins. This great-looking, mini-engine powered cloud chaser can reach altitudes of well over 800 feet. Recovery is fast and reliable with its fluorescent streamer.

    The Gnome is one of the Estes E2X (Easy to Assemble) series of kits and features a single piece, chrome wrapped body tube, a bright blue precolored fin unit, nose cone, and upper launch lug ring. The rocket takes about 30 minutes to build and is finished off with a colorful, easy-to-apply self-stick decal. With its simple assembly and precolored parts, it's an excellent choice for the first time rocketeer.

    Goblin Model Rocket Kit

    Estes Goblin Model Rocket Kit

    Estes has brought back another classic model rocket kit. The Estes Goblin first appeared in the early 1970s and has remained a favorite of rocketry modelers through the decades.

    Gold Strike / Silver Streak Model Rocket Kit

    Estes Gold Strike / Silver Streak Model Rocket Kit

    Get two rockets for the price of one. Purchase the Gold Strike and get the Silver Streak, a mini-engine powered rocket, free.

    The Gold Strike and it's sidekick, the Silver Streak, are both easy to assemble rockets.

    Launched on standard Estes engines, the Gold Strike can reach heights of 725 feet while the Silver Streak, powered by mini engines, reaches 200 feet. Both rockets brighten up the sky with their shimmery body tubes and brightly-colored parachutes.

    Gold Strike:

    • Skill Level: E2X
    • Length: 18.75 in (47.6 cm)
    • Diameter: 1.33 in (34 mm)
    • Weight: 2.17 oz (61.5 g)
    • Nose Cone: Plastic
    • Fins: Plastic
    • Decals: Self-stick
    • Recovery: Parachute
    • Recommended Motors: B4-4, B6-4, C6-5

    Silver Streak:

    • Skill Level: E2X
    • Length: 10 in (25.4 cm)
    • Diameter: .74 in (19 mm)
    • Weight: .65 oz (18.4 g)
    • Nose Cone: Plastic
    • Fins: Plastic
    • Decals: Self-stick
    • Recovery: Parachute
    • Recommended Motors: 1/4A3-3T, 1/2A3-2T
    Guardian Model Rocket Kit (Non-Retail Packaging)

    Estes Guardian Model Rocket Kit (Non-Retail Packaging)

    With a multi-fin design resembling a surface-to-air missile, the Guardian is a Skill Level 2 rocket with parachute recovery.

    This is a new kit, still sealed in clear packaging rather than fancy retail packaging.

    Helicat Launch Set

    Estes Helicat Launch Set

    In just a few minutes you will have this rocket ready for the launch pad. The Estes HeliCAT features a unique helicopter nose cone recovery that is a blast to watch land.

    You will need glue and plastic cement, but assembly of the HeliCAT is easy and no painting is necessary. Powered by standard Estes engines, this quickly built rocket reaches heights of over 500 feet.

    This is a launch set which includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. Batteries, rocket motors, and other launch supplies are not included.

    Helios Model Rocket Kit

    Estes Helios Model Rocket Kit

    The Estes Helios is an almost-ready-to-fly rocket featuring a bright silver body tube and yellow fins and nose cone. Slide the fins into the fin can and the rocket is ready to prep for flight.

    The BT-60 Booster accessory (sold separately) converts the Helios into a two-stage rocket.

    Hex 3 Model Rocket Kit

    Estes Hex 3 Model Rocket Kit

    Estes's Hex 3 is a unique kit requiring "unique paper folding" to build. The Hex 3 flies on 18-mm booster motors.

    Hi-Flier Model Rocket Kit

    Estes Hi-Flier Model Rocket Kit

    The Estes Hi-Flier is one of the most extreme, super performance model rockets you can own. The Hi-Flier can easily be built in one afternoon. The Estes Hi-Flier isis capable to flights over 1,600 feet and recovers with a fluorescent orange streamer.

    Honest John Model Rocket Kit

    Estes Honest John Model Rocket Kit

    Estes's 1/14th scale Honest John flies on an E motor to an altitude of about 1400 feet then returns to earth via parachute.

    Hornet Model Rocket Kit

    Estes Hornet Model Rocket Kit

    The Estes Hornet is a sporty, easy-to-assemble rocket featuring an eye-catching waterslide decal.

    Humdinger Model Rocket Kit

    Estes Humdinger Model Rocket Kit

    The Estes Humdinger is an almost-ready-to-fly mini-engine powered rocket. The Humndinger is almost two feet tall, but just a little over 1/2 inch in diameter. So, it's a sleek-looking rocket.

    Hyper Bat Model Rocket Kit

    Estes Hyper Bat Model Rocket Kit

    The Estes Hyper Bat is a two-stage model rocket kit with a plastic nose cone and laser-cut fins.

    Indicator Model Rocket Kit

    Estes Indicator Model Rocket Kit

    The Estes Interceptor is a simple build which flies on inexpensive mini-engines! Standing over 21 inches tall, the Indicator reaches 200 feet on an A10-3T engine.

    Jetliner Model Rocket Kit

    Estes Jetliner Model Rocket Kit

    The Estes Jetliner will remind long-time rocketeers of the Goonybirds series of rockets from the 1970s.

    Laser Lance Model Rocket Kit

    Estes Laser Lance Model Rocket Kit

    The Laser Lance stands over 20 inches tall and can reach heights of 925 feet. A military-style model, it's sure to be a crowd pleaser!

    Launch Rod - 1/8" Two-Piece - Model Rocket Accessory

    Estes Launch Rod - 1/8" Two-Piece - Model Rocket Accessory

    This two-piece launch rod is the standard diameter and length for most model rockets.

    You can combine this launch rod with a blast deflector, Odd'l Rocket's Adeptor, and your photo tripod to make a "high-tech" launch pad.

    Little Joe I Model Rocket Kit

    Estes Little Joe I Model Rocket Kit

    The Little Joe booster was the first rocket designed solely for manned spacecraft qualifications and to measure critical parameters at higher altitudes. The Estes 1/34th scale Little Joe stands almost 18 inches tall and launches to 400 feet on a C6-5 engine. Other features include a plastic Mercury capsule and engine nozzles, precision laser-cut balsa, printed card-stock fins, high-quality waterslide decals, and a colorful 15-inch parachute for "safe reentry." The Little Joe 1 will soon be in stock for an exciting holiday gift that every rocketeer will want to build and proudly display.

    Little Joe II Model Rocket Kit

    Estes Little Joe II Model Rocket Kit

    Estes's scale model of the Liittle Joe II features a plastic nose cone, vacuum-formed wraps, and injection-molded plastic fins and nozzles. This is a large scale model which flies on composite E motors.

    Longneck Express Model Rocket Kit

    Estes Longneck Express Model Rocket Kit

    Fast to the flying field, the Longneck Express is a fully assembled, great looking, really high-flying model rocket. Recovery is quick with 12-inch parachute so you can launch again and again.

    Lynx Model Rocket Kit

    Estes Lynx Model Rocket Kit

    Powered by the more-economical Estes mini-engines, the Lynx is a challenging kit to build that will reward you with its futuristic style and great flights.

    Magician Model Rocket Kit

    Estes Magician Model Rocket Kit

    Conjure up some special space magic with the Magician! No tricks up anyone's sleeve here, just a super high performance payload model rocket. The talented Estes rocket shop designers have spun their magic to create an enormous, supersized payload rocket. The Magician can handle all the power you put in the motor tube to send it on a magical mystery tourof the atmospheric kind.

    This sorcerer stands an impressive 33.5 inches tall and has a clear payload section. You can launch just about anything into space. Well, not quite anything, but its sure to hold a small race car, an action figure, or whatever your imagination can dream up. If it fits into the payload section, launch it.

    A Skill Level 3 rocket, this kit comes with a high quality balsa nose cone, laser cut balsa fins and waterslide decals. Designed to be flown on D or E engines, this rocket will scream off the launch pad to heights over 1,600 feet. Getting this illusionist back to earth is magically accomplished on a colorful pre-assembled 18 inch parachute.

    Mean Machine Model Rocket Kit

    Estes Mean Machine Model Rocket Kit

    The Estes Mean Machine is a staggering 6 1/2 feet tall. It provides slow majestic flights.

    The Mean Machine comes with an adapter that allows it to be launched with either with D or E engines. Estes has updated this classic with a connector that allows the rocket to be broken down into two sections for easier transportation and storage.

    Mercury Redstone Model Rocket Kit

    Estes Mercury Redstone Model Rocket Kit

    Estes's scale model of the Liberty Bell 7 Mercury spacecraft and its Redstone booster features plastic parts, wooden fins, and waterslide decals.

    Mini "A" Heli Model Rocket Kit

    Estes Mini "A" Heli Model Rocket Kit

    Test your building skills with this contest-quality kit from Estes. The Mini "A" Heli deploys blades at apogee for helicopter recovery.

    Mini Comanche 3 Model Rocket Kit

    Estes Mini Comanche 3 Model Rocket Kit

    The Mini Comanche 3 is a smaller version of the popular three-stage Comanche 3 rocket. This version flies on mini-engines and can be flown as a single-stage, a two-stage, or a three-stage rocket.

    Mini Fat Boy Model Rocket Kit

    Estes Mini Fat Boy Model Rocket Kit

    Estes has produced a smaller version of its classic Fat Boy model rocket kit. The Mini Fat Boy flies on 13mm motors and features parachute recovery.

    Mini Honest John Model Rocket Kit

    Estes Mini Honest John Model Rocket Kit

    The Estes Mini Honest John is a mini-engine-powered sport scale model of the U.S. battle field artillery missile. The kit features a detailed molded nose cone and laser-cut balsa fins. Simple to build, the resulting model features plenty of detail that you will be proud to display.

    Mini Max Model Rocket Kit

    Estes Mini Max Model Rocket Kit

    Estes has created a smaller version of their classic Der Red Max kit. Just like the Der Red Max, the Mini Max is uniquely designed. It has the same ballistic-shaped nose cone and stubby fins as its bigger counterpart. Standing almost 10 inches tall, this miniature version definitely has a personality all its own!

    Powered by Estes mini engines,the Mini-Maxcan reach amazing heights of 400 feet. After its aerial assault, recovery is accomplished with a high-vizability streamer.

    The new Mini Max has all the great looks of the classic version, right down to the really cool skull and crossbones decals.The Mini features a balsa nose cone, laser cut balsa fins and waterslide decals.

    Mini Mosquito Model Rocket Kit

    Estes Mini Mosquito Model Rocket Kit

    This mini-engine powered rocket stands just 3.8" tall. The Mosquito features simple and quick construction with out-of-site performance.

    Tumble recovery brings this awesome little rocket back to earth. When powered by the A10-3T mini-engine, heights of 800 feet can be reached.

    MIRV Model Rocket Kit

    Estes MIRV Model Rocket Kit

    Enter the world of Multiple Re-Entry Vehicles with the Estes MIRV. The angular design of the model allows three independently powered rockets to separate from the booster which then climb to out-of-sight flights.

    This model includes light-weight foam and specially-molded plastic parts along with laser-cut wood fins. Recovery of the three upper stages is by “High Drag Recovery” which allows them to float gently back to Earth.

    PLEASE NOTE: This rocket requires four engines to launch - one B6-0 (or C6-0) and three A10-3Ts.

    Mix-n-Match 50 Model Rocket Kit

    Estes Mix-n-Match 50 Model Rocket Kit

    The Mix-n-Match 50 set includes parts to build three colorful rockets. All parts are pre-colored, so no painting is required. Two sheets of self-stick decals are included.

    The Mix-n-Match 50 includes BT-50 (0.976 inch diameter) parts:

    • Three nose cones and nose cone inserts
    • Six pre-colored BT-50 (.98 in diameter) body tubes
    • Three body tube connecters
    • Three fin can units
    • Twelve fins in three different styles
    • Three launch lugs and clear reinforcements
    • Three shock cords
    • Three pre-assembled parachutes
    • Two self-stick decal sheets
    Model Rocket Display Stand (For 13mm Mini-Engine Rockets)

    Estes Model Rocket Display Stand (For 13mm Mini-Engine Rockets)

    This package contains parts to assemble three (3) plastic stands for displaying your rockets in style. Fits rockets with 13mm motor mounts.

    Model Rocket Display Stand (For 18mm Standard Engine Rockets)

    Estes Model Rocket Display Stand (For 18mm Standard Engine Rockets)

    This package contains three (3) plastic stands for displaying your rockets in style. Fits rockets with standard 18mm motor mounts.

    Model Rocket Display Stand (For 24mm D&E Engine Rockets)

    Estes Model Rocket Display Stand (For 24mm D&E Engine Rockets)

    This package contains three (3) stands for displaying your rockets in style. Fits rockets with standard 24mm motor mounts.

    Model Rocket Tube Marking Guides

    Estes Model Rocket Tube Marking Guides

    This set includes includes the plastic Tube Marking Guide and two plastic Fin Marking Tools. Use the marking guide to draw reference lines down and/or around popular Estes-size rocket body tubes. The ruler is scaled for either metric or Inches measurements. The Fin Marking Tools are special disks which help you mark three- and four-fin spacing with precision.

    Mongoose Model Rocket Kit

    Estes Mongoose Model Rocket Kit

    Looking for your first two-stage rocket? Consider the Estes Mongoose. Plastic one-piece fin units make assembly quick and easy.

    NC-20 Plastic Nose Cones (4 pcs) - Model Rocket Part

    Estes NC-20 Plastic Nose Cones (4 pcs) - Model Rocket Part

    This package contains four plastic nose cones for use with the BT-20 body tubes. All have eyelets for shock cord and shroud line attachments.

    Note: Estes sometimes changes the selection of nose cones in their nose cone assortments.  Please be aware that the nose cones you receive may not be exactly the ones shown in the photo.

    NC-5 Plastic Nose Cones (5 pcs) - Model Rocket Part

    Estes NC-5 Plastic Nose Cones (5 pcs) - Model Rocket Part

    This package contains five plastic nose cones that fit standard BT-5 body tubes. All have eyelets for shock cord and shroud line attachments.

    Note: Estes sometimes changes the selection of nose cones in their nose cone assortments.  Please be aware that the nose cones you receive may not be exactly the ones shown in the photo.

    NC-50 Plastic Nose Cones (5 pcs) - Model Rocket Part

    Estes NC-50 Plastic Nose Cones (5 pcs) - Model Rocket Part

    This package contains five plastic nose cones that fit standard BT-50 body tubes. All have eyelets for shock cord and shroud line attachments.

    Note: Estes sometimes changes the selection of nose cones in their nose cone assortments. Please be aware that the nose cones you receive may not be exactly the ones shown in the photo.

    NC-55 Plastic Nose Cones (4 pcs) - Model Rocket Part

    Estes NC-55 Plastic Nose Cones (4 pcs) - Model Rocket Part

    Set of four plastic nose cones that fit BT-55 body tubes. All have eyelets for shock cord and shroud line attachments.

    These nosecones fit a standard BT-55 size body tube with an inside diameter of 1.283 inches and an outside diameter of 1.325 inches.

    Note: Estes sometimes changes the selection of nose cones in their nose cone assortments. Please be aware that the nose cones you receive may not be exactly the ones shown in the photo.

    NC-60A Plastic Nose Cones (3 pcs) - Model Rocket Part

    Estes NC-60A Plastic Nose Cones (3 pcs) - Model Rocket Part

    This package contains three plastic nose cones that will fit a standard BT-60 body tube. All have eyelets for shock cord and shroud line attachments.

    Note: Estes sometimes changes the number and type of nose cones in their nose cone assortments.  Please be aware that the nose cones you receive may not be exactly the ones shown in the photo.

    NC-80B Plastic Nose Cone - Model Rocket Part

    Estes NC-80B Plastic Nose Cone - Model Rocket Part

    Plastic nose cone with eyelet for shock cord and shroud line attachments. Fits a standard BT-80 body tube.

    Nemesis Model Rocket Kit

    Estes Nemesis Model Rocket Kit

    Estes introduced the Nemesis in their 2001 catalog. It features a futuristic spaceship design with a cockpit molded into the nosecone.

    Produced from about 2001 to 2004, this kit is still in the original packaging.

    Nike Smoke Model Rocket Kit

    Estes Nike Smoke Model Rocket Kit

    The Estes Nike Smoke is a 1/10th scale flying model of the Nasa sounding rocket developed in the 1960s to explore the behavior of horizontal winds in the upper atmosphere.

    Nike-X Model Rocket Kit

    Estes Nike-X Model Rocket Kit

    The Estes Nike-X single-stage rocket is a scale-like model of the US Army's fourth-generation, two-stage surface-to-air interceptor missile. This kit features a Nike-style design with Army details including high-quality, realistic roll-pattern waterslide decals.

    No.2 Skywriter Model Rocket Kit

    Estes No.2 Skywriter Model Rocket Kit

    This fun No. 2 Skywriter rocket looks like a wooden pencil. The Skywriter includes colored body tubes, fins, and nose cone, so assembly is quick and easy.

    Nova Model Rocket Kit

    Estes Nova Model Rocket Kit

    The Estes Nova is a sleek, almost-ready-to-fly model rocket. Flying on a C motor, it can reach 700 feet in altitude. Add the BT-55 Booster Accessory (sold separately) and a D12-0 booster engine and watch this rocket soar way past 1,400 feet.

    Odyssey Model Rocket Kit

    Estes Odyssey Model Rocket Kit

    The Estes Odyssey is a futuristic rocket powered by 24mm motors. Packed with Sci-Fi details, the Odyssey is a challenging, Skill Level 5 kit.

    Parachute - 15" Plastic

    Estes Parachute - 15" Plastic

    This 15-inch (38 cm) plastic parachute is pre-assembled and ready-to-use. It is the perfect size when an 18-inch parachute is too big and a 12-inch parachute is too small.

    Phoenix Bird Model Rocket Kit

    Estes Phoenix Bird Model Rocket Kit

    Based on the classic Centuri Phoenix Bird kit from the late 1970s, the new Estes Phoenix Bird features through-the-wall fins and self-stick foil decals.

    Photon Disruptor Model Rocket Kit

    Estes Photon Disruptor Model Rocket Kit

    The Estes Photon Disruptor kits is a "Classic Series" re-issue of the "21st century Star Fleet missile" which was originally released in 1991.

    Photon Probe Model Rocket Kit

    Estes Photon Probe Model Rocket Kit

    The Estes Photon Probe is a "Classic Series" re-issue of a futuristic kit which was originally released in 1991.

    Plasma Probe Model Rocket Kit

    Estes Plasma Probe Model Rocket Kit

    The Estes Plasma Probe captures the futuristic design of Centuri kits from the 1970s.

    Plastic Nose Cones - Sci-Fi Assortment - Model Rocket Parts

    Estes Plastic Nose Cones - Sci-Fi Assortment - Model Rocket Parts

    This assortment of five plastic nose cones includes ones with cockpits and other exotic features. Two of the nose cones fit BT-50 size tubes and the other three fit BT-55 diameter body tubes. You can use these unique nose cones to recreate classic Estes rockets from the past or to top off your own futuristic designs,

    Estes may change the actual nose cones included in the set at any time, but, usually, the following are included:

    • PNC-50 - Similar to the one used in the Estes Orion and Manta Bomber kits
    • PNC-50E - Similar to the one used in the Estes Screaming Eagle kit
    • PNC-55EJ - Similar to the one used in the Estes Interceptor kit
    • PNC-55CB - Similar to the one used in the Estes Odyssey and Rigel 3 kits
    • PNC-55 - Similar to the one used in the Estes Xarconian Destroyer and Voyager II kits
    Pro Series II 24-inch Nylon Parachute

    Estes Pro Series II 24-inch Nylon Parachute

    Estes's 24-inch (61 cm) nylon parachute is made of high quality nylon.

    Pro Series II 30-inch Nylon Parachute

    Estes Pro Series II 30-inch Nylon Parachute

    Estes's 30-inch (75 cm) nylon parachute is made of high quality nylon.

    Pro Series II E2X Prowler Launch Set

    Estes Pro Series II E2X Prowler Launch Set

    Get started with model rocketry in a big way!  The Prowler launch set includes the large, easy-to-assemble Prowler rocket kit, an E Launch Controller, and the Porta-Pad E launch pad.

    The Prowler rocket is 34" tall and 2" in diameter.  The hot pink rocket features plastic fins, self-stick decals, a screw-on motor retainer, and an 18" nylon parachute.  Use the launch pad and controller with any of the Pro Series II rockets as well as smaller model rockets.

    Protostar Model Rocket Kit

    Estes Protostar Model Rocket Kit

    The Estes Protostar is about two feet tall and flies on 24mm C11, D12, and E12 motors. Add its furturistic design to your space fleet.

    PSII Launch Controller

    Estes PSII Launch Controller

    The new Estes Pro Series II Launch Controller is powered by six C alkaline batteries (not included). It includes 30 feet (9.1 m) of heavy-duty cable making it the ultimate launch controller for the Pro Series II line of rockets and other mid-power rockets.

    The Pro Series II Launch Controller can be used with all types of igniters and motors from A through G. It's longer cable and higher-current also make it suitable for launching cluster-powered rockets with mutliple motors.

    Puma RTF Model Rocket Kit

    Estes Puma RTF Model Rocket Kit

    The mini-engine Estes Puma can reach altitudes of well over 800 feet . Recovery is reliable with its fluorescent streamer for easy tracking!

    The Estes Puma is a brightly colored, ready to fly, mini engine powered speedster. The slender, long lines of this rocket provide the beginning or seasoned rocketeer a high intensity model rocket flying experience! The Puma is just a little over 10 inches tall and is factory assembled and decorated. This mini engine powered cloud chaser can reach altitudes of well over 800 feet. Recovery is safe and reliable with its fluorescent colored streamer for easy tracking after a ballistic flight! The Puma is high performance model rocket flying fun of the easiest kind. It's a great rocket to take to the flying field when you are short on time, but want to fly! For cloud scratching performance, get the Puma ready to fly rocket.

    QCC Explorer Model Rocket Kit

    Estes QCC Explorer Model Rocket Kit

    Don't let the looks fool you with this Skill Level 4 kit. It may look like it's simple to build, but what's under the paint will surprise you! Each simulated air intake/fin assembly is constructed from 12 interlocking laser cut balsa pieces.

    Quinstar Model Rocket Kit

    Estes Quinstar Model Rocket Kit

    The Estes Qunstar flying model rocket is assembled from precision-cut wood pieces. The helicopter-recovery saucer spins on the way up as well as during recovery.

    Red Nova Model Rocket Kit

    Estes Red Nova Model Rocket Kit

    TThe Red Nova is D-engine powered and a great four-fin rocket. The Red Nova stands 21.6 inches tall and can reach an altitude of 800 feet. This well-designed kit comes with the standard high-quality parts that Estes is known for - precision laser-cut wood fins, a high-quality body tube, a plastic nose cone, a colorful pre-assembled parachute and impressive waterslide decals.

    Red Rider Model Rocket Kit

    Estes Red Rider Model Rocket Kit

    Red Rider is another of Este's new almost-ready-to-fly rockets. Assembly consists of little more than sliding the fins into the fin can. The Red Rider is a single-stage rocket, but you can add the BT-55 Booster accessory (sold separately) to convert it to a two-stage rocket.

    Reflector Model Rocket Kit

    Estes Reflector Model Rocket Kit

    The easy-to-assemble Estes Reflector has a large payload section, laser-cut fins, and waterslide decals.

    Rocket Red Crayon Model Rocket Kit

    Estes Rocket Red Crayon Model Rocket Kit

    Rocket Red is a RTF crayon-themed rocket. It stands almost 20" tall and features a twist-on fin section.

    Rookie Model Rocket Kit

    Estes Rookie Model Rocket Kit

    There is nothing "rookie" about the Estes Rookie rocket. Quick to assembe and a high flier, the Rookie is powered by standard engines and can reach heights over 500 feet. And if you want to go really high, add the BT-60 Booster Accessory (sold separately) and a D12-0 booster engine then watch this rocket soar.

    Satellite Silver Model Rocket Kit

    Estes Satellite Silver Model Rocket Kit

    Estes's Satellite Silver rocket is styled like a flying crayon. Just insert an engine, twist on the fin unit, attach the shock cord to the nose cone, and you are ready for launch.

    A couple of minutes of your time and you are on the flying field ready to blast off. Standing almost 20 inches tall, this rocket goes well over 500 feet.

    Savage Model Rocket Kit

    Estes Savage Model Rocket Kit

    The Estes Savage is an easy-to-build two-stage rocket. It provides an excellent introduction to multi-stage rocketry.

    Show Stopper Model Rocket Kit

    Estes Show Stopper Model Rocket Kit

    The Estes Show Stopper is almost ready to fly when you receive it.  It features a bright chrome body and files on 24mm C and D motors for impressive lift-offs.

    Shuttle Xpress Model Rocket Kit

    Estes Shuttle Xpress Model Rocket Kit

    The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.

    The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.

    After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!

    The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.

    Sky Cruiser Model Rocket Kit

    Estes Sky Cruiser Model Rocket Kit

    The Estes Sky Cruiser is an easy-to-assemble model rocket kit featuring a plastic fin unit and self-stick decals.

    Sky Twister Model Rocket Kit

    Estes Sky Twister Model Rocket Kit

    The easy-to-assemble Sky Twister features a nose cone with helicopter recovery. The nose cone deploys rotor blades and spins back to earth while the rest of the rocket returns under a parachute.

    SLV Model Rocket Kit

    Estes SLV Model Rocket Kit

    The Estes SLV will blast off the launch pad and reach heights of 1000 feet when powered by an E12-4 engine! That's called "extreme altitude". Standing over 34 inches tall, this "Satellite Launch Vehicle" is very impressive on the launch pad and even more so in the sky. High quality body tubes and laser cut wood fins are just some of the outstanding features of this kit.

    Solar Starters

    Estes Solar Starters

    This is a package of six Estes Starters that are used to safely ignite your model rocket motors. These are spares or replacements for the starters which are included with Estes's engines.

    No hazardous materials are used in Estes Starters which means they may be shipped via regular carriers with no extra fees or special handling required.
    Space Eagle Model Rocket Kit

    Estes Space Eagle Model Rocket Kit

    The Estes Space Eagle is simple to build and exciting to fly. Standing over 26 inches (66 cm) tall, the Space Eagle is sure to be a crowd pleaser.

    Space Twister Model Rocket Kit

    Estes Space Twister Model Rocket Kit

    Take to the skies with the Space Twister and watch this rocket climb 900 feet when launched on a C6-5 engine. Unique fins make for a spinning rocket, thus the name Space Twister. A pretty simple build but be sure and take your time on the fins so you get that fun and unique spin effect.

    Spectra Model Rocket Kit

    Estes Spectra Model Rocket Kit

    Assembling the Spectra is as simple as sliding the fins into the fin can. This almost-ready-to-fly rocket will reach altitudes of 550 feet on a C motor.  Add the BT-60 Booster Accessory (sold separately) and watch the Spectra soar way past 1250 feet as a two-stage rocket.

    Star Orbiter Model Rocket Kit

    Estes Star Orbiter Model Rocket Kit

    The Estes Star Orbiter flies on Estes's black powder E and F motors. This kit includes laser-cut wood fins, a screw-on motor retainer, and a parachute.

    Star Stryker Model Rocket Kit

    Estes Star Stryker Model Rocket Kit

    The Star Stryker is a striking, but easy to build, rocket from Estes.

    Star Trooper Model Rocket Kit

    Estes Star Trooper Model Rocket Kit

    The Estes Star Trooper is a new version of the classic Centuri kit.

    Cruise the galaxy in style with the Star Trooper. This small rocket is able to fly up to 900 feet. It is a great rocket for beginners or any rocketeer looking to spice up their collection.

    Starbase Starcruiser Model Rocket Kit (OOP)

    Estes Starbase Starcruiser Model Rocket Kit (OOP)

    The Starbase Starcruiser was produced by Estes in 1995 specifically for the US Department of Defense's STARBASE youth program.

    STARBASE is an educational program, sponsored by the Office of the Assistant Secretary of Defense for Reserve Affairs. STARBASE students participate in challenging "hands-on, mind-on" activities in Science, Technology, Engineering, and Math.

    This kit is still in the original, plain plastic bag, packaging. It features a plastic fin set and a large, self-stick decal sheet.

    Starship Nova Model Rocket Kit

    Estes Starship Nova Model Rocket Kit

    Another return of a classic. The Estes Starship Nova is back!

    Stormcaster Model Rocket Kit

    Estes Stormcaster Model Rocket Kit

    The Stormcaster is one of the largest Skill Level 1 rockets. It's an impressive 30 inches tall with sleek good looks.

    Stratocruiser Model Rocket Kit

    Estes Stratocruiser Model Rocket Kit

    A Skill Level 1 kit, the Stratocruiser looks massive but is an easy builder. Use the really cool color scheme shown or create your own! Either way, the waterslide decals included add a nice finishing touch to your rocket.

    Launched on standard Estes Engines, this rocket can reach heights of 725 feet. A preassembled parachute makes for a soft landing. Repack the parachute, grab a new engine and you're ready for another launch!

    Super Big Bertha Model Rocket Kit

    Estes Super Big Bertha Model Rocket Kit

    Standing over 36 inches tall, the Pro Series II Super Big Bertha comes with the quick-release motor retention system just as the other Pro Series kits do. Construction of this kit is not difficult and the altitudes you will reach are very impressive. Building and finish work can easily be accomplished over a few days. This is an update of the kit originally instroduced in 1990.

    Super Neon Model Rocket Kit

    Estes Super Neon Model Rocket Kit

    The Estes Super Neon features special "tubular flight stabilizers" which will make this rocket a favorite to build and fly. Watch the Super Neon model rocket soar to heights of almost 1000 feet using standard Estes motors.

    Super Neon XL Model Rocket Kit

    Estes Super Neon XL Model Rocket Kit

    The Estes Super Neon XL is a large, impressive rocket. It's space-age multi-tube fin design provides superior flight stability and a one-of-a-kind look. The Super Neon XL is a gigantic, more-powerful upscaled version of the Estes Super Neon.

    The Super Neon XL features laser cut wood parts, a high-quality wood nose cone, neon waterslide decals, and top quality Estes body tubes. These features combine to guarantee outstanding flight performance. Towering over most rockets at 37 inches, the XL lifts off on powerful Estes D and E engines. It returns smoothly to earth under a vivid 24-inch parachute.

    Super Nova Model Rocket Kit

    Estes Super Nova Model Rocket Kit

    The Estes Super Nova is a two-stage payload rocket. Feauring a clear payload section and parachute recovery, the Super Nova kit includes laser-cut wood fins.

    Tercel Model Rocket Kit

    Estes Tercel Model Rocket Kit

    The Tercel is an amazing boost glider! A great addition to any rocketeers collection, watch it soar over 700 feet high and glide gently back to Earth. This glider is able to soar for over a minute.

    Trajector Model Rocket Kit

    Estes Trajector Model Rocket Kit

    With a futuristic rocketship design, the Trajector is an easy-to-build entry in Estes's Pro Series II series of larger model rockets.  Flying on 29mm E and F motors, the Trajector features a plastic nose cone, plastic fins, self-stick decals, a screw-on motor retainer and an 18" nylon parachute. The Pro Series II E2X Booster (not included) may be used with the Trajector to create a two-stage rocket that can reach more than 3000' in altitude.

    Tube Cutting Guides

    Estes Tube Cutting Guides

    These heavy-duty plastic guides slip easily onto your standard Estes-size body tubes and allow for precision cuts to specific lengths. This set includes five guides to fit BT-5, BT-20, BT-50, BT-55 and BT-60 body tubes.

    These guides help ensure that you make a clean, straight cut using your razor knife (not included).

    Twin Factor Model Rocket Kit

    Estes Twin Factor Model Rocket Kit

    Using economical mini-engines, the Twin Factor can be flown as a single-stage or as a two-stage rocket. This saucer-inspired kit features laser-cut cardstock and waterslide decals.

    Ultimate Tube Marking Guide

    Estes Ultimate Tube Marking Guide

    The Ultimate Tube Marking Guide makes it easier to draw straight lines down the side of BT-5 through BT-80 diameter body tubes.  It includes several raised ridges of varying height which allows you to pick the best one to use for the greatest accuracy.

    UP Aerospace Spaceloft Model Rocket Kit Bulk Pack (12)

    Estes UP Aerospace Spaceloft Model Rocket Kit Bulk Pack (12)

    The Estes Spaceloft is an easy to assemble flying model rocket based on the design of the UP Aerospace Spaceloft XL sounding rocket.

    This is a bulk package of 12 rocket kits.

    V-2 Semi-Scale Model Rocket Kit

    Estes V-2 Semi-Scale Model Rocket Kit

    Powered by C11, D12 and E9 engines, the Estes V2 kit is a flying scale model of the Aggregat-4 ballistic missile developed by the Germans during World War II. After the war, the US used the V-2 as a research rocket to kick-start its rocket development program.

    Vagabond Model Rocket Kit

    Estes Vagabond Model Rocket Kit

    Standing almost three feet tall, the Estes Vagabond can reach heights of 1275 feet. Launched on D and E engines, this rocket is sure to be a crowd-pleaser.

    Vector Force Model Rocket Kit

    Estes Vector Force Model Rocket Kit

    Standing over two feet tall, the Estes Vector Force is a simple to build and finish rocket. The kit features high-quality laser-cut balsa fins, waterslide decals, and easy-to-follow instructions.

    Viking Model Rocket Bulk Pack (12 Kits)

    Estes Viking Model Rocket Bulk Pack (12 Kits)

    The Estes Viking can be easily assembled with 48 possible different fin configurations. The kit\'s five special, die-cut card stock fins allow you to create a rocket that\'s truly unique. Take your pick on how you want your rocket to look; fins up, fins down or fins whatever way. You call it, it\'s your day to be the rocket designer.

    Customize your own rocket...no matter how you place the fins, it still offers the ultimate in high performance model rocket flight. This Skill Level 1 rocket kit includes a single-piece body tube, molded nose cone, and self-stick decals.

    The Viking is just over 12 inches tall. When flown on standard engines, the Viking is able to reach amazing launch heights over 1600 feet and land safely with its bright orange streamer.

    The versatile Viking can be built in an afternoon and is a great rocket for beginners, class projects, clubs and rocket demonstrations.

    Viking Model Rocket Kit

    Estes Viking Model Rocket Kit

    The Estes Viking rocket offers 48 possible fin configurations and flies on standard model rocket engines. The Viking is a good kit for the beginner.

    Waterslide Decal Set

    Estes Waterslide Decal Set

    Estes's waterslide decal set includes three colorful 5-inch by 10-inch sheets each with different decals on them.

    Wizard Model Rocket Kit

    Estes Wizard Model Rocket Kit

    The Estes Wizard is an easy-to-assemble, Skill Level 1 kit with a one-piece body tube, laser-cut wood fins, and a bullet-shaped plastic nose cone. The self-stick decals are sure to make this mystic rocket the envy of everyone at your local launch field. The Wizard is a great rocket for beginners, schools, clubs and rocket demonstrations.

    Xarconian Cruiser Model Rocket Kit

    Estes Xarconian Cruiser Model Rocket Kit

    The next generation in planetary defense is the Xarconian Cruiser. It is capable of both planetary and space flight. The cruiser's Hyper-Plasma engine pods serve as booth propulsion and offensive weaponry.

    Estes's flying model of this future interplanetary spaceship contains many details that a craftsman modeler will enjoy. This Skill Level 5 rocket flies over 500 feet and returns safely to earth under an 18-inch parachute.

    Zinger Model Rocket Kit (OOP)

    Estes Zinger Model Rocket Kit (OOP)

    Estes last produced the Zinger kit in the late 1990s. This out-of-production model rocket kit is easy-to-build and flies on standard motors.



Copyright © 2018 JonRocket.com LLC