Your Shopping Cart is empty

Recovery = Helicopter

    Cosmic Cobra Model Rocket Kit

    Estes Cosmic Cobra Model Rocket Kit

    You'll be amazed when the rocket returns to earth with a parachute while the nose cone helicopters down.

    The Cosmic Cobra streaks to altitudes over 500 feet high. Two recovery devices are used to tame this reptile. The main rocket, with upswept fins, returns to earth on a colorful 12 inch parachute while the sleek nose cone helicopters down on bright colored, retractable rotor blades. Assembly of the Cobra takes about one hour or less, making it a great choice for any beginner! You'll draw a crowd at the flying field when you blast this unique rocket into space!

    Flip Flyer Model Rocket Kit

    Estes Flip Flyer Model Rocket Kit

    The Estes Flip Flyer is an easy-to-assemble kit featuring parachute and helicopter recovery. The nose of the rocket returns to earth under a parachute while the body deploys rotors and returns like a helicopter.

    Helicat Launch Set

    Estes Helicat Launch Set

    In just a few minutes you will have this rocket ready for the launch pad. The Estes HeliCAT features a unique helicopter nose cone recovery that is a blast to watch land.

    You will need glue and plastic cement, but assembly of the HeliCAT is easy and no painting is necessary. Powered by standard Estes engines, this quickly built rocket reaches heights of over 500 feet.

    This is a launch set which includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. Batteries, rocket motors, and other launch supplies are not included.

    Mini "A" Heli Model Rocket Kit

    Estes Mini "A" Heli Model Rocket Kit

    Test your building skills with this contest-quality kit from Estes. The Mini "A" Heli deploys blades at apogee for helicopter recovery.

    Quinstar Model Rocket Kit

    Estes Quinstar Model Rocket Kit

    The Estes Qunstar flying model rocket kit includes precision-cut wood pieces. The helicopter-recovery saucer spins on the way up as well as during recovery.

    Sky Twister Model Rocket Kit

    Estes Sky Twister Model Rocket Kit

    The easy-to-assemble Sky Twister features a nose cone with helicopter recovery. The nose cone deploys rotor blades and spins back to earth while the rest of the rocket returns under a parachute.

    Cyclone Model Rocket Kit

    Odd'l Rockets Cyclone Model Rocket Kit

    Based on research and a design by Jonathan Wayne Mills, Ph.D, the Odd'l Rocket's Cyclone features amazing two-part helicopter recovery.  While the bottom section helicopters to earth, the top section spins down like a Mapleseed.

    Mega Vortico Model Rocket Kit

    Rocketarium Mega Vortico Model Rocket Kit

    Propelled by a 24mm D, E, or F motor, the Mega Vertico flies straight up while spinning. Then it helicopters down for a smooth, safe landing.

    This kit comes with seven (7) pieces of precision-cut lightweight plywood, a launch lug, and motor tube. Fully illustrated instructions make assembly a breeze. Painting the rocket is optional.

    If you're looking to mix up your rocket fleet, take the Mega Vortico for a spin.

    Use a short (one foot long) launch rod or use a stand-off so that the rocket is launched from the top of a longer rod. Do not launch the Mega Vertico on windy days.

    Terraformer Model Rocket Kit

    Rocketarium Terraformer Model Rocket Kit

    The Terraformer is another unique rocket from Rocketarium.

    The century-long BioWars of 2400 left many a world uninhabitable. Humans quickly became an endangered species, left with few planets to call home. In an effort to reverse mankind's gravest error, autonomous Terraformer droids are sent on interplanetary missions to locate planets meeting strict criteria. These chosen planets are to be transformed into a new hope for future generations. Join this noble effort and order your own Terraformer rocket today.

    This oddroc kit contains 17 pre-cut poplar plywood pieces.

    Fly this rocket from a short (1 foot) launch rod. The usable area of a longer launch rod can be shortened using a clothespin.

    Turbo Vortico Model Rocket Kit

    Rocketarium Turbo Vortico Model Rocket Kit

    The Turbo Vortico is a three-blade, upscale version of Rocketarium's Vortico 'copter-style rocket. Like it's smaller cousin, the Turbo Vortico flies straight up while spinning then helicopters down for a smooth landing. The Turbo Vortico flies on 29mm E to G motors.

    This oddroc kit comes with six (6) pieces of laser-cut plywood, a heavy-wall motor tube, and a 1/4" launch lug. Fully illustrated instructions make assembly a breeze.

    Vortico Odd-Roc Model Rocket Kit

    Rocketarium Vortico Odd-Roc Model Rocket Kit

    Looking for something different? Give this oddroc a whirl! The Vortico shoots straight up into the sky and starts spinning. That motion results in helicoptering on the way down for a smooth landing. This oddroc consists of seven pre-cut plywood pieces, motor tube, and launch lug. The clearly illustrationed instructions make the Vortico rocket easy to assemble. The Vortico doesn't land far from where it took off. This is a great rocket for a launch site with a small recovery area.

    This rocket should not be flown on windy days. Use a short (1 foot) launch rod

    Gyroc Model Rocket Kit

    Semroc Gyroc Model Rocket Kit

    Semroc reproduction of Estes's classic Gyroc model rocket kit flies on smaller, less expensive mini-engines.

    Heli-Roctor Model Rocket Kit

    Semroc Heli-Roctor Model Rocket Kit

    This helicopter recovery rocket uses the "fin drop" method of releasing the rotors for recovery.



Copyright © 2020 JonRocket.com LLC