Your Shopping Cart is empty

Skill Level = 1

    Coporal (18mm) Model Rocket Kit

    Aerospace Speciality Products Coporal (18mm) Model Rocket Kit

    The Corporal was the first guided missile put into use by the U. S. Army. Originally designed as a test vehicle to study the problems associated with long range rockets, the Corporal was later turned into a tactical battlefield missile capable of carrying either a conventional or nuclear warhead. The first test vehicle was flown in 1947. Full production vehicles made their appearance in the summer of 1952. The basic design saw some modifications until the Corporal was retired in 1964.

    ASP's model features a balsa nose cone and balsa conduits, basswood fins, and decals.

    Coporal (24mm) Model Rocket Kit

    Aerospace Speciality Products Coporal (24mm) Model Rocket Kit

    The Corporal was the first guided missile put into use by the U. S. Army. Originally designed as a test vehicle to study the problems associated with long range rockets, the Corporal was later turned into a tactical battlefield missile capable of carrying either a conventional or nuclear warhead. The first test vehicle was flown in 1947. Full production vehicles made their appearance in the summer of 1952. The basic design saw some modifications until the Corporal was retired in 1964.

    ASP's model features a balsa nose cone and balsa conduits, basswood fins, and decals. Designed to fly on 24mm C, D, and E motors, this single-stage rocket can also fly on select 18mm using an adapter (not included).

     With the the included decals, no masking is required when painting this impressive model.

    D-Region Tomahawk (13mm) Model Rocket Kit

    Aerospace Speciality Products D-Region Tomahawk (13mm) Model Rocket Kit

    The D-Region Tomahawk was flown early in 1968. The rocket flew into the "D" layer of the ionosphere, thus the name "D-Region." Tomahawk rockets are used to this day as the upper stage of many sounding rocket flights.

    The D-Region Tomahawk has long been a favorite of scale modelers. ASP's "peanut scale" kit flies on 13mm mini-engines and features basswood fins, balsa nose cone, decals, and streamer recovery.

    ISQY Tomahawk (13mm) Model Rocket Kit

    Aerospace Speciality Products ISQY Tomahawk (13mm) Model Rocket Kit

    The first IQSY (International Quiet Sun Year) Tomahawk was first flown in 1963. Four single stage flights took place between 1963 and 1964. The Tomahawk served as the upper stage of many Nike Tomahawk flights during the International Quiet Sun Year (IQSY) of 1964 - 1965.

    The IQSY Tomahawk has long been a favorite subject for scale modelers. ASP's mini-engine kit features basswood fins, balsa nose cone and decals. A bright plastic streamer brings the model back to earth for repeated missions.

    Kappa-7-1 (18mm) Model Rocket Kit

    Aerospace Speciality Products Kappa-7-1 (18mm) Model Rocket Kit

    The Kappa-7 was designed as a booster for Japan's later Kappa-8 and Kappa-9 rockets as well as being used as a single-stage sounding rocket. It was determined, however, that the vehicle was unsuitable as a single-stage rocket. The lone Kappa-7 flight was made on November 18, 1959 to confirm the motor's suitability as a booster. 

    ASP's model of one of Japan's early sounding rockets makes a great beginner's kit. Capable of flying on a wide range of engines, this great looking and great flying model can be flown on practically any size field.

    Kappa-9M (18mm) Model Rocket Kit

    Aerospace Speciality Products Kappa-9M (18mm) Model Rocket Kit

    The Kappa 9M is a two-stage Japanese sounding rocket. The first Kappa 9M (K-9M-1) was flown on November 12, 1962.

    ASP's single-stage scale model features basswood fins, balsa nose cone, balsa transition, and decals. This is a neat looking model that's also fairly easy to build.

    Not So Stubby (18mm) Model Rocket Kit

    Aerospace Speciality Products Not So Stubby (18mm) Model Rocket Kit

    The bigger brother of ASP's Stubby, the "Not So Stubby" is a fun, easy to build model which is ideal for flying on any size field. Like its little brother, this kit is designed with the beginner in mind, but also is a great sport flier for the more experienced modeler.

    Features laser-cut balsa fins, a balsa nose cone, quick change engine hook, and parachute recovery, the Not So Stubbyflies on easy to find 18mm A, B or C engines.

    RAM B (18mm) Model Rocket Kit

    Aerospace Speciality Products RAM B (18mm) Model Rocket Kit

    The RAM ("Radio Attenuation Measurement") B was a three-stage rocket designed to study communications during reentry after a lunar voyage.

    ASP's single-stage "Fun Scale" model of the RAM B captures the general apperance of the real vehicle, yet is easy enough for the novice modeler. Includes trim tape and self-adhesive trim material to simplify painting and detailing.

    RP-3 (24mm) Model Rocket Kit

    Aerospace Speciality Products RP-3 (24mm) Model Rocket Kit

    The RP-3 was an unguided experimental Polish rocket. Earlier versions of the RP series were used for diverse purposes such as wind studies and carrying "Rocket Mail." The RP-3 was first built in 1963 and stood over seven feet tall.

    ASP's scale model is 22" tall. This unique-looking kit is a sturdy model for D and E powered flights, yet it is still light enough to fly on selected 18mm engines with a motor adapter (not included). The kit includes laser-cut ply fins, balsa nose cone, and decal. Many who own this kit count it among their favorites.

    Sandia Sandhawk (13mm) Model Rocket Kit

    Aerospace Speciality Products Sandia Sandhawk (13mm) Model Rocket Kit

    The Sandia Sandhawk was developed as an upper stage for sounding rocket systems. The Sandhawk flew three times as a single stage rocket between 1966 and 1974.

    ASP's "Peanut Scale" model features basswood fins, balsa nose cone, wire antennas, and decals. This great looking model flies on mini A motors.

    Sky-Ferry (24mm) Model Rocket Kit

    Aerospace Speciality Products Sky-Ferry (24mm) Model Rocket Kit

    ASP's Sky-Ferry is a big (over 2 1/2 feet tall!), easy-to-build model rocket. The Sky-Ferry makes a great first or second rocket kit. Designed with the beginner in mind, it's also a great sport flier for the more experienced modeler.

    The Sky-Ferry features balsa fins, a balsa nose cone, a big payload section (it will hold many commercial electronics), a quick change engine hook, and a bright parachute for recovery. Designed to fly primarily on 24mm engines, it can also fly on 18mm engines with an adapter (not included).

    Sonda II B (18mm) Model Rocket Kit

    Aerospace Speciality Products Sonda II B (18mm) Model Rocket Kit

    The Sonda II B is the largest of Brazil's series of Sonda II sounding rockets. The Sonda II was first flown during the early 1970s and continues in use today. 

    Ease of construction and painting makes ASP's model of the Brazilian sounding rocket a great first scale kit.

    Stubby (13mm) Model Rocket Kit

    Aerospace Speciality Products Stubby (13mm) Model Rocket Kit

    ASP's Stubby is a cute, fun, and easy to build model. It is ideal for flying on small fields and makes a great first or second rocket kit.

    Designed with the beginner in mind, The Stubby is also a great sport flier for the more experienced modeler. Designed to fly on economical 13mm "Min Engines," ASP's Stubby features laser-cut balsa fins, a balsa nose cone, quick change engine hook, and a bright parachute for recovery.

    That Tube Rocket (18mm) Model Rocket Kit

    Aerospace Speciality Products That Tube Rocket (18mm) Model Rocket Kit

    ASP's That Tube Rocket flies without the use of standard fins. Very easy to build, That Tube Rocket includes a quick-change engine hook that makes it easy to fly over and over. Features ASP's usual top-quality components and outstanding instructions.

    V-2 (13mm) Model Rocket Kit

    Aerospace Speciality Products V-2 (13mm) Model Rocket Kit

    The V-2 ("Vengeance Weapon 2") is perhaps the most famous, and certainly the most infamous, rocket ever built. Designed by Werner von Braun for the Nazi war effort during WWII, the V-2 was the world's first large liquid-fueled rocket.

    After the war, many captured V-2s were flown by the U.S. as well as the Soviet Union. Despite its horrific inception as a weapon of destruction, the V-2 was the forerunner of all the large liquid-fuel rockets which were to follow.

    At just 7 3/4" tall, ASP's model is true to scale and features a balsa boattail, balsa nose cone and laser-cut basswood fins.

    V-2 (18mm) Model Rocket Kit

    Aerospace Speciality Products V-2 (18mm) Model Rocket Kit

    The V-2 ("Vengeance Weapon 2") is perhaps the most famous, and certainly the most infamous, rocket ever built. Designed by Werner von Braun for the Nazi war effort during WWII, the V-2 was the world's first large liquid-fueled rocket. After the war, many captured V-2s were flown by the U.S. as well as the Soviet Union. Despite its horrific inception as a weapon of destruction, the V-2 was the forerunner of all the large liquid-fuel rockets which were to follow.

    Featuring a balsa boattail, balsa nose cone, and laser-cut basswood fins, ASP's 11 1/4" tall model is true to scale and flies on standard A thru C motors.

    WAC Corporal (24mm) Model Rocket Kit

    Aerospace Speciality Products WAC Corporal (24mm) Model Rocket Kit

    The WAC Corporal was the United States first sounding rocket. Seventeen WAC and WAC B rockets were flown from 1945 to 1947. The WAC was launched with the aid of the Tiny Tim solid propellant booster. After the booster burned out it fell away and the liquid fuel propelled sustainer stage continued its upward flight.

    ASP's 24mm WAC Corporal is a single-stage "Fun Scale" model of the historic rocket. Designed to fly on D and E motors, it's still light enough to fly on selected 18mm motors with an adapter (not included).

    A.T.W. Model Rocket Kit

    Custom Rocket A.T.W. Model Rocket Kit

    The ATW is a scale-like model of the Army's next-generation ultra powerful anti-tank weapon. Features include an injection-molded plastic nose cone, die-cut balsa fins, streamer recovery, and pressure-sensitive decals.

    Atomic Model Rocket Kit

    Custom Rocket Atomic Model Rocket Kit

    The Atomic is a six-finned rocket with fifties retro styling. It features an injection-molded plastic nose cone, die-cut balsa fins, parachute recovery, pressure-sensitive decals, and a quick-release engine mount for fast engine changes. Flights of over 1000 feet are possible with a C6-7 motor.

    Fiesta Model Rocket Kit

    Custom Rocket Fiesta Model Rocket Kit

    The Fiesta lives up to its name. It is a fun sport rocket with wild decals. Easy to build and fly, it makes a great beginner kit. Features an injection-molded plastic nose cone, die-cut balsa fins, streamer recovery, pressure sensitive decals, and aquick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.

    Freedom Model Rocket Kit

    Custom Rocket Freedom Model Rocket Kit

    Custom Rocket's Freedom is a patriotic kit which is easy to build and fly. It makes a great beginner kit. Features injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, self-adhesive decals, and a quick-release engine mount. Flights of over 1,000 feet are possible when flown with a C6-7 motor.

    Freestyle Model Rocket Kit

    Custom Rocket Freestyle Model Rocket Kit

    Colorful graphics set the Custom Rocket Freestyle kit apart from the rest. The kit includes an injection-molded nose cone, quick-release engine mount, laser-cut balsa fins, a 12" parachute and self-adhesive decals. Flights to 750 feet.

    Galaxy Patrol Model Rocket Kit

    Custom Rocket Galaxy Patrol Model Rocket Kit

    Keeping our universe safe since 2080. Features injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, quick-release engine mount, and detailed pressure-sensitive decals.

    Galaxy Rescue Model Rocket Kit

    Custom Rocket Galaxy Rescue Model Rocket Kit

    First on the scene of any emergency. Features injection-molded plastic nose cone, laser-cut balsa fins, and streamer recovery. Impressive self-adhesive decals and quick-release engine mount. Super high flier can reach altitudes over 1,000 feet.

    Galaxy Taxi Model Rocket Kit

    Custom Rocket Galaxy Taxi Model Rocket Kit

    Space taxi! Small details make this an excellent display model for your collection. Features injection-molded plastic nose cone, quick-release engine mount, laser-cut balsa fins, streamer recovery, and large pressure-sensitive decal.

    Game Over Model Rocket Kit

    Custom Rocket Game Over Model Rocket Kit

    Flashback to the early 80s with Custom's Game Over flying model rocket kit. The 8-bit graphics on the decals remind us of the decade of video games and MC Hammer pants. This kit features an injection nose cone, laser-cut fins, streamer recovery, pressure-sensitive decals, and a quick-release engine mount. Flights over 1000 feet are possible.

    Ion Pulsar Model Rocket Kit

    Custom Rocket Ion Pulsar Model Rocket Kit

    The Custom Ion Pulsar is a futuristic kit with super detailed parts. It features an injection-molded plastic nose cone, laser-cut balsa fins, a parachute, precision-printed water-slide decals, and a quick-release engine mount. Flights of over 750 feet are possible with a C6-5 motor.

    Raven Model Rocket Kit

    Custom Rocket Raven Model Rocket Kit

    The Raven is a scale-like, surface-to-air missile. The kit features an injection-molded plastic nose cone, die-cut balsa fins, 12" parachute, precision water-slide decals, and a quick-release engine mount. Flights over 1,000 feet are possible with a C6-7 motor.

    Razor Model Rocket Kit

    Custom Rocket Razor Model Rocket Kit

    This unique model uses tubes as fins. With pre-colored parts there is no painting required. Features injection-molded plastic nose cone, and 12" parachute recovery. Includes self-adhesive decals and quick-release engine mount for fast engine change. Flies over 1,000 feet with a C6-7 motor.

    Redliner Model Rocket Kit

    Custom Rocket Redliner Model Rocket Kit

    The Redliner is a sleek, long design. Easy to build and fly, it makes a great beginner kit. The kit featues an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute, precision printed water-slide decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.

    Serin Model Rocket Kit

    Custom Rocket Serin Model Rocket Kit

    The Serin is a scale-like surface-to-air missile. It looks realistic on the launch pad and in the air. Easy to build and fly, it makes a great beginner kit. The kit features a blow molded plastic nose cone, die-cut balsa fins, 12" parachute, precision water-slide decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.

    Skybird Model Rocket Kit

    Custom Rocket Skybird Model Rocket Kit

    The Skybird includes a transparent red payload tube to carry an insect or other small experiment. Easy to build and fly, the kit is great for a beginner. The Skybird features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, pressure sensitive decals, and a quick-release engine mount Flights of over 1000 feet are possible with a C6-7 motor

    Sport Model Rocket Kit

    Custom Rocket Sport Model Rocket Kit

    The super-long Sport from Custom Rocketry provides slow, realistic lift-offs. Easy to build and fly, this almost 2 1/2-foot tall rocket makes a great beginner kit. Features include an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, a pressure sensitive decal, and a quick-release engine mount. Flights of over 750 feet are possible on a C6-5 motor.

    Venture Model Rocket Kit

    Custom Rocket Venture Model Rocket Kit

    The Venture is a great kit for your first or second rocket. The kit features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, a pressure sensitive decal, and a quick-release engine mount.

    Zero Gravity Model Rocket Kit

    Custom Rocket Zero Gravity Model Rocket Kit

    The Zero Gravity is a low-priced, easy to assemble kit. It features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute, pressure-sensitive decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.


    The Zero Gravity kit may be bulk packaged in a plain, clear plastic bag rather than retail packaged.

    "Young Astronauts Club" Cadet Model Rocket Kit (OOP, 1987)

    Estes "Young Astronauts Club" Cadet Model Rocket Kit (OOP, 1987)

    Estes released the Cadet kit in 1987 to support the "Young Astronauts Club." This kit is no longer in production. It is in good condition and is still-sealed in the original packaging.

    Based on the Blazer kit, this kit features die-cut fiber fins and streamer recovery.

    Established in 1984 by the White House, the Young Astronauts Council uses space to promote interest in science, math, and technology among young people. The Council supports local Young Astronauts Chapters around the world as well as the "Young Astronauts Club" for individual memberships. The Council is a non-profit organizationand receives no government funding. It is funded by membership fees paid by its official chapters. Chapters and Club (individual) members receive official Young Astronaut membership cards and certificates containing a seal that was flown in space aboard the space shuttle.

    220 Swift Model Rocket Kit

    Estes 220 Swift Model Rocket Kit

    Is it okay to describe a rocket as "cute?" If so, then the Estes 220 Swift is cute. This tiny powerhouse rushes into the sky on a mini-motor then tumbles back to earth ready to fly again.

    3 Bandits Model Rocket Kits

    Estes 3 Bandits Model Rocket Kits

    The Estes 3 Bandits assortment includes three easy-to-assemble mini-engine rockets.

    • Length - 10.8 in. to 11.1 in. (27.4 to 28.3 cm)
    • Diameter - .74 in. (19 mm)
    • Estimated Weight - .6 to .71 oz (19.8 to 20.1 g)
    • Plastic fins, self-stick decals, 6 in. (15.2 cm) parachute recovery
    Alien Green Crayon Model Rocket Kit

    Estes Alien Green Crayon Model Rocket Kit

    The Green Alien model rocket kit is almost ready to fly. This crayon-themed rocket stands almost 20" tall and features a twist-on fin section when also acts as a motor retainer.

    Alpha III Launch Set

    Estes Alpha III Launch Set

    The Estes Alpha III Launch set includes the classic, easy-to-build Alpha III model rocket kit, a launch pad, and a controller.

    Alpha III Model Rocket Kit

    Estes Alpha III Model Rocket Kit

    The Alpha III's plastic fin assembly makes building the kit quick, easy, and almost foolproof.

    Alpha III Model Rocket Kit Bulk Pack (12)

    Estes Alpha III Model Rocket Kit Bulk Pack (12)

    This educator bulk pack contains 12 Alpha III kits. The Alpha III is one of the most reliable, easiest to build rockets. It features a dynamic look - a gloss black body tube with a fluorescent orange plastic fin unit and nose cone. The Alpha III requires no painting.

    Alpha Model Rocket Kit

    Estes Alpha Model Rocket Kit

    The Estes Alpha has introduced many millions to model rocketry since its introduction more than 35 years ago. Easy-to-build, the Alpha looks great and flies great.

    The Alpha is a classic Skill Level 1 kit. It includes a one-piece body tube, laser-cut wood fins, and an aerodynamic nose cone.

    Building the Alpha takes about an afternoon. When powered with a C engine, the rocket can reach altitudes of 1,000 feet. Recovery is accomplished with a colorful 12-inch preassembled parachute.

    Atomic Aqua Model Rocket Kit

    Estes Atomic Aqua Model Rocket Kit

    One of Estes's series of "ready-to-fly" crayon rockets, the Atomic Aqua flies to more than 500 feet on a C motor.

    Baby Bertha Model Rocket Kit

    Estes Baby Bertha Model Rocket Kit

    The Baby Bertha is a pint-sized version of the classic Big Bertha. At just under 13 inches, the Baby Bertha is about half the size of it's larger cousin. The Baby Bertha kit features laser-cut fins, a plastic nose cone, self-stick decals, and a colorful 12-inch pre-assembled parachute.

    Bandito Model Rocket Kit

    Estes Bandito Model Rocket Kit

    The Estes Bandito is a sporty, easy-to-assemble model rocket kit which flies on mini-engines.

    Big Bertha Model Rocket Kit

    Estes Big Bertha Model Rocket Kit

    The Big Bertha is a classic Estes kit. Designed by Vern Estes himself, this is one of the largest Skill Level 1 rockets. it is a great beginenr's rocket. The Big Bertha is terrific for demonstractions as its large size and steady flights on smaller motors provide slow, realistic lift-offs.

    Black Hole Model Rocket Kit

    Estes Black Hole Model Rocket Kit

    One of Estes's series of crayon-inspired rockets, the Black Hole is almost ready to fly. Standing almost 20 inches tall, this rocket goes well over 500 feet.

    Blast Off Blue Model Rocket Kit

    Estes Blast Off Blue Model Rocket Kit

    Blast off with the Estes Blast Off Blue flying model rocket. This kit comes pretty much ready to fly and soars to more than 500 feet on a C motor.

    Chrome Domes Gold Model Rocket Kit

    Estes Chrome Domes Gold Model Rocket Kit

    With gold chrome fins and nose cone, the Estes Chrome Domes Gold model rocket kit is sure to put a sparkle in your eye. A prismatic body tube completes the jewel-like appearance of this easy-to-build rocket kit.

    Chuter 2 Model Rocket Kit

    Estes Chuter 2 Model Rocket Kit

    The Estes Chuter 2 features dual parachutes which bring this classic rocket back to Earth in style after blasting off to heights of up to 900 feet. The unique fin design and colorful body of the Chuter-Two make it a great rocket for anyone.

    Estes has gone back to the archives and pulled up old drawings and spec sheets to bring back this vintage design. The kit has been reproduced and updated while retaining the classic lines of the original. The Chuter-Two kit contains high-quality body tubes, a balsa nose cone, and laser-cut balsa fins.

    Color the Sky Crayon Rockets Bulk Pack (12)

    Estes Color the Sky Crayon Rockets Bulk Pack (12)

    The Estes Color The Sky collection includes twelve crayon-themed rocket kits - each a different color.

    Each kit is easy-to-assemble with plastic fins and nose cone, self-stick decals, and a plastic parachute.

    This is a bulk package of twelve (12) kits.

    Comet Chaser Model Rocket Kit

    Estes Comet Chaser Model Rocket Kit

    The Comet Chaser soars over 1,100 feet and is powered by standard engines. Simple to glue and paint, the Comet Chaser deserves to be in your rocket collection or if you are just starting out, it's a great starter rocket. Just a few hours of your time and you'll be ready to go!

    Cosmic Cobra Model Rocket Kit

    Estes Cosmic Cobra Model Rocket Kit

    You'll be amazed when the rocket returns to earth with a parachute while the nose cone helicopters down.

    The Cosmic Cobra streaks to altitudes over 500 feet high. Two recovery devices are used to tame this reptile. The main rocket, with upswept fins, returns to earth on a colorful 12 inch parachute while the sleek nose cone helicopters down on bright colored, retractable rotor blades. Assembly of the Cobra takes about one hour or less, making it a great choice for any beginner! You'll draw a crowd at the flying field when you blast this unique rocket into space!

    Cosmic Explorer Model Rocket Kit

    Estes Cosmic Explorer Model Rocket Kit

    This sleek design from Estes features quality body tubes, a large balsa nose cone, laser-cut balsa fins, and easy-to-apply waterslide decals.

    Crossbow SST Model Rocket Kit

    Estes Crossbow SST Model Rocket Kit

    A smaller cousin of the classic Satellite Interceptor kit, the Crossbow SST can reach a height of 1600 feet on a C6-5.

    Curvilinear Model Rocket Kit

    Estes Curvilinear Model Rocket Kit

    The new Estes Curvilinear is an easy-to-build rocket which is great for flying from a small field.

    D-Region Tomahawk Model Rocket Kit

    Estes D-Region Tomahawk Model Rocket Kit

    The Estes D-Region Tomahawk is a 1/5 scale flying model of NASA's sounding rocket. Launched only one time in 1968, this rocket was designed to take measurements of the D-layer of the ionosphere - thus its name. Estes's version of this fantastic scale rocket captures all the detail of the original in an easy to assemble model that flies as good as it looks.

    In terms of performance, this gigantic rocket can blast nearly 800 feet high when powered with an E engine. An adapter is included to launch on Estes D engines. Finally, to protect this beautiful scale model when it lands, a 24-inch pre-assembled nylon parachute is included.

    Dark Zero Model Rocket Kit

    Estes Dark Zero Model Rocket Kit

    A couple of hours of your time and you're off to the flying field with the really cool Dark Zero from Estes! This kit is easy to build and all the parts are pre-colored so there's no need to bother with paint.

    Dazzler Model Rocket Kit

    Estes Dazzler Model Rocket Kit

    Slip the fins into the fin can, tie the shock cord to the nose cone and that fast, you are ready for the flying field! The Dazzler, powered by standard engines, can reach heights over 1,100 feet!

    Der Red Max Model Rocket Kit

    Estes Der Red Max Model Rocket Kit

    Der Red Max is a re-issue of the classic kit which first appeared in Estes's 1971 catalog. The rocket is a little more than 16 inches tall. It includes waterslide decals, laser-cut balsa fins, and a pre-assembled 18" parachute.

    Eliminator XL Launch Set

    Estes Eliminator XL Launch Set

    The Estes Eliminator XL rocket stands 44 inches tall. Assembly is easy, just twist the sections together. The Eliminator XL is ready to launch in just a few minutes.

    This set includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. A 3/16-inch Maxi Launch Rod is also included.

    Engines, batteries, and other supplies are not included.

    Equinox Model Rocket Kit

    Estes Equinox Model Rocket Kit

    Simple to build, the Equinox needs about an evening of your time, white or yellow glue, and paint. Standing just 15 inches (38.1 cm) tall, this jewel can soar up to 1,575 (480 m) feet!

    This one is simple to build yet impressive in looks! The Equinox is sure to get noticed at the flying field.

    Firehawk Model Rocket Kit

    Estes Firehawk Model Rocket Kit

    The Estes Firehawk is a four-finned, easy-to-assemble rocket which requires no painting. It flies on mini-engines.

    Firestorm Model Rocket Kit

    Estes Firestorm Model Rocket Kit

    The Estes Firestorm is an "Almost Ready-to-Fly" (ARTF) model rocket featuring uniquely colored plastic fins and nose cone. Just slip the fins into the fin can and the rocket is ready to prep for flight.

    Add the BT-60 Booster accessory (sold separately) to fly the Firestorm as a two-stage rocket.

    Firestreak SST Model Rocket Kit

    Estes Firestreak SST Model Rocket Kit

    The Firestreak SST is a "Simple Snap-Together" model rocket kit. About 10" long, this plastic kit can be assembled and ready to fly in 15 minutes.

    Fletcher Model Rocket Kit

    Estes Fletcher Model Rocket Kit

    The Estes Fletcher is a sleek, arrow-like rocket designed to soar to over 325 feet on mini engines. The cool black and blue styling gives this rocket a unique look.

    Flying Colors Model Rocket Kit

    Estes Flying Colors Model Rocket Kit

    Este's Flying Colors model rocket sports a fun color scheme. It's almost fully assembled when you get it.  Just slip the fins into the fin can, and it's ready to prep for launch. Add the BT-60 Booster accessory (sold separately) to convert the Flying Colors to a multi-stage rocket.

    Fractured Model Rocket Kit

    Estes Fractured Model Rocket Kit

    Easily assembled and ready for flight quickly, the Fractured doesn't require any painting. It flies up to 550 feet on a C6-3 or C6-5 engine. Add the Booster-60 accessory (sold separately) for two-stage flights.

    Gnome Model Rocket Kit

    Estes Gnome Model Rocket Kit

    The Gnome is just a little over 10 inches tall with a shiny chrome body tube and blue nose cone and fins. This great-looking, mini-engine powered cloud chaser can reach altitudes of well over 800 feet. Recovery is fast and reliable with its fluorescent streamer.

    The Gnome is one of the Estes E2X (Easy to Assemble) series of kits and features a single piece, chrome wrapped body tube, a bright blue precolored fin unit, nose cone, and upper launch lug ring. The rocket takes about 30 minutes to build and is finished off with a colorful, easy-to-apply self-stick decal. With its simple assembly and precolored parts, it's an excellent choice for the first time rocketeer.

    Helicat Launch Set

    Estes Helicat Launch Set

    In just a few minutes you will have this rocket ready for the launch pad. The Estes HeliCAT features a unique helicopter nose cone recovery that is a blast to watch land.

    You will need glue and plastic cement, but assembly of the HeliCAT is easy and no painting is necessary. Powered by standard Estes engines, this quickly built rocket reaches heights of over 500 feet.

    This is a launch set which includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. Batteries, rocket motors, and other launch supplies are not included.

    Helios Model Rocket Kit

    Estes Helios Model Rocket Kit

    The Estes Helios is an almost-ready-to-fly rocket featuring a bright silver body tube and yellow fins and nose cone. Slide the fins into the fin can and the rocket is ready to prep for flight.

    The BT-60 Booster accessory (sold separately) converts the Helios into a two-stage rocket.

    Hi-Flier Model Rocket Kit

    Estes Hi-Flier Model Rocket Kit

    The Estes Hi-Flier is one of the most extreme, super performance model rockets you can own. The Hi-Flier can easily be built in one afternoon. The Estes Hi-Flier isis capable to flights over 1,600 feet and recovers with a fluorescent orange streamer.

    Humdinger Model Rocket Kit

    Estes Humdinger Model Rocket Kit

    The Estes Humdinger is an almost-ready-to-fly mini-engine powered rocket. The Humndinger is almost two feet tall, but just a little over 1/2 inch in diameter. So, it's a sleek-looking rocket.

    Indicator Model Rocket Kit

    Estes Indicator Model Rocket Kit

    The Estes Interceptor is a simple build which flies on inexpensive mini-engines! Standing over 21 inches tall, the Indicator reaches 200 feet on an A10-3T engine.

    Jetliner Model Rocket Kit

    Estes Jetliner Model Rocket Kit

    The Estes Jetliner will remind long-time rocketeers of the Goonybirds series of rockets from the 1970s.

    Mini Fat Boy Model Rocket Kit

    Estes Mini Fat Boy Model Rocket Kit

    Estes has produced a smaller version of its classic Fat Boy model rocket kit. The Mini Fat Boy flies on 13mm motors and features parachute recovery.

    Mini Honest John Model Rocket Kit

    Estes Mini Honest John Model Rocket Kit

    The Estes Mini Honest John is a mini-engine-powered sport scale model of the U.S. battle field artillery missile. The kit features a detailed molded nose cone and laser-cut balsa fins. Simple to build, the resulting model features plenty of detail that you will be proud to display.

    Mini Max Model Rocket Kit

    Estes Mini Max Model Rocket Kit

    Estes has created a smaller version of their classic Der Red Max kit. Just like the Der Red Max, the Mini Max is uniquely designed. It has the same ballistic-shaped nose cone and stubby fins as its bigger counterpart. Standing almost 10 inches tall, this miniature version definitely has a personality all its own!

    Powered by Estes mini engines,the Mini-Maxcan reach amazing heights of 400 feet. After its aerial assault, recovery is accomplished with a high-vizability streamer.

    The new Mini Max has all the great looks of the classic version, right down to the really cool skull and crossbones decals.The Mini features a balsa nose cone, laser cut balsa fins and waterslide decals.

    Mini Mosquito Model Rocket Kit

    Estes Mini Mosquito Model Rocket Kit

    This mini-engine powered rocket stands just 3.8" tall. The Mosquito features simple and quick construction with out-of-site performance.

    Tumble recovery brings this awesome little rocket back to earth. When powered by the A10-3T mini-engine, heights of 800 feet can be reached.

    Monarch Model Rocket Kit

    Estes Monarch Model Rocket Kit

    Standing 22-inches tall, the Monarch is a big and bold beginner's rocket. The Monarch features laser-cut balsa fins and waterslide decals.

    No.2 Skywriter Model Rocket Kit

    Estes No.2 Skywriter Model Rocket Kit

    This fun No. 2 Skywriter rocket looks like a wooden pencil. The Skywriter includes colored body tubes, fins, and nose cone, so assembly is quick and easy.

    ORBIS 3D Bulk Pack

    Estes ORBIS 3D Bulk Pack

    Do you own a 3D printer? This bulk pack contains parts to assemble 12 rockets using additional parts that you create using your 3D printer. Estes provides .stl files that you can download to produce nose cones, fins, and other parts you will need to complete your rockets.

    Length: 10 - 12 in. (25.4 - 30.5 cm)

    Diameter: .74 (19 mm)

    Recommended Engines: 1781 A8-3 Bulk Pack (first flight), 1783 B6-4 Bulk Pack, 1789 C6-5 Bulk Pack, 1672 Blast-off Flight Pack

    NOTE: You will need your own 3D printer and filament to create your plastic parts. ABS filament is recommended.

    Here are links to the .stl files to use to create your own rocket parts:

    Phoenix Bird Model Rocket Kit

    Estes Phoenix Bird Model Rocket Kit

    Based on the classic Centuri Phoenix Bird kit from the late 1970s, the new Estes Phoenix Bird features through-the-wall fins and self-stick foil decals.

    Planet Purple Crayon Model Rocket Kit

    Estes Planet Purple Crayon Model Rocket Kit

    One-eyed, one-horned flying purple ... oops ... wrong flying purple thing! This is the flying purple crayon rocket from Estes. It arrives assembled and pretty much ready to fly.

    The Estes Purple Planet Crayon flies up to 500 feet on a standard C motor.

    Plasma Probe Model Rocket Kit

    Estes Plasma Probe Model Rocket Kit

    The Estes Plasma Probe captures the futuristic design of Centuri kits from the 1970s.

    Puma RTF Model Rocket Kit

    Estes Puma RTF Model Rocket Kit

    The mini-engine Estes Puma can reach altitudes of well over 800 feet . Recovery is reliable with its fluorescent streamer for easy tracking!

    The Estes Puma is a brightly colored, ready to fly, mini engine powered speedster. The slender, long lines of this rocket provide the beginning or seasoned rocketeer a high intensity model rocket flying experience! The Puma is just a little over 10 inches tall and is factory assembled and decorated. This mini engine powered cloud chaser can reach altitudes of well over 800 feet. Recovery is safe and reliable with its fluorescent colored streamer for easy tracking after a ballistic flight! The Puma is high performance model rocket flying fun of the easiest kind. It's a great rocket to take to the flying field when you are short on time, but want to fly! For cloud scratching performance, get the Puma ready to fly rocket.

    Quark Model Rocket Kit

    Estes Quark Model Rocket Kit

    The Estes Quark is a cool little rocket. Easy-to-build, the Quark soars up to 700 feet on a mini-engine.

    Red Rider Model Rocket Kit

    Estes Red Rider Model Rocket Kit

    Red Rider is another of Este's new almost-ready-to-fly rockets. Assembly consists of little more than sliding the fins into the fin can. The Red Rider is a single-stage rocket, but you can add the BT-55 Booster accessory (sold separately) to convert it to a two-stage rocket.

    Reflector Model Rocket Kit

    Estes Reflector Model Rocket Kit

    The easy-to-assemble Estes Reflector has a large payload section, laser-cut fins, and waterslide decals.

    Reliant Model Rocket Kit (OOP)

    Estes Reliant Model Rocket Kit (OOP)

    Estes produced the Reliant from about 1993 to 1997. It's a nice-looking Skill Level 1 rocket with die-cut fins.

    This kit is out of production and supplies are limited.

    Ricochet Model Rocket Kit

    Estes Ricochet Model Rocket Kit

    This Skill Level 1 rocket is part of Estes's "Basic Builder Series."It is simple to build and paint, but features distinctive Air-to-Air missile styling. The Ricochet flies up to 1125 feet on a C motor.

    Rocket Red Crayon Model Rocket Kit

    Estes Rocket Red Crayon Model Rocket Kit

    Rocket Red is a RTF crayon-themed rocket. It stands almost 20" tall and features a twist-on fin section.

    Rookie Model Rocket Kit

    Estes Rookie Model Rocket Kit

    There is nothing "rookie" about the Estes Rookie rocket. Quick to assembe and a high flier, the Rookie is powered by standard engines and can reach heights over 500 feet. And if you want to go really high, add the BT-60 Booster Accessory (sold separately) and a D12-0 booster engine then watch this rocket soar.

    Satellite Silver Model Rocket Kit

    Estes Satellite Silver Model Rocket Kit

    Estes's Satellite Silver rocket is styled like a flying crayon. Just insert an engine, twist on the fin unit, attach the shock cord to the nose cone, and you are ready for launch.

    A couple of minutes of your time and you are on the flying field ready to blast off. Standing almost 20 inches tall, this rocket goes well over 500 feet.

    Savage Model Rocket Kit

    Estes Savage Model Rocket Kit

    The Estes Savage is an easy-to-build two-stage rocket. It provides an excellent introduction to multi-stage rocketry.

    Sequoia Model Rocket Kit

    Estes Sequoia Model Rocket Kit

    Standing just over 20 inches tall, this mini engine powered rocket packs some punch when launched on an A10-3T. The Sequoia is quick off the launch pad and soars to 350 feet so you better keep your eyes open when it takes off.

    Shattered Model Rocket Kit

    Estes Shattered Model Rocket Kit

    Standing almost 3 feet tall, the Etses Shattered features a clear body tube in the middle of the rocket and a colorful parachute for recovery. Powered by standard engines, this easy-to-assemble rocket won't take long to build so you will have more time for fun.

    Show Stopper Model Rocket Kit

    Estes Show Stopper Model Rocket Kit

    The Estes Show Stopper is almost ready to fly when you receive it.  It features a bright chrome body and files on 24mm C and D motors for impressive lift-offs.

    Shuttle Xpress Model Rocket Kit

    Estes Shuttle Xpress Model Rocket Kit

    The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.

    The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.

    After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!

    The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.

    Sky Twister Model Rocket Kit

    Estes Sky Twister Model Rocket Kit

    The easy-to-assemble Sky Twister features a nose cone with helicopter recovery. The nose cone deploys rotor blades and spins back to earth while the rest of the rocket returns under a parachute.

    Space Eagle Model Rocket Kit

    Estes Space Eagle Model Rocket Kit

    The Estes Space Eagle is simple to build and exciting to fly. Standing over 26 inches (66 cm) tall, the Space Eagle is sure to be a crowd pleaser.

    Space Twister Model Rocket Kit

    Estes Space Twister Model Rocket Kit

    Take to the skies with the Space Twister and watch this rocket climb 900 feet when launched on a C6-5 engine. Unique fins make for a spinning rocket, thus the name Space Twister. A pretty simple build but be sure and take your time on the fins so you get that fun and unique spin effect.

    Spectra Model Rocket Kit

    Estes Spectra Model Rocket Kit

    Assembling the Spectra is as simple as sliding the fins into the fin can. This almost-ready-to-fly rocket will reach altitudes of 550 feet on a C motor.  Add the BT-60 Booster Accessory (sold separately) and watch the Spectra soar way past 1250 feet as a two-stage rocket.

    Star Trooper Model Rocket Kit

    Estes Star Trooper Model Rocket Kit

    The Estes Star Trooper is a new version of the classic Centuri kit.

    Cruise the galaxy in style with the Star Trooper. This small rocket is able to fly up to 900 feet. It is a great rocket for beginners or any rocketeer looking to spice up their collection.

    Starbase Starcruiser Model Rocket Kit (OOP)

    Estes Starbase Starcruiser Model Rocket Kit (OOP)

    The Starbase Starcruiser was produced by Estes in 1995 specifically for the US Department of Defense's STARBASE youth program.

    STARBASE is an educational program, sponsored by the Office of the Assistant Secretary of Defense for Reserve Affairs. STARBASE students participate in challenging "hands-on, mind-on" activities in Science, Technology, Engineering, and Math.

    This kit is still in the original, plain plastic bag, packaging. It features a plastic fin set and a large, self-stick decal sheet.

    Stormcaster Model Rocket Kit

    Estes Stormcaster Model Rocket Kit

    The Stormcaster is one of the largest Skill Level 1 rockets. It's an impressive 30 inches tall with sleek good looks.

    Stratocruiser Model Rocket Kit

    Estes Stratocruiser Model Rocket Kit

    A Skill Level 1 kit, the Stratocruiser looks massive but is an easy builder. Use the really cool color scheme shown or create your own! Either way, the waterslide decals included add a nice finishing touch to your rocket.

    Launched on standard Estes Engines, this rocket can reach heights of 725 feet. A preassembled parachute makes for a soft landing. Repack the parachute, grab a new engine and you're ready for another launch!

    UP Aerospace Spaceloft Model Rocket Kit Bulk Pack (12)

    Estes UP Aerospace Spaceloft Model Rocket Kit Bulk Pack (12)

    The Estes Spaceloft is an easy to assemble flying model rocket based on the design of the UP Aerospace Spaceloft XL sounding rocket.

    This is a bulk package of 12 rocket kits.

    Vector Force Model Rocket Kit

    Estes Vector Force Model Rocket Kit

    Standing over two feet tall, the Estes Vector Force is a simple to build and finish rocket. The kit features high-quality laser-cut balsa fins, waterslide decals, and easy-to-follow instructions.

    Viking Model Rocket Kit

    Estes Viking Model Rocket Kit

    The Estes Viking rocket offers 48 possible fin configurations and flies on standard model rocket engines. The Viking is a good kit for the beginner.

    Wizard Model Rocket Bulk Pack (12 Kits)

    Estes Wizard Model Rocket Bulk Pack (12 Kits)

    The Estes Wizard flying model rocket kit conjures up magical, high-flying flights time after time.
    Used by thousands of schools and clubs nationwide, the Wizard is a favorite for school, scouts, and
    other group projects. The Wizard is a great introduction to model rocketry. I has laser-cut fins
    and a self-stick decal. There's no engine mount to assemble because the engine is friction-fitted
    snuggly into the body tube. This model also requires simple painting.

    • Skill Level: 1
    • Length: 12 inches
    • Diameter: 0.74 inches
    • Weight: 0.5 ounces
    • Fins: Laser-cut Wood
    • Decals: Self-stick Decals
    • Recovery: Streamer

    Recommended Motors: 1/2A6-2, A8-3, A8-5, B4-4, B6-4, B6-6, C6-5, C6-7

    This is a bulk package containing 12 rocket kits.

    Wizard Model Rocket Kit

    Estes Wizard Model Rocket Kit

    The Estes Wizard is an easy-to-assemble, Skill Level 1 kit with a one-piece body tube, laser-cut wood fins, and a bullet-shaped plastic nose cone. The self-stick decals are sure to make this mystic rocket the envy of everyone at your local launch field. The Wizard is a great rocket for beginners, schools, clubs and rocket demonstrations.

    Zinger Model Rocket Kit (OOP)

    Estes Zinger Model Rocket Kit (OOP)

    Estes last produced the Zinger kit in the late 1990s. This out-of-production model rocket kit is easy-to-build and flies on standard motors.

    Big Honkin' Rocket

    FlisKits Big Honkin' Rocket

    What's in a name?  FlisKit's "Big Honkin' Rocket" stands a staggering 3.26 inches tall.  This kit contains the parts to build three Big Honkin' Rockets.  This tiny performer flies on MicroMaxx II motors.

    Rhino Model Rocket Kit

    FlisKits Rhino Model Rocket Kit

    FlisKits designed the Rhino as a rocket to help educators. The kit is designed to be simple to build yet teach important skills required to construct model rockets. The kit provides two different fin designs to allow each student to customize the appearance of the rocket.

    Producing slow, realistic takeoffs, this large model is a perfect small field rocket. It doesn't fly very high and returns on a brightly colored FlisKits parachute.

    The instructions include a detailed section on hints and tips to help beginners learn from the model building experience.

    Thing-a-Ma-Jig Model Rocket Kit

    FlisKits Thing-a-Ma-Jig Model Rocket Kit

    The FlisKits Thing-a-Ma-Jig kit is designed for first-time rocket builders. The kit's laser-cut fins hold themselves together while the glue dries - ensuring perfect alignment.

    G.T.S. 1 (Galatic Training Ship) Model Rocket Kit

    MPC G.T.S. 1 (Galatic Training Ship) Model Rocket Kit

    MPC's GTC 1 can be built and ready to fly in an hour. It features a unique nose design and stellar graphics.

    Looney Tunes Duck Dodgers Cadet Cruiser Model Rocket Kit

    MPC Looney Tunes Duck Dodgers Cadet Cruiser Model Rocket Kit

    The Duck Dodgers Cadet Cruiser is an easy-to-build rocket from MPC featuring Porky Pig of Looney Tunes fame. The kit can be built and ready for launch in less than one hour. It includes a unique parachute design and is compatible with Estes and Quest engines. A self-stick decal sheet and illustrated instructions complete the kit.

    USS Reliant Model Rocket Kit

    MPC USS Reliant Model Rocket Kit

    MPC's USS Reliant rocket is easy to build with a pre-decorated body tube.  The Star Trek themed rocket uses standard engines from Estes and Quest and includes self-stick decals and a special parachute.

    Birdie Model Rocket Kit

    Odd'l Rockets Birdie Model Rocket Kit

    Odd'l Rockets Birdie is an actual flying badminton shuttlecock. Easy to build, this little Birdie serves up a lot of fun! 

    The color of your Birdie may vary.

    Sputnik Model Rocket Kit

    Odd'l Rockets Sputnik Model Rocket Kit

    Odd'l Rockets' version of the classic "Odd-Ball" model rocket features a three-inch foam ball which is pre-drilled for the motor mount, central launch lug, and "antenna" fins. The Sputnik is easy to build and easy to fly!

    America Model Rocket Kit

    Quest Aerospace America Model Rocket Kit

    The Quest America sports a patriotic red, white, and blue theme. Balsa fins, a molded plastic cone, and color-coded parts make this an easy Skill Level One build.

    Big Betty Model Rocket Kit

    Quest Aerospace Big Betty Model Rocket Kit

    Quest's Big Betty is a large, easy-to-build rocket. With balsa fins and a plastic nose cone, the Big Betty "flies like a dream."

    Planet Probe Model Rocket Kit

    Quest Aerospace Planet Probe Model Rocket Kit

    Fun to fly and easy to build, the cone-shaped Planet Probe rocket is perfect for small flying areas.

    The Planet Probe features gentle tumble recovery. No recovery wadding is required, so the Planet Probe is easy and quickly prepared for flight.

    Some tips for building the Planet Probe:

    The shroud is pre-printed on one side, but is plain white on the other. As an alternative to using the pre-printed side, you can flip the shroud over and use the white side. The white side may be decorated, before or after assembly, with paint or markers.

    Gluing the cardstock internal fins to the motor mount tube can be challenging. To make it easier, lightly sand both the root edges of each fin and the places on the motor tube where the fins will be glued. Redraw the lines on the motor tube after sanding. Sanding the surfaces gives a slightly rougher finish which allows the glue to adhere better. Apply a light bead of glue along the line on motor tube. Stick the root edge of the fin to the glue. Pull the fin away and wait a few seconds. Then stick it back in place. Hold the fin in place for a while until it is steady before trying to glue the next fin.

    An alternative way to attach the fins to the motor tube is to use a thin bead of CA ("Super") glue. Be careful when aligning the fin and pressing it into the glue because the glue will grab instantly. Let the glue dry for an hour or two then apply a fillit of white or wood glue along each fin's edge as described in the kit's instructions.

    Totally Tubular Model Rocket Kit

    Quest Aerospace Totally Tubular Model Rocket Kit

    Quest's Totally Tubular utilizes tube fin stabilization. It is very easy to build. All of the tubes are pre-colored and the decals are self-adhesive for easy application. With streamer recovery, this is a great small-field flier.

    Triton-X Model Rocket Kit

    Quest Aerospace Triton-X Model Rocket Kit

    The Quest Triton-X is a large, easy-to-build rocket. The transition and striking decal make this a cool-looking rocket.

    Viper Model Rocket Kit Bulk Pack (12)

    Quest Aerospace Viper Model Rocket Kit Bulk Pack (12)

    This is a bulk package which includes kits to build twelve (12) rockets.

    The Viper model rocket kit has a plastic fin unit which makes it easy to build. Featuring parachute recovery, the Viper is fun to build and even more fun to fly.

    Colors may vary.

    Turbo Vortico Model Rocket Kit

    Rocketarium Turbo Vortico Model Rocket Kit

    The Turbo Vortico is a three-blade, upscale version of Rocketarium's Vortico 'copter-style rocket. Like it's smaller cousin, the Turbo Vortico flies straight up while spinning then helicopters down for a smooth landing. The Turbo Vortico flies on 29mm E to G motors.

    This oddroc kit comes with six (6) pieces of laser-cut plywood, a heavy-wall motor tube, and a 1/4" launch lug. Fully illustrated instructions make assembly a breeze.

    Sprite Model Rocket Kit

    Semroc Sprite Model Rocket Kit

    The Astron Sprite was released in 1964 as a free kit on the mailing cover sheet of the February 1964 Model Rocket News. Designed by Gene Street, Chief Illustrator of Estes Industries, the Astron Sprite usies the same tumble recovery method that was earlier used by the Estes Scout. The Sprite quickly became a classic design and was in production for almost ten years.

    Semroc's Retro-Repro Sprite is updated with laser- cut fins and other minor upgrades, but the model remains close to the original.

    Trident Model Rocket Kit

    Semroc Trident Model Rocket Kit

    Estes released its Trident kit in 1967. Semroc's re-issue of this futuristic classic features laser-cut fins and waterslide decals.



Copyright © 2017 JonRocket.com LLC