Your Shopping Cart is empty

Skill Level = 2

    Kappa-9M (24mm or 3x18mm Cluster) Model Rocket Kit

    Aerospace Speciality Products Kappa-9M (24mm or 3x18mm Cluster) Model Rocket Kit

    The Kappa 9M is a two-stage Japanese sounding rocket. The first Kappa 9M (K-9M-1) was flown on November 12, 1962.

    Impressive on display as well as in the air, this kit features basswood fins, a balsa nose cone, and balsa transition, and decal. This big (over 3 1/2 feet tall) model is a can be built to fly on a cluster of three 18mm motors or a single 24mm motor.

    Micro RP-3 Model Rocket Kit

    Aerospace Speciality Products Micro RP-3 Model Rocket Kit

    The RP-3 was a Polish unguided experimental rocket used for such diverse purposes as wind studies and carrying "Rocket Mail." The RP-3 was first built in 1963 and stood over seven feet tall.

    ASP's scale model of the RP-3 is just under 5" tall and flies on Quest Micro Maxx motors. The kit includes a Kevlar shock cord, metallized polyester streamer, water-slide decals, and complete instructions.

    Micro Sonda II B Model Rocket Kit

    Aerospace Speciality Products Micro Sonda II B Model Rocket Kit

    The Sonda II B is the largest of Brazil's series of Sonda II sounding rockets. The Sonda II was first flown during the early 1970s and continues in use today.

    ASP's scale model of the Sonda II B is just over 5" tall and flies on Quest Micro Maxx motors. The kit includes a Kevlar shock cord, metallized polyester streamer, water-slide decals, and complete instructions.

    Skylark Model Rocket Kit

    Aerospace Speciality Products Skylark Model Rocket Kit

    The Skylark was a British sounding rocket originally designed to be used for experiments during the International Geophysical Year. The first single-stage Skylark (as depicted by this model) flew on February 19, 1957, and reached an altitude of eight miles. Later Skylarks took scientific payloads to altitudes of over 100 miles.

    This scale kit features laser-cut balsa fins, a balsa nose cone, water-slide decals, a quick-change engine hook, and parachute recovery. The ASP Skylark flies great on 13mm mini-motors.

    Super Loki Dart (24mm) Model Rocket Kit

    Aerospace Speciality Products Super Loki Dart (24mm) Model Rocket Kit

    The Super Loki-Dart is one of NASA's workhorses for lofting small payloads. Radar chaff, inflatable spheres, and radiosondes for meteorological data are some of the payloads sent aloft by this vehicle.

    ASP's scale model is both fun and challenging to build. It includes a full decal set. At 3 1/2 feet tall, this is an impressive model that always attracts attention. Rockets built from this kit have placed in both regional and national competitions.

    Tall Boy (24mm) Model Rocket Kit

    Aerospace Speciality Products Tall Boy (24mm) Model Rocket Kit

    ASP's Tall Boy is designed so that you can fly it in one of four configurations. This mean machine's modular design makes it easy to transport. The configuration is easily changed in minutes at the launch site.

    In the Extra Long configuration, the rocket is over 10 feet tall and uses 24mm D and E motors. The Short configurations can be flown using less-expensive 18mm motors using an adapter. (The adapter is not included.)

    This kit features Aerospace Speciality Products' usual top-quality components, outstanding instructions, a balsa wood nose cone, laser-cut balsa fins, and two parachutes.

    That Tube Rocket (29mm) Model Rocket Kit

    Aerospace Speciality Products That Tube Rocket (29mm) Model Rocket Kit

    This larger version of ASP's That Tube Rocket flies on 29mm F and G motors.

    ASP's That Tube Rocket flies without the use of standard fins. Very easy to build, That Tube Rocket includes a quick-change engine hook that makes it easy to fly over and over. Features ASP's usual top-quality components and outstanding instructions.

    Recommended Parachute (not included): 24" to 36" Nylon (regular or thin mil, 30" or 36" is best for most flights)

    Two High (18mm) Model Rocket Kit

    Aerospace Speciality Products Two High (18mm) Model Rocket Kit

    This is an easy to build two-stage kit with laser-cut balsa fins and a balsa wood nose cone. The rocket can be built with either three or four fins per stage. A fun, high flyer, the Two High is a great introduction to staging and is ideal if you are following the NARTREK program.

    V-2 (24mm) Model Rocket Kit

    Aerospace Speciality Products V-2 (24mm) Model Rocket Kit

    ASP's 24mm V-2 is their most popular kit. The kit includes a pre-drilled balsa boattail, a balsa nose cone, and laser-cut basswood fins. Designed primarily to fly on D12 motors, the V2 also flies great on 18mm Bs and Cs with an adapter (not included).

    WAC Corporal (18mm) Model Rocket Kit

    Aerospace Speciality Products WAC Corporal (18mm) Model Rocket Kit

    WAC Corporal (29/38mm) Model Rocket Kit

    Aerospace Speciality Products WAC Corporal (29/38mm) Model Rocket Kit

    The WAC Corporal was the United States first sounding rocket. Seventeen WAC and WAC B rockets were flown from 1945 to 1947. The WAC was launched with the aid of the Tiny Tim solid propellant booster. After the booster burned out, it fell away and the liquid fuel propelled sustainer stage continued its upward flight.

    At 2.6" in diameter and over 3 1/2 feet tall, ASP's 38mm, single-stage version of the ever-popular WAC Corporal will be a welcome addition to your rocket fleet. A custom-turned hard balsa nose cone and boattail, laminated, easily-shaped fins along with a plastic and wood conduit make this a model that looks and flies like a dream. This model has a main 38mm engine mount. An adapter is included to fly 29mm engines.

    A 24" or 30" nylon parachute (not included) is recommended.

    Way Two High (18/24mm) Model Rocket Kit

    Aerospace Speciality Products Way Two High (18/24mm) Model Rocket Kit

    The Way Too High is an easy to build two-stage kit. The booster section can be built in either of two styles. The kit features laser-cut balsa fins, a payload section, and a balsa wood nose cone.

    The Way Too High can be built to use either 18mm or 24mm engines.

    Astron Drifter Model Rocket Kit

    BMS Astron Drifter Model Rocket Kit

    This is a clone kit (parts only) for the Estes Astron Drifter (#K-14). The Astron Drifter first appeared in the 1964 Estes catalog. Estes continued to produce the Drifter through 1979. The rocket was designed to compete in parachute duration events.

    BMS has improved the kit with laser-cut fins. A parachute is not included. 

    Aztec Model Rocket Kit

    Custom Rocket Aztec Model Rocket Kit

    The Aztec is a fun two-stage rocket which flies almost half a mile into the sky. Features an injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, and pressure sensitive decals.

    Elite Model Rocket Kit

    Custom Rocket Elite Model Rocket Kit

    The Custom Rocket Elite is an egg lofter rocket which allows you to launch a raw egg and recover it without breaking. Easy to build and fly, the kit features a blow molded plastic nose cone, laser cut stand-offs for launch lugs, laser-cut balsa fins, a parachute and pressure sensitive decals.

    Equinox Model Rocket Kit

    Custom Rocket Equinox Model Rocket Kit

    Estes no longer produces the extra-tall Mean Machine rocket kit. So, if you want big, consider the Custom Rocket Equinox.

    The Equinox is a six-foot tall monster! When you launch the Equinox, it slowly lifts off the pad just like a real rocket. The kit includes a large pressure-sensitive decal, two parachutes, a blow-molded nose cone, and a quick-release engine mount.

    Galaxy Model Rocket Kit

    Custom Rocket Galaxy Model Rocket Kit

    The Galaxy is a two-stage kit featuring a blow-molded nose cone, die-cut balsa fins, large pressure-sensitive decals, and an 18" parachute. Excellent flights to 1000 feet.

    Liberty Model Rocket Kit

    Custom Rocket Liberty Model Rocket Kit

    If you like the Custom Rocket Freedom kit then you'll want this kit.  Liberty is a big sport rocket with large decals. The kit features a blow-molded plastic nose cone, die-cut balsa fins, 18" parachute recovery, pressure-sensitive decals, and a quick-release engine mount. Flights of over 750 feet are possible with a D12-5 motor.

    M320 Model Rocket Kit

    Custom Rocket M320 Model Rocket Kit

    The M320 is a scale-like missile. The kit features an injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, pressure-sensitive decals, and quick-release engine mount.

    Scavenger Model Rocket Kit

    Custom Rocket Scavenger Model Rocket Kit

    The Custom Scavenger is a D-powered rocket with big decals. Easy to build and fly, it makes a great demonstration flyer. The kit features a blow-molded plastic nose cone, die-cut balsa fins, 18" parachute recovery, pressure sensitive decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a D12-5 motor.

    Solar Explorer Model Rocket Kit

    Custom Rocket Solar Explorer Model Rocket Kit

    The Solar Explorer is a deep space probe searching for habitable planets. The kit features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, unique self-adhesive decals, and a quick-release engine mount. Flights to 700 feet.

    Juno II Model Rocket Kit

    Dr. Zooch Juno II Model Rocket Kit

    Perhaps the most un-glamorized booster ever produced by von Braun’s team at Army Ballistic Missile Agency (ABMA) was the Juno II. Only ten of these vehicles were launched in a two and one half year period and only four of those flights were able to be called successful.

    By the end of 1958 the von Braun team, on behalf of the newly created NASA, assembled and launched the first Juno II from Pad 5 at Cape Canaveral. NASA was itching to go from space planning to space flying and the Juno II, although developed by the ABMA, would give the public appearance of being a NASA vehicle and NASA project. The first launch of a Juno II, on December 6, 1958, lofted the Pioneer III probe. Thereafter, the vehicle’s track record gets fairly dismal with only three of the next nine flights officially considered successful. In the end the Juno II was simply a vehicle that was quickly passed by as spaceflight technology experienced an explosive growth.

    The Juno II now holds the record as being NASA’s least successful launch vehicle. So, if you get more than four fully successful flights out of your Juno II, you’ll be doing better with your Juno II than either NASA or ABMA did with theirs!

     

    Air Commander Model Rocket Kit

    Estes Air Commander Model Rocket Kit

    Estes introduces another great two-stage rocket. The Air Commander is powered by C11 and D Engines to amazing heights! The Air Commander is a sleek two-stage sport rocket which stands over 30 inches tall. The Air Commander flies on standard engines and can be flown single stage or two-stage.

    Astron Sprint XL Model Rocket Kit

    Estes Astron Sprint XL Model Rocket Kit

    For more than three decades, Mike Dorffler designed rockets and other products for Estes. To honor Dorffler’s legacy, Estes has produced a larger version of one of Mike’s classic rockets. The Skill Level 2 Astron XL flies on 24mm C, D, and E motors.

    Big Daddy Model Rocket Kit

    Estes Big Daddy Model Rocket Kit

    The Big Daddy is a modern classic. This beefy rocket flies on 24mm C, D, and E motors.

    Blenders Model Rocket Kit

    Estes Blenders Model Rocket Kit

    The Estes Blenders rocket kit includes the parts to build two mini-engine powered saucers.

    CC Express Model Rocket Kit

    Estes CC Express Model Rocket Kit

    The Estes CC Epress is multi-staging at its best. The CC Express has blistering performance and great looks. It features a one-piece body tube, molded plastic nose cone, and laser-cut wood fins for easy assembly. The self-stick decals will make this high altitude specialist a real stand out at any launch site. The CC Express is a must have for any rocket enthusiast looking for ultimate, high flying excitement!

    Centuri Model Rocket Kit

    Estes Centuri Model Rocket Kit

    A tribute to yesterday's rockets, the Estes Centuri features laser-cut wood fins and a 12" parachute.

    Dark Energy Model Rocket Kit

    Estes Dark Energy Model Rocket Kit

    One of a kind, the Dark Energy is unlike any rocket before. It features an awesome five-fin design and the waterslide decals and paint give it a sweet futuristic look.

    Eggscaliber Model Rocket Kit

    Estes Eggscaliber Model Rocket Kit

    The Estes Eggscaliber has a special clear payload section which holds an egg. With the included engine adapter, it can fly on B/C or D/E motors. Bacon not included.

    Recommended Motors (with egg): B6-2, C6-3, C11-3, D12-3, E9-4
    Recommended Motors (no egg): B4-2, B6-2, C6-5, D12-5, E9-6

    EPM-010 Model Rocket Kit

    Estes EPM-010 Model Rocket Kit

    The EPM-010 features swept forward fins with outer navigational pods for interplanetary space travel. Its long slender design will reward you with straight, out-of-site flights. This hot-looking rocket floats back to earth on a pre-assembled 12 inch parachute. Standard Engine powered, the EPM-010 soars to over 900 feet.

    Hi-Flier XL Model Rocket Kit

    Estes Hi-Flier XL Model Rocket Kit

    The Hi-Flier XL is an upsized replica of the #1 selling Estes Hi-Flier! Powered by C11, D and E engines, this sporty rocket can reach amazing heights.

    JBR-013 Model Rocket Kit

    Estes JBR-013 Model Rocket Kit

    Estes's JBR-013 features laser-cut wood fins which you assemble. The JBR-013 flies on standard engines and can reach heights of 775 feet.

    Laser Lance Model Rocket Kit

    Estes Laser Lance Model Rocket Kit

    The Laser Lance stands over 20 inches tall and can reach heights of 925 feet. A military-style model, it's sure to be a crowd pleaser!

    Mean Machine Model Rocket Kit (OOP)

    Estes Mean Machine Model Rocket Kit (OOP)

    The Estes Mean Machine is a staggering 6 1/2 feet tall. It provides slow majestic flights.

    The Mean Machine comes with an adapter that allows it to be launched with either with D or E engines. Estes has updated this classic with a connector that allows the rocket to be broken down into two sections for easier transportation and storage.

    This product is now out-of-production.

    Mini Comanche 3 Model Rocket Kit

    Estes Mini Comanche 3 Model Rocket Kit

    The Mini Comanche 3 is a smaller version of the popular three-stage Comanche 3 rocket. This version flies on mini-engines and can be flown as a single-stage, a two-stage, or a three-stage rocket.

    Nemesis Model Rocket Kit

    Estes Nemesis Model Rocket Kit

    Estes introduced the Nemesis in their 2001 catalog. It features a futuristic spaceship design with a cockpit molded into the nosecone.

    Produced from about 2001 to 2004, this kit is still in the original packaging.

    Nike Smoke Model Rocket Kit

    Estes Nike Smoke Model Rocket Kit

    The Estes Nike Smoke is a 1/10th scale flying model of the Nasa sounding rocket developed in the 1960s to explore the behavior of horizontal winds in the upper atmosphere.

    Nike-X Model Rocket Kit

    Estes Nike-X Model Rocket Kit

    The Estes Nike-X single-stage rocket is a scale-like model of the US Army's fourth-generation, two-stage surface-to-air interceptor missile. This kit features a Nike-style design with Army details including high-quality, realistic roll-pattern waterslide decals.

    Photon Disruptor Model Rocket Kit

    Estes Photon Disruptor Model Rocket Kit

    The Estes Photon Disruptor kits is a "Classic Series" re-issue of the "21st century Star Fleet missile" which was originally released in 1991.

    Quinstar Model Rocket Kit

    Estes Quinstar Model Rocket Kit

    The Estes Qunstar flying model rocket is assembled from precision-cut wood pieces. The helicopter-recovery saucer spins on the way up as well as during recovery.

    Sky Warrior Model Rocket Kit

    Estes Sky Warrior Model Rocket Kit

    The Estes Sky Warrior takes off to over 800 feet on a C6-5 motor. With three unique fins and parachute recovery, the Sky Warrior is a worthy addition to your rocketry fleet.

    Solar Warrior Model Rocket Kit

    Estes Solar Warrior Model Rocket Kit

    A sleek sport rocket standing 27 inches tall, the Solar Warrior is screaming to be added to your collection. This rocket can heights over 900 feet.

    The Solar Warrior flies on C11 and D and engines and a bright 18-inch parachute brings it back to earth. Be the first in your neighborhood to get this hot rocket!

    STM 012 Model Rocket Kit

    Estes STM 012 Model Rocket Kit

    The STM 012 is a sporty, 24mm-powered bird. It features a slotted body tube and waterslide decals.

    Super Neon Model Rocket Kit

    Estes Super Neon Model Rocket Kit

    The Estes Super Neon features special "tubular flight stabilizers" which will make this rocket a favorite to build and fly. Watch the Super Neon model rocket soar to heights of almost 1000 feet using standard Estes motors.

    Super Nova Model Rocket Kit

    Estes Super Nova Model Rocket Kit

    The Estes Super Nova is a two-stage payload rocket. Feauring a clear payload section and parachute recovery, the Super Nova kit includes laser-cut wood fins.

    Twin Factor Model Rocket Kit

    Estes Twin Factor Model Rocket Kit

    Using economical mini-engines, the Twin Factor can be flown as a single-stage or as a two-stage rocket. This saucer-inspired kit features laser-cut cardstock and waterslide decals.

    Vagabond Model Rocket Kit

    Estes Vagabond Model Rocket Kit

    Standing almost three feet tall, the Estes Vagabond can reach heights of 1275 feet. Launched on D and E engines, this rocket is sure to be a crowd-pleaser.

    Alien 8 Model Rocket Kit

    FlisKits Alien 8 Model Rocket Kit

    Douglas Shrock, better known as Shrox, designed the Alien 8 for FlisKits. The futuristic, and definitely alien, Alien 8 kit includes silk-screened waterslide decals, balsawood nose cones, laser-cut light plywood round fins, a Kevlar enhanced recovery system and a fin jig to help in attaching fins.

    Avalear Model Rocket Kit

    FlisKits Avalear Model Rocket Kit

    Rated by FlisKits as a "Skill Level 1.5" build, the Avalear is a perfect second or third rocket kit to build.

    Jim Flis designed the kit to to introduce skills needed to construct more difficult kits such as cutting fins. The Avalear comes with a sheet of balsa fin stock and patterns for the two different shape fins (six fins in all). The fin shapes are simple in design making cutting with a straight edge quite easy. Additionally, the kit includes a BT-19 dummy motor tube that is glued to a Fin Alignment Template to make aligning the fins a breeze. The end result is a fairly easy build, a sharp looking rocket and new skills that you can apply to your next model rocket kit.

    Cheetah Model Rocket Kit

    FlisKits Cheetah Model Rocket Kit

    Named for the fastest land animal, the Cheetah is a sleek, two-stage rocket.

    Decaffeinator Model Rocket Kit

    FlisKits Decaffeinator Model Rocket Kit

    The Decaffeinator is a first in the world of model rocketry. Not that this is the first foam cup rocket ever made. But it IS the first foam cup rocket KIT ever made! 

    Foam cup rockets seem to be a product of the minds of rocketeers in the North East USA but their actual origins are not known. First seen by Jim Flis at a Pearl River MODroc conference, Jim has explored these beasts for many years trying new and different designs every time. They are fun to build and always get attention at the launch field.

     

    Doubles Model Rocket Kit

    FlisKits Doubles Model Rocket Kit

    FlisKit's Doubles is a two-stage kit which flies on Quest Micromaxx motors. The booster requires a Micromaxx-NE (No Ejection) model rocket motor. The Doubles model rocket is a BT-3 based, two-stage model that goes higher than you would EVER expect a micro model to go. This kit features water slide decals, to help dress it up, but does not include laser-cut parts. The fins are cut, from templates, using the provided balsa sheet.

    Frick-n-Frack Model Rocket Kit

    FlisKits Frick-n-Frack Model Rocket Kit

    The Frick-n-Frack is a two-stage saucer.  You'll surprise everyone at your launch when the Frick-n-Frack stages at 40 or 50 feet in the air, dropping the lower stage and half of her stabilizing plates a the sustainer continues on its way.

    Featuring low, slow flights, the F-n-F is perfect for small fields and demonstration flights.  Your audience and actually witness the staging event as it occurs close to the ground even with the largest motors.  You don't have to worry about loosing either part because they are large and the rocket does not fly very high.

    The F-n-F features six large sheets of precision laser-cut parts including assembly jigs and highly-detailed instructions. In spite of all the parts, the Frick-n-Frack is an easy build.

    Be sure, however, to launch your Frick-n-Frack in very low winds. Saucer rockets have a tendency to weather-cock (turn into the wind) a great deal and multi-stage saucers are even MORE prone to do this.  Always launch your Frick-n-Frack in dead calm and always pointed STRAIGHT up.

    Praetor Model Rocket Kit

    FlisKits Praetor Model Rocket Kit

    The Praetor's most distinctive feature is its large fins. With the distinctive fins and slow, majestic lift-offs, this rocket is a crowd pleaser.

    The Praetor also has a very important and unique history. The Praetor was the anniversary kit, designed by Jim Flis and presented to attendees of the 1990 Pearl River Model Rocketry Convention in Pearl River, NY, founded and hosted by teacher Dick Nelson.

    The Praetor also has a small payload section suitable for a variety of payloads. A colorful 16" parachute returns your model gently, flight after flight. A fine addition to any model rocket fleet, the Praetor will provide many hours of enjoyment, both building and launching!

    Special Piercing Armament Device (S.P.A.D.) Model Rocket Kit

    FlisKits Special Piercing Armament Device (S.P.A.D.) Model Rocket Kit

    FlisKits 13th anniversary commemorative kit features laser cut parts, water slide decals, and a sinister look.

    Trifecta Model Rocket Kit

    FlisKits Trifecta Model Rocket Kit

    FlisKit's Trifecta is a three-stage rocket featuring laser-cut fins and a fin alignment jig for easy assembly. The Trifecta flies on Estes's mini engines which means that it does not go very high. You will be able to see each staging event as the rocket ascends to about 150 feet. And, you'll be able to easily recover all three stages.

    The Trifecta is an excellent introduction to multi-stage rockets and it makes a great rocket for demonstration flights.

    V2-WAC Bumper Model Rocket Kit

    FlisKits V2-WAC Bumper Model Rocket Kit

    Powered by MicroMaxx motors, the FlisKits V2-WAC Bumper is a micro-scale model of the V2 coupled with a WAC Corporal missile as tested during the "Bumper" project.


    This kit features 3D printed parts.

    Break Away Model Rocket Kit

    Odd'l Rockets Break Away Model Rocket Kit

    Odd'l Rockets' Break Away features "break-apart" recovery. At apogee, the rocket breaks into several sections which wiggle their way back to earth. A Kevlar tether holds the pieces together making recovery safe and easy. Just slide the segments back together and you are ready for another flight.

    Odd'l Rockets has improved upon the original Break Away by using longer coupler connections and engineering better, easier-to-construct segment ties.
    Cyclone Model Rocket Kit

    Odd'l Rockets Cyclone Model Rocket Kit

    Based on research and a design by Jonathan Wayne Mills, Ph.D, the Odd'l Rocket's Cyclone features amazing two-part helicopter recovery.  While the bottom section helicopters to earth, the top section spins down like a Mapleseed.

    Courier Model Rocket Kit

    Quest Aerospace Courier Model Rocket Kit

    We can't think of many other ways that you can send an egg sailing 400 ft into the air and return it safely (and in time for breakfast!) The specially designed nose capsule comes unpadded - requiring your students to experiment with various methods of protecting Mr. Egg. The Courier model rocket is a traditional balsa fin design and carries it's own dual parachute recovery.

    Flies with Quest B6-2, B6-4 and C6-3 rocket motors. Can also use Estes B6-2, B6-4 and C6-5 rocket motors.

    Gamma Ray Model Rocket Kit

    Quest Aerospace Gamma Ray Model Rocket Kit

    The Gamma Ray features a red transparent payload section.

    Superbird Model Rocket Kit

    Quest Aerospace Superbird Model Rocket Kit

    The Quest Super Bird Model Rocket is the perfect vehicle for long, slow and impressive flights. With an 800 ft. maximum altitude and dual parachutes the Super Bird model rocket is as interesting to watch coming down as going up!

    Cerberus Model Rocket Kit

    Rocketarium Cerberus Model Rocket Kit

    Rocketarium's Cerberus provides a good introduction to the fun and excitement of clustering. Featuring a stylish split-fin design, the Cerberus flies on a cluster of three A to C motors. The Cerberus stands nearly three feet tall and includes large self-adhesive decals and parachute kit for recovery.

    The included decals show the Cerberus logo. The three bands below the nose cone were painted. No engine hooks are provided with this kit, as there's no room for them. The motors are friction-fit.

    Gadfly Missile Model Rocket Kit

    Rocketarium Gadfly Missile Model Rocket Kit

    Rocketarium's Gadfly is a scale model of the Soviet SA-11 radar-guided surface-to-air missile introduced in the 1980s.

    The Gadfly military scale rocket kit flies on a cluster of three 18mm rocket engines. The large forward fins are created by gluing two shorter fin sections together. The fin sections and fins themselves are pre-cut.

    KSR-420S Scale Model Rocket Kit

    Rocketarium KSR-420S Scale Model Rocket Kit

    The KSR-420S Sounding Rocket is a Korean sounding rocket once used to gather data on ozone concentration over the Korean peninsula. The KSR-420S also carried a highly-specialized device to measure micro gravity. In somewhat less peaceful times, the KSR-420S could be modified to carry a 200kg destructive payload over a considerable distance.

    This sport-scale model of the KSR-420S flies on a cluster of three 18mm model rocket motors As a Skill Level 2 kit, the KSR-420S is easy to build. This makes it a great choice for rocketeers new to clustering.

    Little John Model Rocket Kit

    Rocketarium Little John Model Rocket Kit

    The US Army developed the Little John to deliver nuclear (and conventional) payloads.

    The Rocketarium sport-scale kit includes decals and decal placement instructions the black bands on the airframe. This is an easy-to-build, skill level 2 model rocket kit.

    The Little John kit is easy to build. If you can cut fins from balsa stock, you can build and enjoy this model rocket. Fin template is included.

    Maxtermind Model Rocket Kit

    Rocketarium Maxtermind Model Rocket Kit

    The Maxtermind is Rocketarium's signature rocket. This sleek mid-power rocket flies on D to F motors.

    The split-fin design gives the Maxtermind character and makes it fun to build. The kit includes large self-adhesive decals, laser-cut centering rings, balsa fin shock, parachute kit for recovery, and other parts needed to build it.

    SS-520 Cluster Model Rocket Kit

    Rocketarium SS-520 Cluster Model Rocket Kit

    Rocketarium's SS-520 Cluster Rocket is a single-staged, sport-scale model of a Japanese sounding rocket. The real SS-520 is a two-stage rocket, the kit is single stage.

    The real SS-520 rockets can reach altitudes of 800 km to conduct scientific experiments and gather data. This flying model rocket doesn't go quite as high. It does, however, fly on a cluster of two 18mm motors for added fun and excitement.

    The kit's self-adhesive decal sheet includes fin wraps, lettering, and body wraps. The nose cone and antennae area (right below the nose cones) need to be painted.

    Vortico Odd-Roc Model Rocket Kit

    Rocketarium Vortico Odd-Roc Model Rocket Kit

    Looking for something different? Give this oddroc a whirl! The Vortico shoots straight up into the sky and starts spinning. That motion results in helicoptering on the way down for a smooth landing. This oddroc consists of seven pre-cut plywood pieces, motor tube, and launch lug. The clearly illustrationed instructions make the Vortico rocket easy to assemble. The Vortico doesn't land far from where it took off. This is a great rocket for a launch site with a small recovery area.

    This rocket should not be flown on windy days. Use a short (1 foot) launch rod

    Blue Jay Model Rocket Kit

    Semroc Blue Jay Model Rocket Kit

    Semroc's Blue Jay kit is an easy-to-build boost glider. After apogee, the booster returns under a streamer while the glider flies back to earth.

    Point Model Rocket Kit

    Semroc Point Model Rocket Kit

    The Amazing Point is Semroc's re-issue of the classic Centuri kit from 1969. Centuri designed the Point to show that a model rocket did not have to look like a rocket to fly. Basically a cone shape, it demonstrated principles of stability and showed that the rocket could be used as its own parachute. The Semroc Point is a faithful recreation of the original. It uses a precision shaped balsa nose cone. Laser-cut balsa fins are included instead of the original blank sheet with a fin pattern sheet. The canopy is now self-adhesive and a high gloss full color shroud is provided so there is very little left to paint. An elastic cord is provided instead of the original rubber shock cord.

    Red Eye Model Rocket Kit

    Semroc Red Eye Model Rocket Kit

    The Red-Eye kit was originally released in 1980 by Centuri Engineering Company as the enemy satellite for their new Satellite Killer. Both of these models were a part of their “War in Space” series. Since these were done in the final days of Centuri, as a separate company from Estes Industries, there were no later entries. The Red-Eye was an “upscale” of the earlier Satellite 62SL and used the same fiber fin sheets. It was released as Catalog Number 5346 and had an introductory price of $2.00.

    The Semroc Retro-Repro Red-Eye is updated with laser-cut fins. The original plastic nose cone is replaced with balsa. The engine mount is added to work with a wide range of mini-engines instead of a standard 1/2A6 engine.

    Starship Vega Model Rocket Kit

    Semroc Starship Vega Model Rocket Kit

    Semroc brings back another classic from the past with the Starship Vega flying model rocket kit. Sporting a futuristic design, the Starship Vega made its first appearance in the 1973 Estes catalog.

    NSL 2015 Commemorative Sky Wolf Rocket Kit

    SkyPyrates Rocketry NSL 2015 Commemorative Sky Wolf Rocket Kit

    The split-fin Sky Wolf is a high-performance, mid-power rocket.  Sleek and strong, with a 29mm motor mount, the Sky Wolf flies on D through H motors.

    The Sky Wolf kit features pre-cut plywood fins, heavy-duty body tubes, a Kevlar shock cord, a nylon parachute, and a vinyl decal.

    Produced to commemorate the 2015 National Sport Launch, this is a limited edition kit.



Copyright © 2017 JonRocket.com LLC