Your Shopping Cart is empty

Recommended Motors = 1/2A6-2

    Kappa-7-1 (18mm) Model Rocket Kit

    Aerospace Speciality Products Kappa-7-1 (18mm) Model Rocket Kit

    The Kappa-7 was designed as a booster for Japan's later Kappa-8 and Kappa-9 rockets as well as being used as a single-stage sounding rocket. It was determined, however, that the vehicle was unsuitable as a single-stage rocket. The lone Kappa-7 flight was made on November 18, 1959 to confirm the motor's suitability as a booster. 

    ASP's model of one of Japan's early sounding rockets makes a great beginner's kit. Capable of flying on a wide range of engines, this great looking and great flying model can be flown on practically any size field.

    Neo Standard Model Rocket Kit

    Aerospace Speciality Products Neo Standard Model Rocket Kit

    ASP's Neo Standard is a great beginner's kit. Easy to build and fly, the Neo Standard is ideal for use in school and other group settings. Designed with the beginner in mind, the Neo Standard is also a fun sport flier for modelers of any experience level.

    Features laser-cut balsa fins, balsa nose cone, quick-change engine hook, and parachute recovery. The Neo Standard flies on standard 18mm engines.

    Sonda II B (18mm) Model Rocket Kit

    Aerospace Speciality Products Sonda II B (18mm) Model Rocket Kit

    The Sonda II B is the largest of Brazil's series of Sonda II sounding rockets. The Sonda II was first flown during the early 1970s and continues in use today. 

    Ease of construction and painting makes ASP's model of the Brazilian sounding rocket a great first scale kit.

    Theta 18 Model Rocket Kit

    Aerospace Speciality Products Theta 18 Model Rocket Kit

    ASP's Theta 18 is an easy-to-build kit for beginners and a great sport flier for modelers of any experience level. With laser-cut balsa fins, a balsa nose cone, and streamer recovery, the Theta 18 flies on standard 18mm engines.

    Atomic Model Rocket Kit

    Custom Rocket Atomic Model Rocket Kit

    The Atomic is a six-finned rocket with fifties retro styling. It features an injection-molded plastic nose cone, die-cut balsa fins, parachute recovery, pressure-sensitive decals, and a quick-release engine mount for fast engine changes. Flights of over 1000 feet are possible with a C6-7 motor.

    Aztec Model Rocket Kit

    Custom Rocket Aztec Model Rocket Kit

    The Aztec is a fun two-stage rocket which flies almost half a mile into the sky. Features an injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, and pressure sensitive decals.

    Freestyle Model Rocket Kit

    Custom Rocket Freestyle Model Rocket Kit

    Colorful graphics set the Custom Rocket Freestyle kit apart from the rest. The kit includes an injection-molded nose cone, quick-release engine mount, laser-cut balsa fins, a 12" parachute and self-adhesive decals. Flights to 750 feet.

    Galaxy Patrol Model Rocket Kit

    Custom Rocket Galaxy Patrol Model Rocket Kit

    Keeping our universe safe since 2080. Features injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, quick-release engine mount, and detailed pressure-sensitive decals.

    Galaxy Rescue Model Rocket Kit

    Custom Rocket Galaxy Rescue Model Rocket Kit

    First on the scene of any emergency. Features injection-molded plastic nose cone, laser-cut balsa fins, and streamer recovery. Impressive self-adhesive decals and quick-release engine mount. Super high flier can reach altitudes over 1,000 feet.

    Galaxy Taxi Model Rocket Kit

    Custom Rocket Galaxy Taxi Model Rocket Kit

    Space taxi! Small details make this an excellent display model for your collection. Features injection-molded plastic nose cone, quick-release engine mount, laser-cut balsa fins, streamer recovery, and large pressure-sensitive decal.

    Game Over Model Rocket Kit

    Custom Rocket Game Over Model Rocket Kit

    Flashback to the early 80s with Custom's Game Over flying model rocket kit. The 8-bit graphics on the decals remind us of the decade of video games and MC Hammer pants. This kit features an injection nose cone, laser-cut fins, streamer recovery, pressure-sensitive decals, and a quick-release engine mount. Flights over 1000 feet are possible.

    Redliner Model Rocket Kit

    Custom Rocket Redliner Model Rocket Kit

    The Redliner is a sleek, long design. Easy to build and fly, it makes a great beginner kit. The kit featues an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute, precision printed water-slide decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.

    Zero Gravity Model Rocket Kit

    Custom Rocket Zero Gravity Model Rocket Kit

    The Zero Gravity is a low-priced, easy to assemble kit. It features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute, pressure-sensitive decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.


    The Zero Gravity kit may be bulk packaged in a plain, clear plastic bag rather than retail packaged.

    Alpha III Launch Set

    Estes Alpha III Launch Set

    The Estes Alpha III Launch set includes the classic, easy-to-build Alpha III model rocket kit, a launch pad, and a controller.

    Alpha VI Model Rocket Kit

    Estes Alpha VI Model Rocket Kit

    The Alpha VI is a special limited-edition of the classic Alpha series of rockets. Commemorating the 60th anniversary of Estes, this kit features colorful self-stick decals.

    Black Brant III Model Rocket Kit

    Estes Black Brant III Model Rocket Kit

    Estes's Black Brant III is a flying scale model of the primary research vehicle produced by Canada Bristol Aerospace and is an excellent choice for your first scale project. Construction is fairly simple with high-quality parts including laser-cut wood fins, waterslide decals, and a 12 inch parachute for recovery. Great performance and really impressive flights!

    Hi-Flier Model Rocket Kit

    Estes Hi-Flier Model Rocket Kit

    The Estes Hi-Flier is one of the most extreme, super performance model rockets you can own. The Hi-Flier can easily be built in one afternoon. The Estes Hi-Flier isis capable to flights over 1,600 feet and recovers with a fluorescent orange streamer.

    Viking Model Rocket Bulk Pack (12 Kits)

    Estes Viking Model Rocket Bulk Pack (12 Kits)

    The Estes Viking can be easily assembled with 48 possible different fin configurations. The kit\'s five special, die-cut card stock fins allow you to create a rocket that\'s truly unique. Take your pick on how you want your rocket to look; fins up, fins down or fins whatever way. You call it, it\'s your day to be the rocket designer.

    Customize your own rocket...no matter how you place the fins, it still offers the ultimate in high performance model rocket flight. This Skill Level 1 rocket kit includes a single-piece body tube, molded nose cone, and self-stick decals.

    The Viking is just over 12 inches tall. When flown on standard engines, the Viking is able to reach amazing launch heights over 1600 feet and land safely with its bright orange streamer.

    The versatile Viking can be built in an afternoon and is a great rocket for beginners, class projects, clubs and rocket demonstrations.

    Wizard Model Rocket Kit

    Estes Wizard Model Rocket Kit

    The Estes Wizard is an easy-to-assemble, Skill Level 1 kit with a one-piece body tube, laser-cut wood fins, and a bullet-shaped plastic nose cone. The self-stick decals are sure to make this mystic rocket the envy of everyone at your local launch field. The Wizard is a great rocket for beginners, schools, clubs and rocket demonstrations.

    Avalear Model Rocket Kit

    FlisKits Avalear Model Rocket Kit

    Rated by FlisKits as a "Skill Level 1.5" build, the Avalear is a perfect second or third rocket kit to build.

    Jim Flis designed the kit to to introduce skills needed to construct more difficult kits such as cutting fins. The Avalear comes with a sheet of balsa fin stock and patterns for the two different shape fins (six fins in all). The fin shapes are simple in design making cutting with a straight edge quite easy. Additionally, the kit includes a BT-19 dummy motor tube that is glued to a Fin Alignment Template to make aligning the fins a breeze. The end result is a fairly easy build, a sharp looking rocket and new skills that you can apply to your next model rocket kit.

    Rose-A-Roc Model Rocket Kit

    FlisKits Rose-A-Roc Model Rocket Kit

    The Rose-a-Roc kit is based on Art Rose's competition helicopter duration design.

    Boosting on a wide variety of motors, the Rose-A-Roc leaps into the air, gaining surprising altitude. At apogee, the ejection charge burns away a hold-down string that releases three large, impressive, helicopter blades. Designed for a self-induced spin, she hangs in the air for a moment then begins to drop. Suddenly, the blades begin to spin and pick up speed! Riding a cushion of air as she descends, the Rose-A-Roc floats gently to the ground.

    FlisKits has, with Art's permission, re-engineered the Rose-A-Roc for a simpler and more precise build. But, it remains a high-end competition model.

    The Rose-a-Roc features a precision three-part, laser-cut hub that makes assembling the rotor hub a snap. The kit includes a custom-turned pre-drilled nose cone tailored for the Rose-a-Roc and precision laser-cut centering rings to hold the rotor shaft firmly for many flights. A unique method of attaching the launch lug allows the rocket to be flown without exotic launch equipment such as towers and pistons.

    Golden Scout Model Rocket Kit

    Semroc Golden Scout Model Rocket Kit

    Vernon Estes designed the Scout in 1959. The tumble-recovery Scout was first introduced as a kit (#K-1) in 1961.

    Hawk Model Rocket Kit

    Semroc Hawk Model Rocket Kit

    The Hawk model rocket boost glider is based on a hand-launched balsa glider. It was originally marketed by Advanced Model Rocket Systems (AMROCS) in their 1965 catalog.

    The Semroc version of the Hawk kit includes laser-cut balsa fins and a balsa nose cone. Pre-printed lines on the balsa sheet make assembly easy.



Copyright © 2018 JonRocket.com LLC