This scale-like model rocket kit is easy-to-assemble with no painting required.
This educator bulk pack contains 12 Alpha III kits. The Alpha III is one of the most reliable, easiest to build rockets. It features a dynamic look - a gloss black body tube with a fluorescent orange plastic fin unit and nose cone. The Alpha III requires no painting.
The Estes Alpha has introduced many millions to model rocketry since its introduction more than 35 years ago. Easy-to-build, the Alpha looks great and flies great.
The Alpha is a classic Skill Level 1 kit. It includes a one-piece body tube, laser-cut wood fins, and an aerodynamic nose cone.
Building the Alpha takes about an afternoon. When powered with a C engine, the rocket can reach altitudes of 1,000 feet. Recovery is accomplished with a colorful 12-inch preassembled parachute.
The Baby Bertha is a pint-sized version of the classic Big Bertha. At just under 13 inches, the Baby Bertha is about half the size of it's larger cousin. The Baby Bertha kit features laser-cut fins, a plastic nose cone, self-stick decals, and a colorful 12-inch pre-assembled parachute.
The Big Bertha is a classic Estes kit. Designed by Vern Estes himself, this is one of the largest Skill Level 1 rockets. it is a great beginenr's rocket. The Big Bertha is terrific for demonstractions as its large size and steady flights on smaller motors provide slow, realistic lift-offs.
A tribute to yesterday's rockets, the Estes Centuri features laser-cut wood fins and a 12" parachute.
With gold chrome fins and nose cone, the Estes Chrome Domes Gold model rocket kit is sure to put a sparkle in your eye. A prismatic body tube completes the jewel-like appearance of this easy-to-build rocket kit.
This sleek design from Estes features quality body tubes, a large balsa nose cone, laser-cut balsa fins, and easy-to-apply waterslide decals.
Prioviously only available in a launch set, the Estes Crossfire ISX is, perhaps, the coolest looking beginner's kit in Estes's catalog. With laser-cut wood fins and bright, self-stick decals, the Crossfire ISX flies on standard-size motors and is recovered by parachute.
A couple of hours of your time and you're off to the flying field with the really cool Dark Zero from Estes! This kit is easy to build and all the parts are pre-colored so there's no need to bother with paint.
The EPM-010 features swept forward fins with outer navigational pods for interplanetary space travel. Its long slender design will reward you with straight, out-of-site flights. This hot-looking rocket floats back to earth on a pre-assembled 12 inch parachute. Standard Engine powered, the EPM-010 soars to over 900 feet.
With a multi-fin design resembling a surface-to-air missile, the Guardian is a Skill Level 2 rocket with parachute recovery.
The Estes Hi-Flier is one of the most extreme, super performance model rockets you can own. The Hi-Flier can easily be built in one afternoon. The Estes Hi-Flier isis capable to flights over 1,600 feet and recovers with a fluorescent orange streamer.
Estes's JBR-013 features laser-cut wood fins which you assemble. The JBR-013 flies on standard engines and can reach heights of 775 feet.
The Estes Loadstar II is a great rocket with great performance. This two-stage rocket includes a large payload section.
Looking for your first two-stage rocket? Consider the Estes Mongoose. Plastic one-piece fin units make assembly quick and easy.
This fun No. 2 Skywriter rocket looks like a wooden pencil. The Skywriter includes colored body tubes, fins, and nose cone, so assembly is quick and easy.
This one-tenth scale model of the Army's M-104 Patriot air defense missile features authentic decals and parachute recovery.
Estes produced the Pegasus kit from about 1993 through 1995. The quickly-bulit rocket requires no painting.
This is an out-of-production kit.
Based on the classic Centuri Phoenix Bird kit from the late 1970s, the new Estes Phoenix Bird features through-the-wall fins and self-stick foil decals.
The Estes Photon Disruptor kits is a "Classic Series" re-issue of the "21st century Star Fleet missile" which was originally released in 1991.
The Estes Photon Probe is a "Classic Series" re-issue of a futuristic kit which was originally released in 1991.
The easy-to-assemble Estes Reflector has a large payload section, laser-cut fins, and waterslide decals.
Estes produced the Reliant from about 1993 to 1997. It's a nice-looking Skill Level 1 rocket with die-cut fins.
This kit is out of production and supplies are limited.
The ultra-cool Estes Screaming Eagle looks great sitting in the hanger, but screams to be out soaring with the other eagles. Let this bird out of his cage and experience the thrill of flying with a stealthy hunter. The Screaming Eagle soars to nearly 600 feet using standard model rocket engines. After each flight, the Screaming Eagle lands softly under a bright 12-inch preassembled parachute, making for an enjoyable afternoon of bird watching.
This superbly-detailed rocket has awesome markings that will be the envy of all rocketeers. Great to fly or to display, the Estes Screaming Eagle features laser-cut balsa fins and waterslide decals.
The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.
The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.
After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!
The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.
The Estes Sky Cruiser is an easy-to-assemble model rocket kit featuring a plastic fin unit and self-stick decals.
The Estes Space Eagle is simple to build and exciting to fly. Standing over 26 inches (66 cm) tall, the Space Eagle is sure to be a crowd pleaser.
Estes produced the Space Racer kit from about 1991 to 1996. This out-of-production kit is a small, easy-to-build rocket with a plastic nose cone.
The Estes Super Neon features special "tubular flight stabilizers" which will make this rocket a favorite to build and fly. Watch the Super Neon model rocket soar to heights of almost 1000 feet using standard Estes motors.
The Estes Viking rocket offers 48 possible fin configurations and flies on standard model rocket engines. The Viking is a good kit for the beginner.