Your Shopping Cart is empty

Recommended Motors = C6-3

    Black Brant IV Model Rocket Kit

    Aerospace Speciality Products Black Brant IV Model Rocket Kit

    The Black Brant IV is a Canadian sounding rocket designed to launch payloads to over 500 miles high. First flown in 1964, the two-stage rocket was used into the 1980's. Over fifty flew from launch sites all over the world, including Peru, Spain, Norway, Greenland, and the U.S. among others.

    ASP's single-stage scale kit is nearly three feet tall and features a balsa transition and hard balsa nose cone, laser-cut basswood fins, water-slide and self-adhesive decals, and a quick-change engine hook. You can fly this model on a wide range of engines, with fairly low altitudes on a C, but practically out-of-sight flights on an E! Designed primarily for 24mm C, D & E engines, it can also be flown on selected 18mm engines with an adapter (not included). A bright metallic parachute returns it to the ground for flight after flight.

    Coporal (24mm) Model Rocket Kit

    Aerospace Speciality Products Coporal (24mm) Model Rocket Kit

    The Corporal was the first guided missile put into use by the U. S. Army. Originally designed as a test vehicle to study the problems associated with long range rockets, the Corporal was later turned into a tactical battlefield missile capable of carrying either a conventional or nuclear warhead. The first test vehicle was flown in 1947. Full production vehicles made their appearance in the summer of 1952. The basic design saw some modifications until the Corporal was retired in 1964.

    ASP's model features a balsa nose cone and balsa conduits, basswood fins, and decals. Designed to fly on 24mm C, D, and E motors, this single-stage rocket can also fly on select 18mm using an adapter (not included).

     With the the included decals, no masking is required when painting this impressive model.

    S.L.V. Model Rocket Kit

    Custom Rocket S.L.V. Model Rocket Kit

    The SLV ("Satellite Launch Vehicle) provides slow, impressivelift-offs that look so real. The kit features an injection-molded plastic nose cone, six die-cut balsa fins, a 12" parachute, and self-adhesive decals. Flights of over 750 feet.

    SpaceX Falcon Heavy Improved Model Rocket Kit

    Dr. Zooch SpaceX Falcon Heavy Improved Model Rocket Kit

    Dr. Zooch's scale flying model of the SpaceX Falcon 9 Heavy includes Dr. Zooch's "flame fins" to ensure stable flights on C6-3 motors.

    Asteroid Hunter Model Rocket Kit

    Estes Asteroid Hunter Model Rocket Kit

    The Estes Asteroid Hunter has a unique sci-fi design that will blow you away. This kit is a challenge to construct but will reward you with its out-of-this-world exotic appearance.

    Astron Sky Dart II Model Rocket Kit

    Estes Astron Sky Dart II Model Rocket Kit

    Powered by standard engines, expect to be impressed with the glider flight of the Astron Skydart II. Absolutely the coolest glider rocket Estes makes, one minute duration glides are fully possible. Be the first on your block to get this cool rocket.

    Chiller Model Rocket Kit

    Estes Chiller Model Rocket Kit

    The Estes Chiller is an "Almost Ready to Fly" model rocket. Its shiny chrome nose cone makes it easy to track on a sunny day. Assembly is so simple, slip the fin into the fin slots then attach the recovery system. Add the BT-55 Booster Accessory (sold separately) for two-stage flights.

    Cosmic Cobra Model Rocket Kit

    Estes Cosmic Cobra Model Rocket Kit

    You'll be amazed when the rocket returns to earth with a parachute while the nose cone helicopters down.

    The Cosmic Cobra streaks to altitudes over 500 feet high. Two recovery devices are used to tame this reptile. The main rocket, with upswept fins, returns to earth on a colorful 12 inch parachute while the sleek nose cone helicopters down on bright colored, retractable rotor blades. Assembly of the Cobra takes about one hour or less, making it a great choice for any beginner! You'll draw a crowd at the flying field when you blast this unique rocket into space!

    Dark Energy Model Rocket Kit

    Estes Dark Energy Model Rocket Kit

    One of a kind, the Dark Energy is unlike any rocket before. It features an awesome five-fin design and the waterslide decals and paint give it a sweet futuristic look.

    Eggscaliber Model Rocket Kit

    Estes Eggscaliber Model Rocket Kit

    The Estes Eggscaliber has a special clear payload section which holds an egg. With the included engine adapter, it can fly on B/C or D/E motors. Bacon not included.

    Recommended Motors (with egg): B6-2, C6-3, C11-3, D12-3, E9-4
    Recommended Motors (no egg): B4-2, B6-2, C6-5, D12-5, E9-6

    Firestorm Model Rocket Kit

    Estes Firestorm Model Rocket Kit

    The Estes Firestorm is an "Almost Ready-to-Fly" (ARTF) model rocket featuring uniquely colored plastic fins and nose cone. Just slip the fins into the fin can and the rocket is ready to prep for flight.

    Add the BT-60 Booster accessory (sold separately) to fly the Firestorm as a two-stage rocket.

    Flying Colors Model Rocket Kit

    Estes Flying Colors Model Rocket Kit

    Este's Flying Colors model rocket sports a fun color scheme. It's almost fully assembled when you get it.  Just slip the fins into the fin can, and it's ready to prep for launch. Add the BT-60 Booster accessory (sold separately) to convert the Flying Colors to a multi-stage rocket.

    Fractured Model Rocket Kit

    Estes Fractured Model Rocket Kit

    Easily assembled and ready for flight quickly, the Fractured doesn't require any painting. It flies up to 550 feet on a C6-3 or C6-5 engine. Add the Booster-60 accessory (sold separately) for two-stage flights.

    Helicat Launch Set

    Estes Helicat Launch Set

    In just a few minutes you will have this rocket ready for the launch pad. The Estes HeliCAT features a unique helicopter nose cone recovery that is a blast to watch land.

    You will need glue and plastic cement, but assembly of the HeliCAT is easy and no painting is necessary. Powered by standard Estes engines, this quickly built rocket reaches heights of over 500 feet.

    This is a launch set which includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. Batteries, rocket motors, and other launch supplies are not included.

    Helios Model Rocket Kit

    Estes Helios Model Rocket Kit

    The Estes Helios is an almost-ready-to-fly rocket featuring a bright silver body tube and yellow fins and nose cone. Slide the fins into the fin can and the rocket is ready to prep for flight.

    The BT-60 Booster accessory (sold separately) converts the Helios into a two-stage rocket.

    Mix-n-Match 50 Model Rocket Kit

    Estes Mix-n-Match 50 Model Rocket Kit

    The Mix-n-Match 50 set includes parts to build three colorful rockets. All parts are pre-colored, so no painting is required. Two sheets of self-stick decals are included.

    The Mix-n-Match 50 includes BT-50 (0.976 inch diameter) parts:

    • Three nose cones and nose cone inserts
    • Six pre-colored BT-50 (.98 in diameter) body tubes
    • Three body tube connecters
    • Three fin can units
    • Twelve fins in three different styles
    • Three launch lugs and clear reinforcements
    • Three shock cords
    • Three pre-assembled parachutes
    • Two self-stick decal sheets
    Mix-n-Match 55 Model Rocket Kit

    Estes Mix-n-Match 55 Model Rocket Kit

    The Mix-n-Match 55 set contains enough parts to build three colorful rockets. Pre-colored parts and two huge self-stick decal sheets mean that you won't need paint to finish your creations.

    Includes:

    • Three nose cones and nose cone inserts
    • Six pre-colored BT-55 (1.33 in diameter) body tubes
    • Three body tube connecters
    • Three fin can units
    • Twelve fins in three different styles
    • Three launch lugs and clear reinforcements
    • Three shock cords
    • Three pre-assembled parachutes
    • Two self-stick decal sheets
    Mix-n-Match 60 Model Rocket Kit

    Estes Mix-n-Match 60 Model Rocket Kit

    The Mix-n-Match 60 set includes parts that you can use to create three colorful rockets. Express your creativity by combining the parts your way.

    All of the parts are pre-colored, so no painting is required. Two sheets of self-stick decals are included.

    The Mix-n-Match 60 includes BT-60 parts:

    • Three nose cones and nose cone inserts
    • Six pre-colored BT-60 (1.64 inch diameter) body tubes
    • Three body tube connecters
    • Three fin can units
    • Twelve fins in three different styles
    • Three launch lugs and clear reinforcements
    • Three shock cords
    • Three pre-assembled parachutes
    • Two self-stick decal sheets
    Red Rider Model Rocket Kit

    Estes Red Rider Model Rocket Kit

    Red Rider is another of Este's new almost-ready-to-fly rockets. Assembly consists of little more than sliding the fins into the fin can. The Red Rider is a single-stage rocket, but you can add the BT-55 Booster accessory (sold separately) to convert it to a two-stage rocket.

    Rookie Model Rocket Kit

    Estes Rookie Model Rocket Kit

    There is nothing "rookie" about the Estes Rookie rocket. Quick to assembe and a high flier, the Rookie is powered by standard engines and can reach heights over 500 feet. And if you want to go really high, add the BT-60 Booster Accessory (sold separately) and a D12-0 booster engine then watch this rocket soar.

    Shuttle Xpress Model Rocket Kit

    Estes Shuttle Xpress Model Rocket Kit

    The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.

    The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.

    After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!

    The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.

    Sky Twister Model Rocket Kit

    Estes Sky Twister Model Rocket Kit

    The easy-to-assemble Sky Twister features a nose cone with helicopter recovery. The nose cone deploys rotor blades and spins back to earth while the rest of the rocket returns under a parachute.

    Spectra Model Rocket Kit

    Estes Spectra Model Rocket Kit

    Assembling the Spectra is as simple as sliding the fins into the fin can. This almost-ready-to-fly rocket will reach altitudes of 550 feet on a C motor.  Add the BT-60 Booster Accessory (sold separately) and watch the Spectra soar way past 1250 feet as a two-stage rocket.

    Starbase Starcruiser Model Rocket Kit (OOP)

    Estes Starbase Starcruiser Model Rocket Kit (OOP)

    The Starbase Starcruiser was produced by Estes in 1995 specifically for the US Department of Defense's STARBASE youth program.

    STARBASE is an educational program, sponsored by the Office of the Assistant Secretary of Defense for Reserve Affairs. STARBASE students participate in challenging "hands-on, mind-on" activities in Science, Technology, Engineering, and Math.

    This kit is still in the original, plain plastic bag, packaging. It features a plastic fin set and a large, self-stick decal sheet.

    Starship Nova Model Rocket Kit

    Estes Starship Nova Model Rocket Kit

    Another return of a classic. The Estes Starship Nova is back!

    Xarconian Cruiser Model Rocket Kit

    Estes Xarconian Cruiser Model Rocket Kit

    The next generation in planetary defense is the Xarconian Cruiser. It is capable of both planetary and space flight. The cruiser's Hyper-Plasma engine pods serve as booth propulsion and offensive weaponry.

    Estes's flying model of this future interplanetary spaceship contains many details that a craftsman modeler will enjoy. This Skill Level 5 rocket flies over 500 feet and returns safely to earth under an 18-inch parachute.

    Future Launch Vehicle Model Rocket Kit

    Quest Aerospace Future Launch Vehicle Model Rocket Kit

    Quest Aerospace's Future Launch Vehicle is a scale-like model rocket kit which captures the spirit of NASA's upcoming series of new manned rockets.

    Gamma Ray Model Rocket Kit

    Quest Aerospace Gamma Ray Model Rocket Kit

    The Gamma Ray features a red transparent payload section.

    Harpoon AGM Model Rocket Kit

    Quest Aerospace Harpoon AGM Model Rocket Kit

    Quest's Harpoon model rocket kit is accurately detailed to match the US Navy and Air Force SLAM AGM-84 Harpoon anti-ship missile. The Harpoon model rocket can reach an altitude of 800 feet.

    Striker AGM Model Rocket Kit

    Quest Aerospace Striker AGM Model Rocket Kit

    Quest Aerospace's Striker AGM is an impressive scale-like missile which stands over 27 inches tall. The kit features a unique molded boat-tail and plastic nose cone. The laser-cut balsa fins make assembly easy and there's a big water-slide decal sheet providing lots of visual details.

    Triton-X Model Rocket Kit

    Quest Aerospace Triton-X Model Rocket Kit

    The Quest Triton-X is a large, easy-to-build rocket. The transition and striking decal make this a cool-looking rocket.

    Retro Rebel Model Rocket Kit

    Rocketarium Retro Rebel Model Rocket Kit

    Rocketarium has utilized a computer-controlled production process to create the intricate pieces that assemble to produce one of the most unique flying model rocket kits you'll ever see. The Rebel Rebel rocket kit includes twenty-two pre-cut plywood pieces. It uses a parachute for recovery and includes a Kevlar and elastic shock cord.

    Vortico Odd-Roc Model Rocket Kit

    Rocketarium Vortico Odd-Roc Model Rocket Kit

    Looking for something different? Give this oddroc a whirl! The Vortico shoots straight up into the sky and starts spinning. That motion results in helicoptering on the way down for a smooth landing. This oddroc consists of seven pre-cut plywood pieces, motor tube, and launch lug. The clearly illustrationed instructions make the Vortico rocket easy to assemble. The Vortico doesn't land far from where it took off. This is a great rocket for a launch site with a small recovery area.

    This rocket should not be flown on windy days. Use a short (1 foot) launch rod

    Blue Jay Model Rocket Kit

    Semroc Blue Jay Model Rocket Kit

    Semroc's Blue Jay kit is an easy-to-build boost glider. After apogee, the booster returns under a streamer while the glider flies back to earth.

    Mars Lander Model Rocket Kit

    Semroc Mars Lander Model Rocket Kit

    Semroc's Mars Lander is based on the classic Estes kit which was produced from 1969 to 1983.

    Although a challenge to build, you'll be pleased with the result. Semroc's parts and instructions are of the highest quality.

    Orion Model Rocket Kit

    Semroc Orion Model Rocket Kit

    Featuring a balsa nose cone, laser-cut fins, and an internal baffle system, Semroc's Orion flying model rocket kit is a modern update of the classic Centuri kit of the 1970s.

    Satellite Killer Model Rocket Kit

    Semroc Satellite Killer Model Rocket Kit

    The Satellite Killer model rocket kit was released in 1980 by Centuri Engineering Company along with the Red-Eye as its enemy satellite. Inspired by the cold war "Star Wars" proposal, these models were a part of Centuri's "War in Space" series. Since these were done in the final days of Centuri as a separate company from Estes Industries, there were no later entries.

    The Semroc Retro-Repro Satellite Killer kit is updated with laser-cut fiber fins. The original foil decals are changed to waterslide for ease of use and durability. A Kevlar cord is added for a more reliable shock mount. Most of the rest of the model is faithful to the original design.



Copyright © 2018 JonRocket.com LLC