This scale-like model rocket kit is easy-to-assemble with no painting required.
The Green Alien model rocket kit is almost ready to fly. This crayon-themed rocket stands almost 20" tall and features a twist-on fin section when also acts as a motor retainer.
This Skill Level 2 kit from Estes is another bring-back of a classic. The Alien Invader kit includes a high-quality plastic nose cone, laser-cut wood fins and waterslide decals which mimic the original kit.
This educator bulk pack contains 12 Alpha III kits. The Alpha III is one of the most reliable, easiest to build rockets. It features a dynamic look - a gloss black body tube with a fluorescent orange plastic fin unit and nose cone. The Alpha III requires no painting.
The Estes Alpha has introduced many millions to model rocketry since its introduction more than 35 years ago. Easy-to-build, the Alpha looks great and flies great.
The Alpha is a classic Skill Level 1 kit. It includes a one-piece body tube, laser-cut wood fins, and an aerodynamic nose cone.
Building the Alpha takes about an afternoon. When powered with a C engine, the rocket can reach altitudes of 1,000 feet. Recovery is accomplished with a colorful 12-inch preassembled parachute.
One of Estes's series of "ready-to-fly" crayon rockets, the Atomic Aqua flies to more than 500 feet on a C motor.
The Baby Bertha is a pint-sized version of the classic Big Bertha. At just under 13 inches, the Baby Bertha is about half the size of it's larger cousin. The Baby Bertha kit features laser-cut fins, a plastic nose cone, self-stick decals, and a colorful 12-inch pre-assembled parachute.
The Big Bertha is a classic Estes kit. Designed by Vern Estes himself, this is one of the largest Skill Level 1 rockets. it is a great beginenr's rocket. The Big Bertha is terrific for demonstractions as its large size and steady flights on smaller motors provide slow, realistic lift-offs.
Blast off with the Estes Blast Off Blue flying model rocket. This kit comes pretty much ready to fly and soars to more than 500 feet on a C motor.
A tribute to yesterday's rockets, the Estes Centuri features laser-cut wood fins and a 12" parachute.
With gold chrome fins and nose cone, the Estes Chrome Domes Gold model rocket kit is sure to put a sparkle in your eye. A prismatic body tube completes the jewel-like appearance of this easy-to-build rocket kit.
The Estes Chuter 2 features dual parachutes which bring this classic rocket back to Earth in style after blasting off to heights of up to 900 feet. The unique fin design and colorful body of the Chuter-Two make it a great rocket for anyone.
Estes has gone back to the archives and pulled up old drawings and spec sheets to bring back this vintage design. The kit has been reproduced and updated while retaining the classic lines of the original. The Chuter-Two kit contains high-quality body tubes, a balsa nose cone, and laser-cut balsa fins.
The new Estes Cobra is a menacing, futuristic fighter. Standing 18" tall, the Cobra has an 8" wing span.
This kit includes laser-cut wood fins and waterslide decals.
You'll be amazed when the rocket returns to earth with a parachute while the nose cone helicopters down.
The Cosmic Cobra streaks to altitudes over 500 feet high. Two recovery devices are used to tame this reptile. The main rocket, with upswept fins, returns to earth on a colorful 12 inch parachute while the sleek nose cone helicopters down on bright colored, retractable rotor blades. Assembly of the Cobra takes about one hour or less, making it a great choice for any beginner! You'll draw a crowd at the flying field when you blast this unique rocket into space!
This sleek design from Estes features quality body tubes, a large balsa nose cone, laser-cut balsa fins, and easy-to-apply waterslide decals.
A smaller cousin of the classic Satellite Interceptor kit, the Crossbow SST can reach a height of 1600 feet on a C6-5.
Prioviously only available in a launch set, the Estes Crossfire ISX is, perhaps, the coolest looking beginner's kit in Estes's catalog. With laser-cut wood fins and bright, self-stick decals, the Crossfire ISX flies on standard-size motors and is recovered by parachute.
A couple of hours of your time and you're off to the flying field with the really cool Dark Zero from Estes! This kit is easy to build and all the parts are pre-colored so there's no need to bother with paint.
Der Red Max is a re-issue of the classic kit which first appeared in Estes's 1971 catalog. The rocket is a little more than 16 inches tall. It includes waterslide decals, laser-cut balsa fins, and a pre-assembled 18" parachute.
The EPM-010 features swept forward fins with outer navigational pods for interplanetary space travel. Its long slender design will reward you with straight, out-of-site flights. This hot-looking rocket floats back to earth on a pre-assembled 12 inch parachute. Standard Engine powered, the EPM-010 soars to over 900 feet.
Simple to build, the Equinox needs about an evening of your time, white or yellow glue, and paint. Standing just 15 inches (38.1 cm) tall, this jewel can soar up to 1,575 (480 m) feet!
This one is simple to build yet impressive in looks! The Equinox is sure to get noticed at the flying field.
The Estes Flip Flyer is an easy-to-assemble kit featuring parachute and helicopter recovery. The nose of the rocket returns to earth under a parachute while the body deploys rotors and returns like a helicopter.
The Freefall is easy to assemble and includes a parachute man with his own parachute for recovery. Standard engine powered, the Freefall can reach 575 feet.
The Estes Fusion X-25 is a cool Skill Level 1 rocket with a unique fin design. A show stopper, the Fusion X-25 was designed with the new rocketeer in mind. The Fusion X-25 is simple to build yet impressive on the launch pad. Launched on standard Estes motors, this rocket can reach heights over 1100 feet.
With a multi-fin design resembling a surface-to-air missile, the Guardian is a Skill Level 2 rocket with parachute recovery.
The Estes Hi-Flier is one of the most extreme, super performance model rockets you can own. The Hi-Flier can easily be built in one afternoon. The Estes Hi-Flier isis capable to flights over 1,600 feet and recovers with a fluorescent orange streamer.
The Interceptor is another re-release of a classic Estes kit from the 1970s. Estes, however, has upgraded this kit with improved parts making it easier to build than ever.
This kit is out-of-production and supplies are limited.
Estes's JBR-013 features laser-cut wood fins which you assemble. The JBR-013 flies on standard engines and can reach heights of 775 feet.
The Estes Loadstar II is a great rocket with great performance. This two-stage rocket includes a large payload section.
Standing 22-inches tall, the Monarch is a big and bold beginner's rocket. The Monarch features laser-cut balsa fins and waterslide decals.
The Estes Nike Smoke is a 1/10th scale flying model of the Nasa sounding rocket developed in the 1960s to explore the behavior of horizontal winds in the upper atmosphere.
This fun No. 2 Skywriter rocket looks like a wooden pencil. The Skywriter includes colored body tubes, fins, and nose cone, so assembly is quick and easy.
This one-tenth scale model of the Army's M-104 Patriot air defense missile features authentic decals and parachute recovery.
The Payloader II was a popular kit marketed by Centuri from about 1965 to 1981. Estes has re-issued and updated this classic kit.
Estes produced the Pegasus kit from about 1993 through 1995. The quickly-bulit rocket requires no painting.
This is an out-of-production kit.
Based on the classic Centuri Phoenix Bird kit from the late 1970s, the new Estes Phoenix Bird features through-the-wall fins and self-stick foil decals.
The Estes Photon Disruptor kits is a "Classic Series" re-issue of the "21st century Star Fleet missile" which was originally released in 1991.
The Estes Photon Probe is a "Classic Series" re-issue of a futuristic kit which was originally released in 1991.
One-eyed, one-horned flying purple ... oops ... wrong flying purple thing! This is the flying purple crayon rocket from Estes. It arrives assembled and pretty much ready to fly.
The Estes Purple Planet Crayon flies up to 500 feet on a standard C motor.
The Estes Plasma Probe captures the futuristic design of Centuri kits from the 1970s.
This ready-to-fly rocket incudes a twist-on fin unit which also holds the motor in place for flight. This crayon-themed rocket stands 20" tall.
The easy-to-assemble Estes Reflector has a large payload section, laser-cut fins, and waterslide decals.
Estes produced the Reliant from about 1993 to 1997. It's a nice-looking Skill Level 1 rocket with die-cut fins.
This kit is out of production and supplies are limited.
This Skill Level 1 rocket is part of Estes's "Basic Builder Series."It is simple to build and paint, but features distinctive Air-to-Air missile styling. The Ricochet flies up to 1125 feet on a C motor.
Rocket Red is a RTF crayon-themed rocket. It stands almost 20" tall and features a twist-on fin section.
Estes's Satellite Silver rocket is styled like a flying crayon. Just insert an engine, twist on the fin unit, attach the shock cord to the nose cone, and you are ready for launch.
A couple of minutes of your time and you are on the flying field ready to blast off. Standing almost 20 inches tall, this rocket goes well over 500 feet.
The Estes Savage is an easy-to-build two-stage rocket. It provides an excellent introduction to multi-stage rocketry.
The ultra-cool Estes Screaming Eagle looks great sitting in the hanger, but screams to be out soaring with the other eagles. Let this bird out of his cage and experience the thrill of flying with a stealthy hunter. The Screaming Eagle soars to nearly 600 feet using standard model rocket engines. After each flight, the Screaming Eagle lands softly under a bright 12-inch preassembled parachute, making for an enjoyable afternoon of bird watching.
This superbly-detailed rocket has awesome markings that will be the envy of all rocketeers. Great to fly or to display, the Estes Screaming Eagle features laser-cut balsa fins and waterslide decals.
Standing almost 3 feet tall, the Etses Shattered features a clear body tube in the middle of the rocket and a colorful parachute for recovery. Powered by standard engines, this easy-to-assemble rocket won't take long to build so you will have more time for fun.
The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.
The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.
After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!
The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.
The Estes Sky Cruiser is an easy-to-assemble model rocket kit featuring a plastic fin unit and self-stick decals.
The easy-to-assemble Sky Twister features a nose cone with helicopter recovery. The nose cone deploys rotor blades and spins back to earth while the rest of the rocket returns under a parachute.
The Estes Sky Warrior takes off to over 800 feet on a C6-5 motor. With three unique fins and parachute recovery, the Sky Warrior is a worthy addition to your rocketry fleet.
The Estes Space Eagle is simple to build and exciting to fly. Standing over 26 inches (66 cm) tall, the Space Eagle is sure to be a crowd pleaser.
Estes produced the Space Racer kit from about 1991 to 1996. This out-of-production kit is a small, easy-to-build rocket with a plastic nose cone.
The Star Stryker is a striking, but easy to build, rocket from Estes.
The Starbase Starcruiser was produced by Estes in 1995 specifically for the US Department of Defense's STARBASE youth program.
STARBASE is an educational program, sponsored by the Office of the Assistant Secretary of Defense for Reserve Affairs. STARBASE students participate in challenging "hands-on, mind-on" activities in Science, Technology, Engineering, and Math.
This kit is still in the original, plain plastic bag, packaging. It features a plastic fin set and a large, self-stick decal sheet.
A Skill Level 1 kit, the Stratocruiser looks massive but is an easy builder. Use the really cool color scheme shown or create your own! Either way, the waterslide decals included add a nice finishing touch to your rocket.
Launched on standard Estes Engines, this rocket can reach heights of 725 feet. A preassembled parachute makes for a soft landing. Repack the parachute, grab a new engine and you're ready for another launch!
The Estes Super Neon features special "tubular flight stabilizers" which will make this rocket a favorite to build and fly. Watch the Super Neon model rocket soar to heights of almost 1000 feet using standard Estes motors.
Standing over two feet tall, the Estes Vector Force is a simple to build and finish rocket. The kit features high-quality laser-cut balsa fins, waterslide decals, and easy-to-follow instructions.
The Estes Viking rocket offers 48 possible fin configurations and flies on standard model rocket engines. The Viking is a good kit for the beginner.