Your Shopping Cart is empty

Recommended Motors = E9-6

    Black Brant IV Model Rocket Kit

    Aerospace Speciality Products Black Brant IV Model Rocket Kit

    The Black Brant IV is a Canadian sounding rocket designed to launch payloads to over 500 miles high. First flown in 1964, the two-stage rocket was used into the 1980's. Over fifty flew from launch sites all over the world, including Peru, Spain, Norway, Greenland, and the U.S. among others.

    ASP's single-stage scale kit is nearly three feet tall and features a balsa transition and hard balsa nose cone, laser-cut basswood fins, water-slide and self-adhesive decals, and a quick-change engine hook. You can fly this model on a wide range of engines, with fairly low altitudes on a C, but practically out-of-sight flights on an E! Designed primarily for 24mm C, D & E engines, it can also be flown on selected 18mm engines with an adapter (not included). A bright metallic parachute returns it to the ground for flight after flight.

    Coporal (24mm) Model Rocket Kit

    Aerospace Speciality Products Coporal (24mm) Model Rocket Kit

    The Corporal was the first guided missile put into use by the U. S. Army. Originally designed as a test vehicle to study the problems associated with long range rockets, the Corporal was later turned into a tactical battlefield missile capable of carrying either a conventional or nuclear warhead. The first test vehicle was flown in 1947. Full production vehicles made their appearance in the summer of 1952. The basic design saw some modifications until the Corporal was retired in 1964.

    ASP's model features a balsa nose cone and balsa conduits, basswood fins, and decals. Designed to fly on 24mm C, D, and E motors, this single-stage rocket can also fly on select 18mm using an adapter (not included).

     With the the included decals, no masking is required when painting this impressive model.

    Kappa-9M (24mm or 3x18mm Cluster) Model Rocket Kit

    Aerospace Speciality Products Kappa-9M (24mm or 3x18mm Cluster) Model Rocket Kit

    The Kappa 9M is a two-stage Japanese sounding rocket. The first Kappa 9M (K-9M-1) was flown on November 12, 1962.

    Impressive on display as well as in the air, this kit features basswood fins, a balsa nose cone, and balsa transition, and decal. This big (over 3 1/2 feet tall) model is a can be built to fly on a cluster of three 18mm motors or a single 24mm motor.

    RP-3 (24mm) Model Rocket Kit

    Aerospace Speciality Products RP-3 (24mm) Model Rocket Kit

    The RP-3 was an unguided experimental Polish rocket. Earlier versions of the RP series were used for diverse purposes such as wind studies and carrying "Rocket Mail." The RP-3 was first built in 1963 and stood over seven feet tall.

    ASP's scale model is 22" tall. This unique-looking kit is a sturdy model for D and E powered flights, yet it is still light enough to fly on selected 18mm engines with a motor adapter (not included). The kit includes laser-cut ply fins, balsa nose cone, and decal. Many who own this kit count it among their favorites.

    Super Loki Dart (24mm) Model Rocket Kit

    Aerospace Speciality Products Super Loki Dart (24mm) Model Rocket Kit

    The Super Loki-Dart is one of NASA's workhorses for lofting small payloads. Radar chaff, inflatable spheres, and radiosondes for meteorological data are some of the payloads sent aloft by this vehicle.

    ASP's scale model is both fun and challenging to build. It includes a full decal set. At 3 1/2 feet tall, this is an impressive model that always attracts attention. Rockets built from this kit have placed in both regional and national competitions.

    Astron Sprint XL Model Rocket Kit

    Estes Astron Sprint XL Model Rocket Kit

    For more than three decades, Mike Dorffler designed rockets and other products for Estes. To honor Dorffler’s legacy, Estes has produced a larger version of one of Mike’s classic rockets. The Skill Level 2 Astron XL flies on 24mm C, D, and E motors.

    Big Daddy Model Rocket Kit

    Estes Big Daddy Model Rocket Kit

    The Big Daddy is a modern classic. This beefy rocket flies on 24mm C, D, and E motors.

    D-Region Tomahawk Model Rocket Kit

    Estes D-Region Tomahawk Model Rocket Kit

    The Estes D-Region Tomahawk is a 1/5 scale flying model of NASA's sounding rocket. Launched only one time in 1968, this rocket was designed to take measurements of the D-layer of the ionosphere - thus its name. Estes's version of this fantastic scale rocket captures all the detail of the original in an easy to assemble model that flies as good as it looks.

    In terms of performance, this gigantic rocket can blast nearly 800 feet high when powered with an E engine. An adapter is included to launch on Estes D engines. Finally, to protect this beautiful scale model when it lands, a 24-inch pre-assembled nylon parachute is included.

    Eliminator Model Rocket Kit

    Estes Eliminator Model Rocket Kit

    The Estes Eliminator is a super high performance model rocket design intended for high altitude, cloud punching flying on our powerful E engines! The rocket is almost 31 inches tall and features purple wrapped body tubes and a one piece molded fin set that can handle all the power an E can deliver. A bright yellow nose cone sits atop the rocket while the tribal looking self-stick decals add to its visibility...which you're going to need as the E engine pushes this beast up to 1,400 feet.

    Assembly of this high performance hot rod takes about an hour. When completed you'll be ready for the flight pad for some serious high altitude, blistering fast model rocket flying. Recovery is accomplished using a colorful 12 inch, preassembled parachute for soft landings. Includes an adapter that allows you to quickly convert from E to D engine power.

    Eliminator XL Launch Set

    Estes Eliminator XL Launch Set

    The Estes Eliminator XL rocket stands 44 inches tall. Assembly is easy, just twist the sections together. The Eliminator XL is ready to launch in just a few minutes.

    This set includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. A 3/16-inch Maxi Launch Rod is also included.

    Engines, batteries, and other supplies are not included.

    Hi-Flier XL Model Rocket Kit

    Estes Hi-Flier XL Model Rocket Kit

    The Hi-Flier XL is an upsized replica of the #1 selling Estes Hi-Flier! Powered by C11, D and E engines, this sporty rocket can reach amazing heights.

    Honest John Model Rocket Kit

    Estes Honest John Model Rocket Kit

    Estes's 1/14th scale Honest John flies on an E motor to an altitude of about 1400 feet then returns to earth via parachute.

    QCC Explorer Model Rocket Kit

    Estes QCC Explorer Model Rocket Kit

    Don't let the looks fool you with this Skill Level 4 kit. It may look like it's simple to build, but what's under the paint will surprise you! Each simulated air intake/fin assembly is constructed from 12 interlocking laser cut balsa pieces.

    Super Neon XL Model Rocket Kit

    Estes Super Neon XL Model Rocket Kit

    The Estes Super Neon XL is a large, impressive rocket. It's space-age multi-tube fin design provides superior flight stability and a one-of-a-kind look. The Super Neon XL is a gigantic, more-powerful upscaled version of the Estes Super Neon.

    The Super Neon XL features laser cut wood parts, a high-quality wood nose cone, neon waterslide decals, and top quality Estes body tubes. These features combine to guarantee outstanding flight performance. Towering over most rockets at 37 inches, the XL lifts off on powerful Estes D and E engines. It returns smoothly to earth under a vivid 24-inch parachute.

    V-2 Semi-Scale Model Rocket Kit

    Estes V-2 Semi-Scale Model Rocket Kit

    Powered by C11, D12 and E9 engines, the Estes V2 kit is a flying scale model of the Aggregat-4 ballistic missile developed by the Germans during World War II. After the war, the US used the V-2 as a research rocket to kick-start its rocket development program.

    Vagabond Model Rocket Kit

    Estes Vagabond Model Rocket Kit

    Standing almost three feet tall, the Estes Vagabond can reach heights of 1275 feet. Launched on D and E engines, this rocket is sure to be a crowd-pleaser.

    Mini Batray Model Rocket Kit

    Madcow Rocketry Mini Batray Model Rocket Kit

    Laser-cut "bat" fins give the Madcow Mini Batray its distinctive look. This slightly smaller cousin of the Batray kit includes a fiberglass nose cone, pre-slotted body tube, nylon parachute, a parachute protector, and a 29mm motor mount.

    Mini DX3 Model Rocket Kit

    Madcow Rocketry Mini DX3 Model Rocket Kit

    With a 29mm motor mount, the Madcow Mini DX flies on a wide range of motors from D through G impulse. This kit features a fiberglass nose cone, heavy-duty airframe, flameproof 'chute protector, nylon parachute, and laser-cut fins.

    Mini Frenzy Rocket Kit

    Madcow Rocketry Mini Frenzy Rocket Kit

    Madcow's Mini Frenzy kit features a plastic nose cone, flameproof chute protector, laser-cut plywood parts, Kevlar/Nylon shock cord, 29mm motor mount, and a heavy-duty pre-slotted body tube.

    Big Dog Model Rocket Kit

    Quest Aerospace Big Dog Model Rocket Kit

    The Big Dog stands over 32 inches tall. The kit features a blow-molded plastic nose cone, laser-cut balsa fins, and a rugged 29mm diameter motor mount. Flights with an Aerotech F32-6W will go to almost 3,000 feet. The Big Dogreturns to earth under a large 18" fabric parachute.

    The kit includes big, easy-to-apply self-adhesive decals. It also includes an engine adapter that allows you to use 24mm engines.

    Aerobee 150 Model Rocket Kit

    Semroc Aerobee 150 Model Rocket Kit

    Semroc's Aerobee 150 is a semi-scale kit of the unguided suborbital American Sounding rocket produced by Aerojet General in the 1950s.

    Aerobee 300 Model Rocket Kit

    Semroc Aerobee 300 Model Rocket Kit

    Semroc's Aerobee 300 is a semi-scale kit of the unguided suborbital American Sounding rocket produced by Aerojet General in the 1950s.

    Hammerhead Model Rocket Kit

    U.S. Rockets Hammerhead Model Rocket Kit

    The U.S. Rockets Hammerhead flies on conventional 24mm motors and 18mm motors with an adapter (not included). The kit features tubes which are almost twice as thick as conventional model rocket body tubes. Other features include a plastic nose cone and pre-cut plywood fins.



Copyright © 2018 JonRocket.com LLC