Your Shopping Cart is empty

Style = Futuristic/Exotic

    Astron Explorer Model Rocket Kit

    Estes Astron Explorer Model Rocket Kit

    Standing more than 42" tall when assembled, this Skill Level 4 kit includes waterslide decals and plastic nose cones.

    Conquest Model Rocket Kit

    Estes Conquest Model Rocket Kit

    The time and experience you put into building the Estes Conquest will be rewarded when you see this futuristic rocket blast form the launch pad on a D or E motor.

    Cosmic Interceptor Model Rocket Kit

    Estes Cosmic Interceptor Model Rocket Kit

    The Cosmic Interceptor is an awesome D and E powered rocket. Standing 40.5 inches tall, this is one impressive rocket on the launch pad and in the air! Sharpen your building skills before tackling this one.

    Dark Energy Model Rocket Kit

    Estes Dark Energy Model Rocket Kit

    One of a kind, the Dark Energy is unlike any rocket before. It features an awesome five-fin design and the waterslide decals and paint give it a sweet futuristic look.

    EPM-010 Model Rocket Kit

    Estes EPM-010 Model Rocket Kit

    The EPM-010 features swept forward fins with outer navigational pods for interplanetary space travel. Its long slender design will reward you with straight, out-of-site flights. This hot-looking rocket floats back to earth on a pre-assembled 12 inch parachute. Standard Engine powered, the EPM-010 soars to over 900 feet.

    Interceptor Model Rocket Kit

    Estes Interceptor Model Rocket Kit

    Envisioned by Estes designers to be operational by 2050, the Estes “Interceptor” is an ultra-sophisticated rocket that could patrol our galaxy for possible aggression by hostile aliens. Highly advanced defense systems, which includes photon and laser armaments as well as ION drive for extended tours around the Milky Way only enhance the rocket! This kit returns with quality features Estes is known for like laser cut balsa parts, two full color waterslide decals and detailed plastic parts including the nose cone, wing pods, and tail cone.

    When properly outfitted for launch, flights over 500 feet are possible with a soft landing on a colorful 18” parachute. The futuristic looking Interceptor is sure to be the envy of everyone at the launch site.

    Towering over two feet tall, the Interceptor delivers excellent flight performance on B and C engines. When launched on the recommended C engine, this gorgeous rocket blasts to heights of more than 525 feet.

    Photon Probe Model Rocket Kit

    Estes Photon Probe Model Rocket Kit

    The Estes Photon Probe is a "Classic Series" re-issue of a futuristic kit which was originally released in 1991.

    Plasma Probe Model Rocket Kit

    Estes Plasma Probe Model Rocket Kit

    The Estes Plasma Probe captures the futuristic design of Centuri kits from the 1970s.

    QCC Explorer Model Rocket Kit

    Estes QCC Explorer Model Rocket Kit

    Don't let the looks fool you with this Skill Level 4 kit. It may look like it's simple to build, but what's under the paint will surprise you! Each simulated air intake/fin assembly is constructed from 12 interlocking laser cut balsa pieces.

    Screaming Eagle Model Rocket Kit (OOP)

    Estes Screaming Eagle Model Rocket Kit (OOP)

    This out of production kit from Estes is new in the original packaging.

    The ultra-cool Estes Screaming Eagle looks great sitting in the hanger, but screams to be out soaring with the other eagles. Let this bird out of his cage and experience the thrill of flying with a stealthy hunter. The Screaming Eagle soars to nearly 600 feet using standard model rocket engines. After each flight, the Screaming Eagle lands softly under a bright 12-inch preassembled parachute, making for an enjoyable afternoon of bird watching.

    This superbly-detailed rocket has awesome markings that will be the envy of all rocketeers. Great to fly or to display, the Estes Screaming Eagle features laser-cut balsa fins and waterslide decals.

    Shuttle Xpress Model Rocket Kit

    Estes Shuttle Xpress Model Rocket Kit

    The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.

    The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.

    After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!

    The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.

    Solar Warrior Model Rocket Kit

    Estes Solar Warrior Model Rocket Kit

    A sleek sport rocket standing 27 inches tall, the Solar Warrior is screaming to be added to your collection. This rocket can heights over 900 feet.

    The Solar Warrior flies on C11 and D and engines and a bright 18-inch parachute brings it back to earth. Be the first in your neighborhood to get this hot rocket!

    Planet Probe Model Rocket Kit

    Quest Aerospace Planet Probe Model Rocket Kit

    Fun to fly and easy to build, the cone-shaped Planet Probe rocket is perfect for small flying areas.

    The Planet Probe features gentle tumble recovery. No recovery wadding is required, so the Planet Probe is easy and quickly prepared for flight.

    Some tips for building the Planet Probe:

    The shroud is pre-printed on one side, but is plain white on the other. As an alternative to using the pre-printed side, you can flip the shroud over and use the white side. The white side may be decorated, before or after assembly, with paint or markers.

    Gluing the cardstock internal fins to the motor mount tube can be challenging. To make it easier, lightly sand both the root edges of each fin and the places on the motor tube where the fins will be glued. Redraw the lines on the motor tube after sanding. Sanding the surfaces gives a slightly rougher finish which allows the glue to adhere better. Apply a light bead of glue along the line on motor tube. Stick the root edge of the fin to the glue. Pull the fin away and wait a few seconds. Then stick it back in place. Hold the fin in place for a while until it is steady before trying to glue the next fin.

    An alternative way to attach the fins to the motor tube is to use a thin bead of CA ("Super") glue. Be careful when aligning the fin and pressing it into the glue because the glue will grab instantly. Let the glue dry for an hour or two then apply a fillit of white or wood glue along each fin's edge as described in the kit's instructions.

    Hydra One Model Rocket Kit

    Semroc Hydra One Model Rocket Kit

    The Hydra One is a smaller counterpart to the Semroc Hydra VII.

    Laser X Model Rocket Kit

    Semroc Laser X Model Rocket Kit

    The Laser-X is Semroc's version of a rocket kit first advertised by Centuri in 1968 in the American Rocketeer magazine.

    Mars Lander Model Rocket Kit

    Semroc Mars Lander Model Rocket Kit

    Semroc's Mars Lander is based on the classic Estes kit which was produced from 1969 to 1983.

    Although a challenge to build, you'll be pleased with the result. Semroc's parts and instructions are of the highest quality.

    Moon Glo Model Rocket Kit

    Semroc Moon Glo Model Rocket Kit

    Semroc's Moon Glo is a reproduction of the 1963 Rocket Development kit designed by Irv Wait.

    MX Mars Lander (MicroMaxx Downscale) Model Rocket Kit

    Semroc MX Mars Lander (MicroMaxx Downscale) Model Rocket Kit

    The Semroc MX Mars Lander is a tiny replica of the classic kit from Estes. The kit includes a high-quality 3D-printed nose cone, colorful decals, laser-cut parts, and a special jig to help with the assembly. A streamer is included for recovery.

    MX Orbital Transport (MicroMaxx Downscale) Model Rocket Kit

    Semroc MX Orbital Transport (MicroMaxx Downscale) Model Rocket Kit

    Semroc has produced a MicroMaxx-powered, down-scale flying model rocket kit based on the classic Estes Orbital Transport design. Just 8.6" in length when built, this rocket features a piggy-back orbiter which glides back to earth while the booster deploys a streamer for recovery.

    Orion Model Rocket Kit

    Semroc Orion Model Rocket Kit

    Featuring a balsa nose cone, laser-cut fins, and an internal baffle system, Semroc's Orion flying model rocket kit is a modern update of the classic Centuri kit of the 1970s.

    Red Eye Model Rocket Kit

    Semroc Red Eye Model Rocket Kit

    The Red-Eye kit was originally released in 1980 by Centuri Engineering Company as the enemy satellite for their new Satellite Killer. Both of these models were a part of their “War in Space” series. Since these were done in the final days of Centuri, as a separate company from Estes Industries, there were no later entries. The Red-Eye was an “upscale” of the earlier Satellite 62SL and used the same fiber fin sheets. It was released as Catalog Number 5346 and had an introductory price of $2.00.

    The Semroc Retro-Repro Red-Eye is updated with laser-cut fins. The original plastic nose cone is replaced with balsa. The engine mount is added to work with a wide range of mini-engines instead of a standard 1/2A6 engine.

    Satellite Killer Model Rocket Kit

    Semroc Satellite Killer Model Rocket Kit

    The Satellite Killer model rocket kit was released in 1980 by Centuri Engineering Company along with the Red-Eye as its enemy satellite. Inspired by the cold war "Star Wars" proposal, these models were a part of Centuri's "War in Space" series. Since these were done in the final days of Centuri as a separate company from Estes Industries, there were no later entries.

    The Semroc Retro-Repro Satellite Killer kit is updated with laser-cut fiber fins. The original foil decals are changed to waterslide for ease of use and durability. A Kevlar cord is added for a more reliable shock mount. Most of the rest of the model is faithful to the original design.

    Space Shuttle Model Rocket Kit

    Semroc Space Shuttle Model Rocket Kit

    Semroc's Space Shuttle is a reproduction of the Centuri classic from the 1970s. The booster is recovered by a streamer while the two shuttles separate and glide back to earth.

    SPEV Model Rocket Kit

    Semroc SPEV Model Rocket Kit

    Semroc's "Space Exploration Vehicle" (SPEV) is based on the 1972 Estes kit.

    Starlight Model Rocket Kit

    Semroc Starlight Model Rocket Kit

    Semroc's Starlight kil is a reproduction of the 1960's Estes kit designed by Bill See.

    Starship Excalibur Model Rocket Kit

    Semroc Starship Excalibur Model Rocket Kit

    The Starship Excalibur was originally released as a plan from Estes in the late 1960s. This futuristic vision of a space liner flies up to 700 feet on a C motor. The kit includes seven precision-turned balsa nose cones, laser-cut parts, water-slide decals, and a parachute.

    Starship Vega Model Rocket Kit

    Semroc Starship Vega Model Rocket Kit

    Semroc brings back another classic from the past with the Starship Vega flying model rocket kit. Sporting a futuristic design, the Starship Vega made its first appearance in the 1973 Estes catalog.

    Tau Zero Model Rocket Kit

    Semroc Tau Zero Model Rocket Kit

    Semroc's Tau Zero looks great and flies straight.

    Taurus Fleet Ship Model Rocket Kit

    Semroc Taurus Fleet Ship Model Rocket Kit

    The Centuri Taurus Fleet Ship was initially released in 1972. It was designed to look like an alien plane-ary cruiser from the far away planet of Taurus. A short science fiction history was provided with the kit.

    Featuring six nose cones and reducers, the Centuri Taurus was introduced as catalog #KB-3.

    Semroc's Retro-Repro Taurus is a modern recreation of the original. It uses all balsa nose cones and transitions. Laser-cut balsa fins are included instead of the original die-cut parts. A slightly smaller chute is provided since the model is much lighter due to the use of balsa instead of plastic. A Kevlar cord is provided for better shock cord retention.

    Trident Model Rocket Kit

    Semroc Trident Model Rocket Kit

    Estes released its Trident kit in 1967. Semroc's re-issue of this futuristic classic features laser-cut fins and waterslide decals.

    USS America Model Rocket Kit

    Semroc USS America Model Rocket Kit

    Semroc's USS America is based on the Centuri kit from the mid 1970s.

    VF-261 Model Rocket Kit

    Semroc VF-261 Model Rocket Kit

    Based on drawings made by Vern Estes, the VF-261 model rocket kit includes laser-cut fins and a balsa nose cone.



Copyright © 2019 JonRocket.com LLC