This Skill Level 2 kit from Estes is another bring-back of a classic. The Alien Invader kit includes a high-quality plastic nose cone, laser-cut wood fins and waterslide decals which mimic the original kit.
The Alpha III's plastic fin assembly makes building the kit quick, easy, and almost foolproof.
This educator bulk pack contains 12 Alpha III kits. The Alpha III is one of the most reliable, easiest to build rockets. It features a dynamic look - a gloss black body tube with a fluorescent orange plastic fin unit and nose cone. The Alpha III requires no painting.
The Estes Alpha has introduced many millions to model rocketry since its introduction more than 35 years ago. Easy-to-build, the Alpha looks great and flies great.
The Alpha is a classic Skill Level 1 kit. It includes a one-piece body tube, laser-cut wood fins, and an aerodynamic nose cone.
Building the Alpha takes about an afternoon. When powered with a C engine, the rocket can reach altitudes of 1,000 feet. Recovery is accomplished with a colorful 12-inch preassembled parachute.
The Estes Asteroid Hunter has a unique sci-fi design that will blow you away. This kit is a challenge to construct but will reward you with its out-of-this-world exotic appearance.
Powered by standard engines, expect to be impressed with the glider flight of the Astron Skydart II. Absolutely the coolest glider rocket Estes makes, one minute duration glides are fully possible. Be the first on your block to get this cool rocket.
The Estes Chuter 2 features dual parachutes which bring this classic rocket back to Earth in style after blasting off to heights of up to 900 feet. The unique fin design and colorful body of the Chuter-Two make it a great rocket for anyone.
Estes has gone back to the archives and pulled up old drawings and spec sheets to bring back this vintage design. The kit has been reproduced and updated while retaining the classic lines of the original. The Chuter-Two kit contains high-quality body tubes, a balsa nose cone, and laser-cut balsa fins.
The new Estes Cobra is a menacing, futuristic fighter. Standing 18" tall, the Cobra has an 8" wing span.
This kit includes laser-cut wood fins and waterslide decals.
The Comet Chaser soars over 1,100 feet and is powered by standard engines. Simple to glue and paint, the Comet Chaser deserves to be in your rocket collection or if you are just starting out, it's a great starter rocket. Just a few hours of your time and you'll be ready to go!
Prioviously only available in a launch set, the Estes Crossfire ISX is, perhaps, the coolest looking beginner's kit in Estes's catalog. With laser-cut wood fins and bright, self-stick decals, the Crossfire ISX flies on standard-size motors and is recovered by parachute.
A couple of hours of your time and you're off to the flying field with the really cool Dark Zero from Estes! This kit is easy to build and all the parts are pre-colored so there's no need to bother with paint.
The EPM-010 features swept forward fins with outer navigational pods for interplanetary space travel. Its long slender design will reward you with straight, out-of-site flights. This hot-looking rocket floats back to earth on a pre-assembled 12 inch parachute. Standard Engine powered, the EPM-010 soars to over 900 feet.
The Estes Flip Flyer is an easy-to-assemble kit featuring parachute and helicopter recovery. The nose of the rocket returns to earth under a parachute while the body deploys rotors and returns like a helicopter.
The Estes Fusion X-25 is a cool Skill Level 1 rocket with a unique fin design. A show stopper, the Fusion X-25 was designed with the new rocketeer in mind. The Fusion X-25 is simple to build yet impressive on the launch pad. Launched on standard Estes motors, this rocket can reach heights over 1100 feet.
The Estes Mini Honest John is a mini-engine-powered sport scale model of the U.S. battle field artillery missile. The kit features a detailed molded nose cone and laser-cut balsa fins. Simple to build, the resulting model features plenty of detail that you will be proud to display.
Estes has created a smaller version of their classic Der Red Max kit. Just like the Der Red Max, the Mini Max is uniquely designed. It has the same ballistic-shaped nose cone and stubby fins as its bigger counterpart. Standing almost 10 inches tall, this miniature version definitely has a personality all its own!
Powered by Estes mini engines,the Mini-Maxcan reach amazing heights of 400 feet. After its aerial assault, recovery is accomplished with a high-vizability streamer.
The new Mini Max has all the great looks of the classic version, right down to the really cool skull and crossbones decals.The Mini features a balsa nose cone, laser cut balsa fins and waterslide decals.
Looking for your first two-stage rocket? Consider the Estes Mongoose. Plastic one-piece fin units make assembly quick and easy.
This fun No. 2 Skywriter rocket looks like a wooden pencil. The Skywriter includes colored body tubes, fins, and nose cone, so assembly is quick and easy.
The Payloader II was a popular kit marketed by Centuri from about 1965 to 1981. Estes has re-issued and updated this classic kit.
Estes produced the Pegasus kit from about 1993 through 1995. The quickly-bulit rocket requires no painting.
This is an out-of-production kit.
This Skill Level 1 rocket is part of Estes's "Basic Builder Series."It is simple to build and paint, but features distinctive Air-to-Air missile styling. The Ricochet flies up to 1125 feet on a C motor.
The ultra-cool Estes Screaming Eagle looks great sitting in the hanger, but screams to be out soaring with the other eagles. Let this bird out of his cage and experience the thrill of flying with a stealthy hunter. The Screaming Eagle soars to nearly 600 feet using standard model rocket engines. After each flight, the Screaming Eagle lands softly under a bright 12-inch preassembled parachute, making for an enjoyable afternoon of bird watching.
This superbly-detailed rocket has awesome markings that will be the envy of all rocketeers. Great to fly or to display, the Estes Screaming Eagle features laser-cut balsa fins and waterslide decals.
Standing almost 3 feet tall, the Etses Shattered features a clear body tube in the middle of the rocket and a colorful parachute for recovery. Powered by standard engines, this easy-to-assemble rocket won't take long to build so you will have more time for fun.
The Estes Sky Cruiser is an easy-to-assemble model rocket kit featuring a plastic fin unit and self-stick decals.
The Solar Flare features a payload capsule and can be flown as a single stage or two stage rocket.
This flashy, two-stage rocket is sure to be the buzz of rocket enthusiasts everywhere, so why not be among the first to own one. This two-stage rocket stands over 28 inches tall. Its innovative ring design makes this rocket a one of a kind on any launch pad.
The Solar Flare is a Skill Level 2 rocket kit that features laser-cut balsa fins, high quality body tubes, clear payload section, and a plastic nose cone for a straight-forward assembly. The B or C powered booster stage has a tapered look and makes this rocket look like an intergalactic researcher. In addition to a two-stage rocket, you can fly the upper stage on an A10 mini engine without the booster. You're actually getting two extremely cool rockets in one kit.
This rocket features a colorful 12-inch preassembled parachute for the upper stage.
The Estes Space Eagle is simple to build and exciting to fly. Standing over 26 inches (66 cm) tall, the Space Eagle is sure to be a crowd pleaser.
The Star Stryker is a striking, but easy to build, rocket from Estes.
The Estes Super Neon features special "tubular flight stabilizers" which will make this rocket a favorite to build and fly. Watch the Super Neon model rocket soar to heights of almost 1000 feet using standard Estes motors.
The Estes Super Nova is a two-stage payload rocket. Feauring a clear payload section and parachute recovery, the Super Nova kit includes laser-cut wood fins.