Your Shopping Cart is empty

Diameter (in) in range 1.3...1.4

    Black Brant IV Model Rocket Kit

    Aerospace Speciality Products Black Brant IV Model Rocket Kit (1.3850)

    The Black Brant IV is a Canadian sounding rocket designed to launch payloads to over 500 miles high. First flown in 1964, the two-stage rocket was used into the 1980's. Over fifty flew from launch sites all over the world, including Peru, Spain, Norway, Greenland, and the U.S. among others.

    ASP's single-stage scale kit is nearly three feet tall and features a balsa transition and hard balsa nose cone, laser-cut basswood fins, water-slide and self-adhesive decals, and a quick-change engine hook. You can fly this model on a wide range of engines, with fairly low altitudes on a C, but practically out-of-sight flights on an E! Designed primarily for 24mm C, D & E engines, it can also be flown on selected 18mm engines with an adapter (not included). A bright metallic parachute returns it to the ground for flight after flight.

    RP-3 (24mm) Model Rocket Kit

    Aerospace Speciality Products RP-3 (24mm) Model Rocket Kit (1.3250 - BT-55)

    The RP-3 was an unguided experimental Polish rocket. Earlier versions of the RP series were used for diverse purposes such as wind studies and carrying "Rocket Mail." The RP-3 was first built in 1963 and stood over seven feet tall.

    ASP's scale model is 22" tall. This unique-looking kit is a sturdy model for D and E powered flights, yet it is still light enough to fly on selected 18mm engines with a motor adapter (not included). The kit includes laser-cut ply fins, balsa nose cone, and decal. Many who own this kit count it among their favorites.

    Sky-Ferry (24mm) Model Rocket Kit

    Aerospace Speciality Products Sky-Ferry (24mm) Model Rocket Kit (1.3260)

    ASP's Sky-Ferry is a big (over 2 1/2 feet tall!), easy-to-build model rocket. The Sky-Ferry makes a great first or second rocket kit. Designed with the beginner in mind, it's also a great sport flier for the more experienced modeler.

    The Sky-Ferry features balsa fins, a balsa nose cone, a big payload section (it will hold many commercial electronics), a quick change engine hook, and a bright parachute for recovery. Designed to fly primarily on 24mm engines, it can also fly on 18mm engines with an adapter (not included).

    Super Loki Dart (24mm) Model Rocket Kit

    Aerospace Speciality Products Super Loki Dart (24mm) Model Rocket Kit (1.3250 - BT-55)

    The Super Loki-Dart is one of NASA's workhorses for lofting small payloads. Radar chaff, inflatable spheres, and radiosondes for meteorological data are some of the payloads sent aloft by this vehicle.

    ASP's scale model is both fun and challenging to build. It includes a full decal set. At 3 1/2 feet tall, this is an impressive model that always attracts attention. Rockets built from this kit have placed in both regional and national competitions.

    WAC Corporal (Two Stage 24mm to 18mm) Model Rocket Kit

    Aerospace Speciality Products WAC Corporal (Two Stage 24mm to 18mm) Model Rocket Kit (1.3260)

    This detailed model features a balsa boattail, hard balsa nose cone, and laser-cut balsa fins. Using the "Pass - Port" staging method, a D12-0 booster fires an 18mm upper stage motor for impressive, two-stage flights. The upper stage may also be flown as a single stage model. Recommended for the advanced modeler.

    Astron Explorer Model Rocket Kit

    Estes Astron Explorer Model Rocket Kit (1.3300)

    Standing more than 42" tall when assembled, this Skill Level 4 kit includes waterslide decals and plastic nose cones.

    Bull Pup 12D Model Rocket Kit

    Estes Bull Pup 12D Model Rocket Kit (1.3300)

    The Estes Bull Pup 12D is a sport-scale version of the Air Force's AGM-12D Bull Pup missile. The Bull Pup makes a great first scale model.

    CC Express Model Rocket Kit

    Estes CC Express Model Rocket Kit (1.3300)

    The Estes CC Epress is multi-staging at its best. The CC Express has blistering performance and great looks. It features a one-piece body tube, molded plastic nose cone, and laser-cut wood fins for easy assembly. The self-stick decals will make this high altitude specialist a real stand out at any launch site. The CC Express is a must have for any rocket enthusiast looking for ultimate, high flying excitement!

    Centuri Model Rocket Kit

    Estes Centuri Model Rocket Kit (1.3300)

    A tribute to yesterday's rockets, the Estes Centuri features laser-cut wood fins and a 12" parachute.

    Chiller Model Rocket Kit

    Estes Chiller Model Rocket Kit (1.3300)

    The Estes Chiller is an "Almost Ready to Fly" model rocket. Its shiny chrome nose cone makes it easy to track on a sunny day. Assembly is so simple, slip the fin into the fin slots then attach the recovery system. Add the BT-55 Booster Accessory (sold separately) for two-stage flights.

    Chrome Domes Gold Model Rocket Kit

    Estes Chrome Domes Gold Model Rocket Kit (1.3500)

    With gold chrome fins and nose cone, the Estes Chrome Domes Gold model rocket kit is sure to put a sparkle in your eye. A prismatic body tube completes the jewel-like appearance of this easy-to-build rocket kit.

    Cosmic Cobra Model Rocket Kit

    Estes Cosmic Cobra Model Rocket Kit (1.3300)

    You'll be amazed when the rocket returns to earth with a parachute while the nose cone helicopters down.

    The Cosmic Cobra streaks to altitudes over 500 feet high. Two recovery devices are used to tame this reptile. The main rocket, with upswept fins, returns to earth on a colorful 12 inch parachute while the sleek nose cone helicopters down on bright colored, retractable rotor blades. Assembly of the Cobra takes about one hour or less, making it a great choice for any beginner! You'll draw a crowd at the flying field when you blast this unique rocket into space!

    Cosmic Explorer Model Rocket Kit

    Estes Cosmic Explorer Model Rocket Kit (1.3300)

    This sleek design from Estes features quality body tubes, a large balsa nose cone, laser-cut balsa fins, and easy-to-apply waterslide decals.

    Eggscaliber Model Rocket Kit

    Estes Eggscaliber Model Rocket Kit (1.3500)

    The Estes Eggscaliber has a special clear payload section which holds an egg. With the included engine adapter, it can fly on B/C or D/E motors.

    A motor adapter is included so you can launch your rocket on standard Estes engines or remove the adapter to fly the rocket on more powerful D or E engines. The Eggscaliber with its large payload section is also great for science experiments. The Eggscaliber is a Skill Level 2 kit which requires more skills in building and painting.

    Use of an E motor requires a larger launch pad such as the Estes Porta-Pad E and a more-powerful launch controller such as the Estes E Launch Controller. The launch pad and controller ore sold separately.

    Eggs (and bacon) not included.

    Recommended Motors (with egg): B6-2, C6-3, C11-3, D12-3, E9-4
    Recommended Motors (no egg): B4-2, B6-2, C6-5, D12-5, E9-6

    Eliminator Model Rocket Kit

    Estes Eliminator Model Rocket Kit (1.3500)

    The Estes Eliminator is a super high performance model rocket design intended for high altitude, cloud punching flying on our powerful E engines! The rocket is almost 31 inches tall and features purple wrapped body tubes and a one piece molded fin set that can handle all the power an E can deliver. A bright yellow nose cone sits atop the rocket while the tribal looking self-stick decals add to its visibility...which you're going to need as the E engine pushes this beast up to 1,400 feet.

    Assembly of this high performance hot rod takes about an hour. When completed you'll be ready for the flight pad for some serious high altitude, blistering fast model rocket flying. Recovery is accomplished using a colorful 12 inch, preassembled parachute for soft landings. Includes an adapter that allows you to quickly convert from E to D engine power.

    Eliminator XL Launch Set

    Estes Eliminator XL Launch Set (1.3500)

    The Estes Eliminator XL rocket stands 44 inches tall. Assembly is easy, just twist the sections together. The Eliminator XL is ready to launch in just a few minutes.

    This set includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. A 3/16-inch Maxi Launch Rod is also included.

    Engines, batteries, and other supplies are not included.

    Goblin Model Rocket Kit

    Estes Goblin Model Rocket Kit (1.3300)

    Estes has brought back another classic model rocket kit. The Estes Goblin first appeared in the early 1970s and has remained a favorite of rocketry modelers through the decades.

    Guardian Model Rocket Kit (Non-Retail Packaging)

    Estes Guardian Model Rocket Kit (Non-Retail Packaging) (1.3300)

    With a multi-fin design resembling a surface-to-air missile, the Guardian is a Skill Level 2 rocket with parachute recovery.

    This is a new kit, still sealed in clear packaging rather than fancy retail packaging.

    Helicat Launch Set

    Estes Helicat Launch Set (1.3500)

    In just a few minutes you will have this rocket ready for the launch pad. The Estes HeliCAT features a unique helicopter nose cone recovery that is a blast to watch land.

    You will need glue and plastic cement, but assembly of the HeliCAT is easy and no painting is necessary. Powered by standard Estes engines, this quickly built rocket reaches heights of over 500 feet.

    This is a launch set which includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. Batteries, rocket motors, and other launch supplies are not included.

    Hornet Model Rocket Kit

    Estes Hornet Model Rocket Kit (1.3300)

    The Estes Hornet is a sporty, easy-to-assemble rocket featuring an eye-catching waterslide decal.

    Magician Model Rocket Kit

    Estes Magician Model Rocket Kit (1.3300)

    Conjure up some special space magic with the Magician! No tricks up anyone's sleeve here, just a super high performance payload model rocket. The talented Estes rocket shop designers have spun their magic to create an enormous, supersized payload rocket. The Magician can handle all the power you put in the motor tube to send it on a magical mystery tourof the atmospheric kind.

    This sorcerer stands an impressive 33.5 inches tall and has a clear payload section. You can launch just about anything into space. Well, not quite anything, but its sure to hold a small race car, an action figure, or whatever your imagination can dream up. If it fits into the payload section, launch it.

    A Skill Level 3 rocket, this kit comes with a high quality balsa nose cone, laser cut balsa fins and waterslide decals. Designed to be flown on D or E engines, this rocket will scream off the launch pad to heights over 1,600 feet. Getting this illusionist back to earth is magically accomplished on a colorful pre-assembled 18 inch parachute.

    Nike-X Model Rocket Kit

    Estes Nike-X Model Rocket Kit (1.3300)

    The Estes Nike-X single-stage rocket is a scale-like model of the US Army's fourth-generation, two-stage surface-to-air interceptor missile. This kit features a Nike-style design with Army details including high-quality, realistic roll-pattern waterslide decals.

    Odyssey Model Rocket Kit

    Estes Odyssey Model Rocket Kit (1.3300)

    The Estes Odyssey is a futuristic rocket powered by 24mm motors. Packed with Sci-Fi details, the Odyssey is a challenging, Skill Level 5 kit.

    Phoenix Bird Model Rocket Kit

    Estes Phoenix Bird Model Rocket Kit (1.3300)

    Based on the classic Centuri Phoenix Bird kit from the late 1970s, the new Estes Phoenix Bird features through-the-wall fins and self-stick foil decals.

    Photon Probe Model Rocket Kit

    Estes Photon Probe Model Rocket Kit (1.3200)

    The Estes Photon Probe is a "Classic Series" re-issue of a futuristic kit which was originally released in 1991.

    Plasma Probe Model Rocket Kit

    Estes Plasma Probe Model Rocket Kit (1.3300)

    The Estes Plasma Probe captures the futuristic design of Centuri kits from the 1970s.

    Red Rider Model Rocket Kit

    Estes Red Rider Model Rocket Kit (1.3300)

    Red Rider is another of Este's new almost-ready-to-fly rockets. Assembly consists of little more than sliding the fins into the fin can. The Red Rider is a single-stage rocket, but you can add the BT-55 Booster accessory (sold separately) to convert it to a two-stage rocket.

    Reflector Model Rocket Kit

    Estes Reflector Model Rocket Kit (1.3300)

    The easy-to-assemble Estes Reflector has a large payload section, laser-cut fins, and waterslide decals.

    Savage Model Rocket Kit

    Estes Savage Model Rocket Kit (1.3300)

    The Estes Savage is an easy-to-build two-stage rocket. It provides an excellent introduction to multi-stage rocketry.

    Shuttle Xpress Model Rocket Kit

    Estes Shuttle Xpress Model Rocket Kit (1.3300)

    The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.

    The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.

    After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!

    The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.

    Sky Twister Model Rocket Kit

    Estes Sky Twister Model Rocket Kit (1.3500)

    The easy-to-assemble Sky Twister features a nose cone with helicopter recovery. The nose cone deploys rotor blades and spins back to earth while the rest of the rocket returns under a parachute.

    Stratocruiser Model Rocket Kit

    Estes Stratocruiser Model Rocket Kit (1.3300)

    A Skill Level 1 kit, the Stratocruiser looks massive but is an easy builder. Use the really cool color scheme shown or create your own! Either way, the waterslide decals included add a nice finishing touch to your rocket.

    Launched on standard Estes Engines, this rocket can reach heights of 725 feet. A preassembled parachute makes for a soft landing. Repack the parachute, grab a new engine and you're ready for another launch!

    Vector Force Model Rocket Kit

    Estes Vector Force Model Rocket Kit (1.3300)

    Standing over two feet tall, the Estes Vector Force is a simple to build and finish rocket. The kit features high-quality laser-cut balsa fins, waterslide decals, and easy-to-follow instructions.

    Xarconian Cruiser Model Rocket Kit

    Estes Xarconian Cruiser Model Rocket Kit (1.3300)

    The next generation in planetary defense is the Xarconian Cruiser. It is capable of both planetary and space flight. The cruiser's Hyper-Plasma engine pods serve as booth propulsion and offensive weaponry.

    Estes's flying model of this future interplanetary spaceship contains many details that a craftsman modeler will enjoy. This Skill Level 5 rocket flies over 500 feet and returns safely to earth under an 18-inch parachute.

    Klingon Bird of Prey Model Rocket Kit

    MPC Klingon Bird of Prey Model Rocket Kit (1.3800)

    This Star Trek themed rocket is easy to build. It features a clear green payload compartment.

    Courier Model Rocket Kit

    Quest Aerospace Courier Model Rocket Kit (1.3100)

    We can't think of many other ways that you can send an egg sailing 400 ft into the air and return it safely (and in time for breakfast!) The specially designed nose capsule comes unpadded - requiring your students to experiment with various methods of protecting Mr. Egg. The Courier model rocket is a traditional balsa fin design and carries it's own dual parachute recovery.

    Flies with Quest B6-2, B6-4 and C6-3 rocket motors. Can also use Estes B6-2, B6-4 and C6-5 rocket motors.

    Triton-X Model Rocket Kit

    Quest Aerospace Triton-X Model Rocket Kit (1.3800)

    The Quest Triton-X is a large, easy-to-build rocket. The transition and striking decal make this a cool-looking rocket.

    Bandit Model Rocket Kit

    Semroc Bandit Model Rocket Kit (1.3250 - BT-55)

    Semroc's Bandit is an update of the Estes kit from the early 1970s. The original Bandit was designed by Mark Kellner and was one of the first models to use a ducted ejection system of baffles to eliminate the need for recovery wadding. The elegant design of the internal baffles is hidden as the model is built, but teaches the principles of cooling the gases before the chute is deployed.

    The Semroc Retro-Repro Bandit is very similar in design to the original. Its laser-cut internal tubes are thicker and the holes are slightly larger to accommodate modern engines. The original's die-cut fins are replaced with more accurate laser-cut fins.

    Blue Bird Zero Model Rocket Kit

    Semroc Blue Bird Zero Model Rocket Kit (1.3250 - BT-55)

    Semroc's Blue Bird Zero is a reproduction of the classic Estes kit.

    The original Blue Bird Zero was designed by Mike Dorffler while at Estes Industries. Mike was one of the most prolific designers of model rocket kits and accessories over his many years in the business. Best known as the inventor the Cineroc, Mike is also remembered fondly for all of his classics designs such as the Blue Bird Zero. It was released in the 1980 Estes Catalog as #1335.

    Cherokee D Model Rocket Kit

    Semroc Cherokee D Model Rocket Kit (1.3250 - BT-55)

    Semroc has reproduced one of the most striking of Estes's classic kits. The Cherokee-D flies on D motors for impressive flights. Semroc's kit features waterslide decals and laser-cut fins.

    Goblin Model Rocket Kit

    Semroc Goblin Model Rocket Kit (1.3250 - BT-55)

    Semroc's Goblin kit features laser-cut balsa fins, a precision-turned balsa nose cone, and water-slide decals. Fly the Goblin on powerful 24mm D motors or use the included adapter to for smaller, 18mm motors.

    Laser X Model Rocket Kit

    Semroc Laser X Model Rocket Kit (1.3400)

    The Laser-X is Semroc's version of a rocket kit first advertised by Centuri in 1968 in the American Rocketeer magazine.

    UFO Invader Model Rocket Kit

    Semroc UFO Invader Model Rocket Kit (1.3400)

    The year is 1980 and at last the existence of flying saucers is a proven fact. First sighted in the mysterious Bermuda Triangle, the U.F.O. Invader has been observed by countless eyewitnesses. The Invader is a submarine as well as a deep space ship...able to travel on the ocean surface, buoyed by its wing pods. It submerges to a hidden undersea base where the aliens perhaps study Earth and its people. Little is known about the aliens, but we know this: we are not alone in the universe!

    Semroc's UFO Invader kit is based on the 1970s Centuri "Super Kit." The kit features a balsa nose cone, laser-cut fiber fins, and waterslide decals. Includes two parachutes for recovery.



Copyright © 2019 JonRocket.com LLC