Your Shopping Cart is empty

Fin Material = Plastic

    3 Bandits Model Rocket Kits

    Estes 3 Bandits Model Rocket Kits

    The Estes 3 Bandits assortment includes three easy-to-assemble mini-engine rockets.

    • Length - 10.8 in. to 11.1 in. (27.4 to 28.3 cm)
    • Diameter - .74 in. (19 mm)
    • Estimated Weight - .6 to .71 oz (19.8 to 20.1 g)
    • Plastic fins, self-stick decals, 6 in. (15.2 cm) parachute recovery
    Airwalker Model Rocket Kit

    Estes Airwalker Model Rocket Kit

    This is a "reintro" of the popular Air Walker model rocket kit from Estes. A clear payload section adds to the fun of this rocket. Building remains the same as the original kit and is easy to build no matter what your experience level. Have this rocket on the launch pad in a quick afternoon and enjoy countless launches.

    Alien Green Crayon Model Rocket Kit

    Estes Alien Green Crayon Model Rocket Kit

    The Green Alien model rocket kit is almost ready to fly. This crayon-themed rocket stands almost 20" tall and features a twist-on fin section when also acts as a motor retainer.

    Alpha III Launch Set

    Estes Alpha III Launch Set

    The Estes Alpha III Launch set includes the classic, easy-to-build Alpha III model rocket kit, a launch pad, and a controller.

    Alpha III Model Rocket Kit

    Estes Alpha III Model Rocket Kit

    The Alpha III's plastic fin assembly makes building the kit quick, easy, and almost foolproof.

    Alpha III Model Rocket Kit Bulk Pack (12)

    Estes Alpha III Model Rocket Kit Bulk Pack (12)

    This educator bulk pack contains 12 Alpha III kits. The Alpha III is one of the most reliable, easiest to build rockets. It features a dynamic look - a gloss black body tube with a fluorescent orange plastic fin unit and nose cone. The Alpha III requires no painting.

    Ascender Model Rocket Kit

    Estes Ascender Model Rocket Kit

    The Ascender is an easy-to-build entry in Estes's Pro Series II series of larger model rockets. Flying on 29mm E and F motors, the Ascender features plastic fins, self-stick decals, a screw-on motor retainer and an 18" nylon parachute. The Pro Series II E2X Booster (not included) may be used with the Ascender to create a two-stage rocket that can reach more than 3000' in altitude.

    Atomic Aqua Model Rocket Kit

    Estes Atomic Aqua Model Rocket Kit

    One of Estes's series of "ready-to-fly" crayon rockets, the Atomic Aqua flies to more than 500 feet on a C motor.

    Bandito Model Rocket Kit

    Estes Bandito Model Rocket Kit

    The Estes Bandito is a sporty, easy-to-assemble model rocket kit which flies on mini-engines.

    Black Hole Model Rocket Kit

    Estes Black Hole Model Rocket Kit

    One of Estes's series of crayon-inspired rockets, the Black Hole is almost ready to fly. Standing almost 20 inches tall, this rocket goes well over 500 feet.

    Blast Off Blue Model Rocket Kit

    Estes Blast Off Blue Model Rocket Kit

    Blast off with the Estes Blast Off Blue flying model rocket. This kit comes pretty much ready to fly and soars to more than 500 feet on a C motor.

    Chrome Domes Gold Model Rocket Kit

    Estes Chrome Domes Gold Model Rocket Kit

    With gold chrome fins and nose cone, the Estes Chrome Domes Gold model rocket kit is sure to put a sparkle in your eye. A prismatic body tube completes the jewel-like appearance of this easy-to-build rocket kit.

    Cosmic Cobra Model Rocket Kit

    Estes Cosmic Cobra Model Rocket Kit

    You'll be amazed when the rocket returns to earth with a parachute while the nose cone helicopters down.

    The Cosmic Cobra streaks to altitudes over 500 feet high. Two recovery devices are used to tame this reptile. The main rocket, with upswept fins, returns to earth on a colorful 12 inch parachute while the sleek nose cone helicopters down on bright colored, retractable rotor blades. Assembly of the Cobra takes about one hour or less, making it a great choice for any beginner! You'll draw a crowd at the flying field when you blast this unique rocket into space!

    Dark Zero Model Rocket Kit

    Estes Dark Zero Model Rocket Kit

    A couple of hours of your time and you're off to the flying field with the really cool Dark Zero from Estes! This kit is easy to build and all the parts are pre-colored so there's no need to bother with paint.

    Eliminator Model Rocket Kit

    Estes Eliminator Model Rocket Kit

    The Estes Eliminator is a super high performance model rocket design intended for high altitude, cloud punching flying on our powerful E engines! The rocket is almost 31 inches tall and features purple wrapped body tubes and a one piece molded fin set that can handle all the power an E can deliver. A bright yellow nose cone sits atop the rocket while the tribal looking self-stick decals add to its visibility...which you're going to need as the E engine pushes this beast up to 1,400 feet.

    Assembly of this high performance hot rod takes about an hour. When completed you'll be ready for the flight pad for some serious high altitude, blistering fast model rocket flying. Recovery is accomplished using a colorful 12 inch, preassembled parachute for soft landings. Includes an adapter that allows you to quickly convert from E to D engine power.

    Eliminator XL Launch Set

    Estes Eliminator XL Launch Set

    The Estes Eliminator XL rocket stands 44 inches tall. Assembly is easy, just twist the sections together. The Eliminator XL is ready to launch in just a few minutes.

    This set includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. A 3/16-inch Maxi Launch Rod is also included.

    Engines, batteries, and other supplies are not included.

    Fat Jax Model Rocket Kit

    Estes Fat Jax Model Rocket Kit

    The Estes Fat Jax is a cool, little ready-to-fly rocket that flies using mini-engines.

    Firehawk Model Rocket Kit

    Estes Firehawk Model Rocket Kit

    The Estes Firehawk is a four-finned, easy-to-assemble rocket which requires no painting. It flies on mini-engines.

    Firestorm Model Rocket Kit

    Estes Firestorm Model Rocket Kit

    The Estes Firestorm is an "Almost Ready-to-Fly" (ARTF) model rocket featuring uniquely colored plastic fins and nose cone. Just slip the fins into the fin can and the rocket is ready to prep for flight.

    Add the BT-60 Booster accessory (sold separately) to fly the Firestorm as a two-stage rocket.

    Firestreak SST Model Rocket Kit

    Estes Firestreak SST Model Rocket Kit

    The Firestreak SST is a "Simple Snap-Together" model rocket kit. About 10" long, this plastic kit can be assembled and ready to fly in 15 minutes.

    Flying Colors Model Rocket Kit

    Estes Flying Colors Model Rocket Kit

    Este's Flying Colors model rocket sports a fun color scheme. It's almost fully assembled when you get it.  Just slip the fins into the fin can, and it's ready to prep for launch. Add the BT-60 Booster accessory (sold separately) to convert the Flying Colors to a multi-stage rocket.

    Gnome Model Rocket Kit

    Estes Gnome Model Rocket Kit

    The Gnome is just a little over 10 inches tall with a shiny chrome body tube and blue nose cone and fins. This great-looking, mini-engine powered cloud chaser can reach altitudes of well over 800 feet. Recovery is fast and reliable with its fluorescent streamer.

    The Gnome is one of the Estes E2X (Easy to Assemble) series of kits and features a single piece, chrome wrapped body tube, a bright blue precolored fin unit, nose cone, and upper launch lug ring. The rocket takes about 30 minutes to build and is finished off with a colorful, easy-to-apply self-stick decal. With its simple assembly and precolored parts, it's an excellent choice for the first time rocketeer.

    Helicat Launch Set

    Estes Helicat Launch Set

    In just a few minutes you will have this rocket ready for the launch pad. The Estes HeliCAT features a unique helicopter nose cone recovery that is a blast to watch land.

    You will need glue and plastic cement, but assembly of the HeliCAT is easy and no painting is necessary. Powered by standard Estes engines, this quickly built rocket reaches heights of over 500 feet.

    This is a launch set which includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. Batteries, rocket motors, and other launch supplies are not included.

    Mammoth Model Rocket Kit

    Estes Mammoth Model Rocket Kit

    The Estes Pro Series II Mammoth is a big rocket.  Almost five feet tall, the Mammoth is easy to build and features a metallic body tube. Recovery is by a 24-inch red nylon parachute.

    Add the PS II Booster (sold separately) for two-stage flights.

    Nike Smoke Pro Series II Scale Model Rocket Kit

    Estes Nike Smoke Pro Series II Scale Model Rocket Kit

    A member of Estes' Pro Series II line of model rockets, the Nike Smoke is a 1/5.5 scale model of the NASA rocket used for upper-atmosphere research. Pro Series II rockets require a launch pad with a 1/4" launch rod.

    No.2 Skywriter Model Rocket Kit

    Estes No.2 Skywriter Model Rocket Kit

    This fun No. 2 Skywriter rocket looks like a wooden pencil. The Skywriter includes colored body tubes, fins, and nose cone, so assembly is quick and easy.

    Puma RTF Model Rocket Kit

    Estes Puma RTF Model Rocket Kit

    The mini-engine Estes Puma can reach altitudes of well over 800 feet . Recovery is reliable with its fluorescent streamer for easy tracking!

    The Estes Puma is a brightly colored, ready to fly, mini engine powered speedster. The slender, long lines of this rocket provide the beginning or seasoned rocketeer a high intensity model rocket flying experience! The Puma is just a little over 10 inches tall and is factory assembled and decorated. This mini engine powered cloud chaser can reach altitudes of well over 800 feet. Recovery is safe and reliable with its fluorescent colored streamer for easy tracking after a ballistic flight! The Puma is high performance model rocket flying fun of the easiest kind. It's a great rocket to take to the flying field when you are short on time, but want to fly! For cloud scratching performance, get the Puma ready to fly rocket.

    Red Rider Model Rocket Kit

    Estes Red Rider Model Rocket Kit

    Red Rider is another of Este's new almost-ready-to-fly rockets. Assembly consists of little more than sliding the fins into the fin can. The Red Rider is a single-stage rocket, but you can add the BT-55 Booster accessory (sold separately) to convert it to a two-stage rocket.

    Rocket Red Crayon Model Rocket Kit

    Estes Rocket Red Crayon Model Rocket Kit

    Rocket Red is a RTF crayon-themed rocket. It stands almost 20" tall and features a twist-on fin section.

    Rookie Model Rocket Kit

    Estes Rookie Model Rocket Kit

    There is nothing "rookie" about the Estes Rookie rocket. Quick to assembe and a high flier, the Rookie is powered by standard engines and can reach heights over 500 feet. And if you want to go really high, add the BT-60 Booster Accessory (sold separately) and a D12-0 booster engine then watch this rocket soar.

    Shuttle Xpress Model Rocket Kit

    Estes Shuttle Xpress Model Rocket Kit

    The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.

    The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.

    After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!

    The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.

    Sky Twister Model Rocket Kit

    Estes Sky Twister Model Rocket Kit

    The easy-to-assemble Sky Twister features a nose cone with helicopter recovery. The nose cone deploys rotor blades and spins back to earth while the rest of the rocket returns under a parachute.

    Starbase Starcruiser Model Rocket Kit (OOP)

    Estes Starbase Starcruiser Model Rocket Kit (OOP)

    The Starbase Starcruiser was produced by Estes in 1995 specifically for the US Department of Defense's STARBASE youth program.

    STARBASE is an educational program, sponsored by the Office of the Assistant Secretary of Defense for Reserve Affairs. STARBASE students participate in challenging "hands-on, mind-on" activities in Science, Technology, Engineering, and Math.

    This kit is still in the original, plain plastic bag, packaging. It features a plastic fin set and a large, self-stick decal sheet.

    Trajector Model Rocket Kit

    Estes Trajector Model Rocket Kit

    With a futuristic rocketship design, the Trajector is an easy-to-build entry in Estes's Pro Series II series of larger model rockets.  Flying on 29mm E and F motors, the Trajector features a plastic nose cone, plastic fins, self-stick decals, a screw-on motor retainer and an 18" nylon parachute. The Pro Series II E2X Booster (not included) may be used with the Trajector to create a two-stage rocket that can reach more than 3000' in altitude.

    Crayon Model Rocket Kit

    FlisKits Crayon Model Rocket Kit

    Everybody remembers coloring when they were a child and many of us still color, be it with crayons, color pencils, markers or just our imagination. The FlisKits Micromaxx Crayon rocket kit takes the universally recognized crayon shape and turns it into a model rocket, ready to color your imagination and the skies above your next launch!

    These tiny, near 1:1 scale replica's of actual crayons will tickle the kid inside you as you construct and then fly these little wonders. Standing less than 5 1/4" tall and only 3/8" in diameter, these little guys make the most of the small Micromaxx motors. Constructed from conventional model rocket materials, the kit comes with a custom, laser-printed construction paper body wrap which adds to the authentic look of these Crayon rockets. The rockets feature clear plastic fins and a removable fin unit. Sitting on the table, without its fin unit, you would be tempted to pick one up and begin coloring your favorite picture.

    The kit includes a custom turned balsa nose cone, body tubes, centering rings, engine block, launch lug, and fin stock. Even a Kevlar shock cord and a mylar red and silver streamer are provided.

    This model is rated as a Skill Level 2 model. Previous model building experience is needed to successfully build and fly the FlisKits Micromaxx Crayon rocket kit.

    Kit colors will vary.

    Tomahawk Model Rocket Kit (OOP)

    MPC Tomahawk Model Rocket Kit (OOP)

    MPC last produced the Tomahawk kit in 1978. Still sealed in the original packaging, this kit is a 1/12 scale flying model of the TE-416 Tomahawk sounding rocket produced by Thiokol in the early 1960s for the Sandia National Laboratory.

    USS Enterprise Model Rocket Kit

    MPC USS Enterprise Model Rocket Kit

    MPC's USS Enterprise rocket is easy to build with two pre-decorated body tubes.  It is 28.71" (72.9cm) long with a diameter of 1.58" (40mm) and uses standard engines from Estes and Quest. The kit includes self-stick decals and a special parachute.

    Viper Model Rocket Kit Bulk Pack (12)

    Quest Aerospace Viper Model Rocket Kit Bulk Pack (12)

    This is a bulk package which includes kits to build twelve (12) rockets.

    The Viper model rocket kit has a plastic fin unit which makes it easy to build. Featuring parachute recovery, the Viper is fun to build and even more fun to fly.

    Colors may vary.



Copyright © 2018 JonRocket.com LLC