Your Shopping Cart is empty

Our Black Friday / Cyber Monday Sale is active now through Monday, November 30. The specials are only available on in-stock items and update each evening based on remaining stock.

 

Please note that ground shipments are taking longer than usual right now. If you order motors, spray paint, or anything else that must be shipped by ground, please be patient.

Weight (oz) in range 3.45...3.55

    Black Brant VB Model Rocket Kit

    Aerospace Speciality Products Black Brant VB Model Rocket Kit (3.5000)

    The Black Brant VB is a Canadian sounding rocket designed to launch payloads to an altitude of 200 miles. First flown in 1965, over 180 have flown from launch sites all over the world.

    The Black Brant VB has long been a favorite of scale modelers. ASP's scale kit is over two and a half feet tall and features a balsa nose cone, laser-cut basswood fins, water-slide decals and quick-change engine hook. Designed primarily for 24mm C, D, and E engines, it can also be flown on selected 18mm engines with an adapter (not included). A bright metallic parachute returns it to the ground for flight after flight.

    RX-250-LPN (24mm) Model Rocket Kit

    Aerospace Speciality Products RX-250-LPN (24mm) Model Rocket Kit (3.5000)

    ASP's RX-250-LPN is a flying scale model of the Indonesian sounding rocket. The RX series of rockets was first developed in the mid 1980s. Designed to lift scientific instruments to an altitude of 70 km, the real RX-250-LPN was flown between the years of 1987 and 2007.

    This scale kit is nearly two and a half feet tall and features a balsa nose cone, laser-cut basswood fins, water-slide decals, and a quick-change engine hook.

    Designed primarily for 24mm C, D & E engines, it can also be flown on selected 18mm engines with an adapter (not included). A bright metallic parachute returns it to the ground for flight after flight.

    Green Eggs Model Rocket Kit

    Estes Green Eggs Model Rocket Kit (3.5000)

    Green Eggs is an egg-lofting rocket designed for Estes C11 and D engines. The clear payload is big enough to carry two eggs (with a D12-3 motor). The swept fins allow the rocket to stand by itself.

    The main body tube and clear payload section are both the same diameter allowing a standard launch lug to be glued into place with no awkward stand-off needed.

    Through-The-Wall (TTW) thick balsa fins make for easier alignment and super strength. All these features add up to less time building and more time to perform experiments with your "eggstronauts."

    Hi-Flier XL Model Rocket Kit

    Estes Hi-Flier XL Model Rocket Kit (3.5000)

    The Hi-Flier XL is an upsized replica of the #1 selling Estes Hi-Flier! Powered by C11, D and E engines, this sporty rocket can reach amazing heights.

    Magician Model Rocket Kit

    Estes Magician Model Rocket Kit (3.5000)

    Conjure up some special space magic with the Magician! No tricks up anyone's sleeve here, just a super high performance payload model rocket. The talented Estes rocket shop designers have spun their magic to create an enormous, supersized payload rocket. The Magician can handle all the power you put in the motor tube to send it on a magical mystery tourof the atmospheric kind.

    This sorcerer stands an impressive 33.5 inches tall and has a clear payload section. You can launch just about anything into space. Well, not quite anything, but its sure to hold a small race car, an action figure, or whatever your imagination can dream up. If it fits into the payload section, launch it.

    A Skill Level 3 rocket, this kit comes with a high quality balsa nose cone, laser cut balsa fins and waterslide decals. Designed to be flown on D or E engines, this rocket will scream off the launch pad to heights over 1,600 feet. Getting this illusionist back to earth is magically accomplished on a colorful pre-assembled 18 inch parachute.

    Mix-n-Match 50 Model Rocket Kit

    Estes Mix-n-Match 50 Model Rocket Kit (3.5000)

    The Mix-n-Match 50 set includes parts to build three colorful rockets. All parts are pre-colored, so no painting is required. Two sheets of self-stick decals are included.

    The Mix-n-Match 50 includes BT-50 (0.976 inch diameter) parts:

    • Three nose cones and nose cone inserts
    • Six pre-colored BT-50 (.98 in diameter) body tubes
    • Three body tube connecters
    • Three fin can units
    • Twelve fins in three different styles
    • Three launch lugs and clear reinforcements
    • Three shock cords
    • Three pre-assembled parachutes
    • Two self-stick decal sheets
    Photon Probe Model Rocket Kit

    Estes Photon Probe Model Rocket Kit (3.4500)

    The Estes Photon Probe is a "Classic Series" re-issue of a futuristic kit which was originally released in 1991.

    Aster Military Missile Model Rocket Kit

    Rocketarium Aster Military Missile Model Rocket Kit (3.5000)

    The Aster missile family is generally flown in a two-stage configuration. The Aster 15 and Aster 30 missiles are identical, other than the size of the booster. The booster size determines the missile's range. The highly-agile Aster was designed to intercept next-generation supersonic anti-ship missiles.

    Rocketarium's semi-scale kit is a single-stage model of the sustainer stage of the ground-to-air Aster missile which flies on D to F engines.



Copyright © 2020 JonRocket.com LLC