Your Shopping Cart is empty

Recovery = Parachute

    Aerobee 100 Junior Model Rocket Kit

    Aerospace Speciality Products Aerobee 100 Junior Model Rocket Kit

    The Aerobee 100, or Aerobee Junior, was first flown early in 1958. This vehicle was designed by Aerojet General to be an inexpensive rocket to fly payloads of 50 - 100 pounds up to 90 miles. Most of the 20 produced used a solid-fuel booster, but two were actually sea-launched as a single-stage rocket (which makes this model eligible for NAR Scale competition).

    Aerobee rockets have long been a favorite of scale modelers. ASP's kit is 1.89" in diameter and about 2 1/2 feet tall and features through-the-wall laser-cut plywood fins (with optional balsa laminations), big balsa nose cone, pre-rounded basswood conduits, steel cable shock cord mount and water slide decal. Makes a great intro to mid-power rocketry and flies fantastic (and high!) on 29mm F and G engines!

    A parachute is not included with this kit. We recommend an 18" or 24" nylon parachute.

    This kit has an accurate scale outline, but is also a fairly easy build.

    Aerobee 300 Model Rocket Kit

    Aerospace Speciality Products Aerobee 300 Model Rocket Kit

    The Aerobee 300, or "Spaerobee", was first flown in 1958. Eleven were flown by the Air Force and Navy with the last taking flight in 1965. The Aerobee series of rockets was designed by Aerojet General and is considered a descendant of the WAC Corporal.

    Aerobee rockets have long been a favorite of scale modelers, and the Aerobee 300 has been an especially popular prototype. ASP's kit is 1.89" in diameter and over three feet tall! The kit features through-the-wall laser-cut plywood fins (with optional balsa laminations), balsa nose cone and transition, pre-rounded basswood conduits, steel cable shock cord mount and water slide and self-adhesive decals.

    Makes a great intro to mid-power rocketry and flies fantastic (and high!) on 29mm F and G engines! This model can reach some impressive altitudes, especially with G engines. The kit has an accurate scale outline but is also a fairly easy build that leaves room for the modeler to add additional details if desired.

    A parachute is not included with this kit. We recommend a 24" nylon parachute.

    Black Brant IV Model Rocket Kit

    Aerospace Speciality Products Black Brant IV Model Rocket Kit

    The Black Brant IV is a Canadian sounding rocket designed to launch payloads to over 500 miles high. First flown in 1964, the two-stage rocket was used into the 1980's. Over fifty flew from launch sites all over the world, including Peru, Spain, Norway, Greenland, and the U.S. among others.

    ASP's single-stage scale kit is nearly three feet tall and features a balsa transition and hard balsa nose cone, laser-cut basswood fins, water-slide and self-adhesive decals, and a quick-change engine hook. You can fly this model on a wide range of engines, with fairly low altitudes on a C, but practically out-of-sight flights on an E! Designed primarily for 24mm C, D & E engines, it can also be flown on selected 18mm engines with an adapter (not included). A bright metallic parachute returns it to the ground for flight after flight.

    Corporal (18mm) Model Rocket Kit

    Aerospace Speciality Products Corporal (18mm) Model Rocket Kit

    The Corporal was the first guided missile put into use by the U. S. Army. Originally designed as a test vehicle to study the problems associated with long range rockets, the Corporal was later turned into a tactical battlefield missile capable of carrying either a conventional or nuclear warhead. The first test vehicle was flown in 1947. Full production vehicles made their appearance in the summer of 1952. The basic design saw some modifications until the Corporal was retired in 1964.

    ASP's model features a balsa nose cone and balsa conduits, basswood fins, and decals.

    Corporal (24mm) Model Rocket Kit

    Aerospace Speciality Products Corporal (24mm) Model Rocket Kit

    The Corporal was the first guided missile put into use by the U. S. Army. Originally designed as a test vehicle to study the problems associated with long range rockets, the Corporal was later turned into a tactical battlefield missile capable of carrying either a conventional or nuclear warhead. The first test vehicle was flown in 1947. Full production vehicles made their appearance in the summer of 1952. The basic design saw some modifications until the Corporal was retired in 1964.

    ASP's model features a balsa nose cone and balsa conduits, basswood fins, and decals. Designed to fly on 24mm C, D, and E motors, this single-stage rocket can also fly on select 18mm using an adapter (not included).

    With the the included decals, no masking is required when painting this impressive model.

    D-Region Tomahawk (29mm) Rocket Kit

    Aerospace Speciality Products D-Region Tomahawk (29mm) Rocket Kit

    The D-Region Tomahawk was flown early in 1968. This vehicle was intended to fly to the D layer of the ionosphere, thus the name "D-Region". Tomahawk rockets are used to this day as the upper stage of many sounding rocket flights.

    The D-Region Tomahawk has long been a favorite of scale modelers. This new kit from ASP is over three feet tall and features through-the-wall laser-cut plywood fins, a balsa nose cone, a steel cable shock cord mount, and self-adhesive decals.

    This kit makes a great intro to mid-power rocketry and flies fantastic on 29mm F and G engines. ASP's kit provides an accurate scale outline, but is fairly easy to build leaving room for the modeler to add additional details if desired.

    A parachute is not included with this kit. A 24" nylon 'chute is recommeded.

    Eggstravaganza 18 Platinum Edition Egglofter Model Rocket Kit

    Aerospace Speciality Products Eggstravaganza 18 Platinum Edition Egglofter Model Rocket Kit

    The newest version of ASP's popular and contest-winning Eggstravaganza series of Egglofter kits features an aerodynamic and lightweight clear plastic egg cone, a shock cord made of Kevlar and elastic, and laser-cut G10 fiberglass fins. The tapered silver shroud reduces drag while giving plenty of room for a parachute.

    These kits have been used extensively in NAR competition and have helped modelers bring home many trophies. This egg lofter can be flown in either Altitude or Duration events. The egg cone has a section in the base that will fit some smaller altimeters and also comes with the option of using a sponge-like foam egg protector that conforms to the inside of the cone and to the egg. The egg protector gives superior protection against breaking the egg and also makes mating the two pieces of the egg cone much easier.

    Eggstravaganza 24 Platinum Edition Egglofter Model Rocket Kit

    Aerospace Speciality Products Eggstravaganza 24 Platinum Edition Egglofter Model Rocket Kit

    The newest version of ASP's popular and contest-winning Eggstravaganza series of Egglofter kits features an aerodynamic and lightweight clear plastic egg cone, a shock cord made of Kevlar and elastic, and laser-cut G10 fiberglass fins. The tapered silver shroud reduces drag while giving plenty of room for a parachute.

    These kits have been used extensively in NAR competition and have helped modelers bring home many trophies. This egg lofter can be flown in either Altitude or Duration events. The egg cone has a section in the base that will fit some smaller altimeters and also comes with the option of using a sponge-like foam egg protector that conforms to the inside of the cone and to the egg. The egg protector gives superior protection against breaking the egg and also makes mating the two pieces of the egg cone much easier.

    Kappa-7-1 (18mm) Model Rocket Kit

    Aerospace Speciality Products Kappa-7-1 (18mm) Model Rocket Kit

    The Kappa-7 was designed as a booster for Japan's later Kappa-8 and Kappa-9 rockets as well as being used as a single-stage sounding rocket. It was determined, however, that the vehicle was unsuitable as a single-stage rocket. The lone Kappa-7 flight was made on November 18, 1959 to confirm the motor's suitability as a booster. 

    ASP's model of one of Japan's early sounding rockets makes a great beginner's kit. Capable of flying on a wide range of engines, this great looking and great flying model can be flown on practically any size field.

    Kappa-9M (18mm) Model Rocket Kit

    Aerospace Speciality Products Kappa-9M (18mm) Model Rocket Kit

    The Kappa 9M is a two-stage Japanese sounding rocket. The first Kappa 9M (K-9M-1) was flown on November 12, 1962.

    ASP's single-stage scale model features basswood fins, balsa nose cone, balsa transition, and decals. This is a neat looking model that's also fairly easy to build.

    Kappa-9M (24mm or 3x18mm Cluster) Model Rocket Kit

    Aerospace Speciality Products Kappa-9M (24mm or 3x18mm Cluster) Model Rocket Kit

    The Kappa 9M is a two-stage Japanese sounding rocket. The first Kappa 9M (K-9M-1) was flown on November 12, 1962.

    Impressive on display as well as in the air, this kit features basswood fins, a balsa nose cone, and balsa transition, and decal. This big (over 3 1/2 feet tall) model is a can be built to fly on a cluster of three 18mm motors or a single 24mm motor.

    Neo Mini Model Rocket Kit

    Aerospace Speciality Products Neo Mini Model Rocket Kit

    ASP's Neo Mini is a great beginner's kit. Easy to build and fly, the Neo Mini is ideal for use in school and other group settings. Designed with the beginner in mind, the Neo Minii is also a fun sport flier for modelers of any experience level.

    Features laser-cut balsa fins, balsa nose cone, quick-change engine hook, and parachute recovery. The Neo Mini flies on economical 13mm "Mini" engines.

    Neo Standard Model Rocket Kit

    Aerospace Speciality Products Neo Standard Model Rocket Kit

    ASP's Neo Standard is a great beginner's kit. Easy to build and fly, the Neo Standard is ideal for use in school and other group settings. Designed with the beginner in mind, the Neo Standard is also a fun sport flier for modelers of any experience level.

    Features laser-cut balsa fins, balsa nose cone, quick-change engine hook, and parachute recovery. The Neo Standard flies on standard 18mm engines.

    Not So Stubby (18mm) Model Rocket Kit

    Aerospace Speciality Products Not So Stubby (18mm) Model Rocket Kit

    The bigger brother of ASP's Stubby, the "Not So Stubby" is a fun, easy to build model which is ideal for flying on any size field. Like its little brother, this kit is designed with the beginner in mind, but also is a great sport flier for the more experienced modeler.

    Features laser-cut balsa fins, a balsa nose cone, quick change engine hook, and parachute recovery, the Not So Stubbyflies on easy to find 18mm A, B or C engines.

    RAM B (18mm) Model Rocket Kit

    Aerospace Speciality Products RAM B (18mm) Model Rocket Kit

    The RAM ("Radio Attenuation Measurement") B was a three-stage rocket designed to study communications during reentry after a lunar voyage.

    ASP's single-stage "Fun Scale" model of the RAM B captures the general apperance of the real vehicle, yet is easy enough for the novice modeler. Includes trim tape and self-adhesive trim material to simplify painting and detailing.

    Sandia Sandhawk (29mm) Rocket Kit

    Aerospace Speciality Products Sandia Sandhawk (29mm) Rocket Kit

    The Sandia Sandhawk has long been a favorite of scale modelers. The Sandia Sandhawk was developed as an upper stage for sounding rocket systems. The Sandhawk flew three times as a single-stage rocket between 1966 and 1974.

    ASP's new kit is over 3 1/2 feet tall and features through-the-wall laser-cut plywood fins, a balsa nose cone, wire antennas, a steel cable shock cord mount, and self-adhesive decals. The Sandia Sandhawk kit is a great intro to mid-power rocketry and flies fantastic on 29mm F and G engines. This kit provides an accurate scale outline, but is fairly easy to build and leaves room for the modeler to add additional details if desired.

    A parachute is not included with this kit. A 24" nylon 'chute is recommended.

    Sky-Ferry (24mm) Model Rocket Kit

    Aerospace Speciality Products Sky-Ferry (24mm) Model Rocket Kit

    ASP's Sky-Ferry is a big (over 2 1/2 feet tall!), easy-to-build model rocket. The Sky-Ferry makes a great first or second rocket kit. Designed with the beginner in mind, it's also a great sport flier for the more experienced modeler.

    The Sky-Ferry features balsa fins, a balsa nose cone, a big payload section (it will hold many commercial electronics), a quick change engine hook, and a bright parachute for recovery. Designed to fly primarily on 24mm engines, it can also fly on 18mm engines with an adapter (not included).

    Skylark Model Rocket Kit

    Aerospace Speciality Products Skylark Model Rocket Kit

    The Skylark was a British sounding rocket originally designed to be used for experiments during the International Geophysical Year. The first single-stage Skylark (as depicted by this model) flew on February 19, 1957, and reached an altitude of eight miles. Later Skylarks took scientific payloads to altitudes of over 100 miles.

    This scale kit features laser-cut balsa fins, a balsa nose cone, water-slide decals, a quick-change engine hook, and parachute recovery. The ASP Skylark flies great on 13mm mini-motors.

    Sonda II B (18mm) Model Rocket Kit

    Aerospace Speciality Products Sonda II B (18mm) Model Rocket Kit

    The Sonda II B is the largest of Brazil's series of Sonda II sounding rockets. The Sonda II was first flown during the early 1970s and continues in use today. 

    Ease of construction and painting makes ASP's model of the Brazilian sounding rocket a great first scale kit.

    Stretch Stubby (18mm) Model Rocket Kit

    Aerospace Speciality Products Stretch Stubby (18mm) Model Rocket Kit

    The Stretch Stubby is ASP's big brother of their Stubby and the Not So Stubby kits. This fun, easy-to-build model features a big payload section.

    Designed wth the beginner in mind, this rocket makes a great first or second rocket kit.

    The Stretch Stubby features laser-cut balsa fins, a balsa nose cone, a quick change engine hook, a payload section (big enough to hold many commercial electronics), and a bright parachute for recovery.

    Stubby (13mm) Model Rocket Kit

    Aerospace Speciality Products Stubby (13mm) Model Rocket Kit

    ASP's Stubby is a cute, fun, and easy to build model. It is ideal for flying on small fields and makes a great first or second rocket kit.

    Designed with the beginner in mind, The Stubby is also a great sport flier for the more experienced modeler. Designed to fly on economical 13mm "Min Engines," ASP's Stubby features laser-cut balsa fins, a balsa nose cone, quick change engine hook, and a bright parachute for recovery.

    Super Loki Dart (24mm) Model Rocket Kit

    Aerospace Speciality Products Super Loki Dart (24mm) Model Rocket Kit

    The Super Loki-Dart is one of NASA's workhorses for lofting small payloads. Radar chaff, inflatable spheres, and radiosondes for meteorological data are some of the payloads sent aloft by this vehicle.

    ASP's scale model is both fun and challenging to build. It includes a full decal set. At 3 1/2 feet tall, this is an impressive model that always attracts attention. Rockets built from this kit have placed in both regional and national competitions.

    Tall Boy (24mm) Model Rocket Kit

    Aerospace Speciality Products Tall Boy (24mm) Model Rocket Kit

    ASP's Tall Boy is designed so that you can fly it in one of four configurations. This mean machine's modular design makes it easy to transport. The configuration is easily changed in minutes at the launch site.

    In the Extra Long configuration, the rocket is over 10 feet tall and uses 24mm D and E motors. The Short configurations can be flown using less-expensive 18mm motors using an adapter. (The adapter is not included.)

    This kit features Aerospace Speciality Products' usual top-quality components, outstanding instructions, a balsa wood nose cone, laser-cut balsa fins, and two parachutes.

    That Tube Rocket (29mm) Model Rocket Kit

    Aerospace Speciality Products That Tube Rocket (29mm) Model Rocket Kit

    This larger version of ASP's That Tube Rocket flies on 29mm F and G motors.

    ASP's That Tube Rocket flies without the use of standard fins. Very easy to build, That Tube Rocket includes a quick-change engine hook that makes it easy to fly over and over. Features ASP's usual top-quality components and outstanding instructions.

    Recommended Parachute (not included): 24" to 36" Nylon (regular or thin mil, 30" or 36" is best for most flights)

    V-2 (18mm) Model Rocket Kit

    Aerospace Speciality Products V-2 (18mm) Model Rocket Kit

    The V-2 ("Vengeance Weapon 2") is perhaps the most famous, and certainly the most infamous, rocket ever built. Designed by Werner von Braun for the Nazi war effort during WWII, the V-2 was the world's first large liquid-fueled rocket. After the war, many captured V-2s were flown by the U.S. as well as the Soviet Union. Despite its horrific inception as a weapon of destruction, the V-2 was the forerunner of all the large liquid-fuel rockets which were to follow.

    Featuring a balsa boattail, balsa nose cone, and laser-cut basswood fins, ASP's 11 1/4" tall model is true to scale and flies on standard A thru C motors.

    Versi - Loader 2 Model Rocket Kit

    Aerospace Speciality Products Versi - Loader 2 Model Rocket Kit

    ASP's new version of the popular Versi - Loader kit has been updated to conform to the new NAR payload rules. This easy-to-build 18mm engine-powered kit features a balsa nose cone and bulkhead, laser-cut balsa fins, and a complete payload kit. The Versi - Loader 2 can be flown either single-stage or two-stage. Although designed primarily as a payload model, the Versi - Loader 2 is also capable of being used as a Parachute or Streamer Duration model in the higher impulse events (B & up) as well as in Altitude events, or just for fun as a high-flying sport model. Includes a NAR-Style payload.

    WAC Corporal (18mm) Model Rocket Kit

    Aerospace Speciality Products WAC Corporal (18mm) Model Rocket Kit

    WAC Corporal (24mm) Model Rocket Kit

    Aerospace Speciality Products WAC Corporal (24mm) Model Rocket Kit

    The WAC Corporal was the United States first sounding rocket. Seventeen WAC and WAC B rockets were flown from 1945 to 1947. The WAC was launched with the aid of the Tiny Tim solid propellant booster. After the booster burned out it fell away and the liquid fuel propelled sustainer stage continued its upward flight.

    ASP's 24mm WAC Corporal is a single-stage "Fun Scale" model of the historic rocket. Designed to fly on D and E motors, it's still light enough to fly on selected 18mm motors with an adapter (not included).

    WAC Corporal (29/38mm) Model Rocket Kit

    Aerospace Speciality Products WAC Corporal (29/38mm) Model Rocket Kit

    The WAC Corporal was the United States first sounding rocket. Seventeen WAC and WAC B rockets were flown from 1945 to 1947. The WAC was launched with the aid of the Tiny Tim solid propellant booster. After the booster burned out, it fell away and the liquid fuel propelled sustainer stage continued its upward flight.

    At 2.6" in diameter and over 3 1/2 feet tall, ASP's 38mm, single-stage version of the ever-popular WAC Corporal will be a welcome addition to your rocket fleet. A custom-turned hard balsa nose cone and boattail, laminated, easily-shaped fins along with a plastic and wood conduit make this a model that looks and flies like a dream. This model has a main 38mm engine mount. An adapter is included to fly 29mm engines.

    A 24" or 30" nylon parachute (not included) is recommended.

    WAC Corporal (29mm) Rocket Kit

    Aerospace Speciality Products WAC Corporal (29mm) Rocket Kit

    The WAC Corporal was the United States first sounding rocket. Seventeen WAC and WAC B rockets were flown from 1945 to 1947. The WAC was launched with the aid of the Tiny Tim solid propellant booster. After the booster burned out, it fell away and the liquid fuel propelled sustainer stage continued its upward flight.

    ASP's new WAC kit is 1.89" in diameter and just over 2 1/2 feet tall. It comes with a hard balsa nose cone and a balsa boattail, and pre-rounded basswood conduit. This kit makes a great intro to mid-power rocketry and flies fantastic on 29mm F and G engines.

    A parachute is not included. A 24" nylon 'chute is recommended.

    WAC Corporal (Two Stage 24mm to 18mm) Model Rocket Kit

    Aerospace Speciality Products WAC Corporal (Two Stage 24mm to 18mm) Model Rocket Kit

    This detailed model features a balsa boattail, hard balsa nose cone, and laser-cut balsa fins. Using the "Pass - Port" staging method, a D12-0 booster fires an 18mm upper stage motor for impressive, two-stage flights. The upper stage may also be flown as a single stage model. Recommended for the advanced modeler.

    Way Two High (18/24mm) Model Rocket Kit

    Aerospace Speciality Products Way Two High (18/24mm) Model Rocket Kit

    The Way Too High is an easy to build two-stage kit. The booster section can be built in either of two styles. The kit features laser-cut balsa fins, a payload section, and a balsa wood nose cone.

    The Way Too High can be built to use either 18mm or 24mm engines.

    Freestyle Model Rocket Kit

    Custom Rocket Freestyle Model Rocket Kit

    Colorful graphics set the Custom Rocket Freestyle kit apart from the rest. The kit includes an injection-molded nose cone, quick-release engine mount, laser-cut balsa fins, a 12" parachute and self-adhesive decals. Flights to 750 feet.

    Galaxy Model Rocket Kit

    Custom Rocket Galaxy Model Rocket Kit

    The Galaxy is a two-stage kit featuring a blow-molded nose cone, die-cut balsa fins, large pressure-sensitive decals, and an 18" parachute. Excellent flights to 1000 feet.

    Raven Model Rocket Kit

    Custom Rocket Raven Model Rocket Kit

    The Raven is a scale-like, surface-to-air missile. The kit features an injection-molded plastic nose cone, die-cut balsa fins, 12" parachute, precision water-slide decals, and a quick-release engine mount. Flights over 1,000 feet are possible with a C6-7 motor.

    S.L.V. Model Rocket Kit

    Custom Rocket S.L.V. Model Rocket Kit

    The SLV ("Satellite Launch Vehicle) provides slow, impressivelift-offs that look so real. The kit features an injection-molded plastic nose cone, six die-cut balsa fins, a 12" parachute, and self-adhesive decals. Flights of over 750 feet.

    Scavenger Model Rocket Kit

    Custom Rocket Scavenger Model Rocket Kit

    The Custom Scavenger is a D-powered rocket with big decals. Easy to build and fly, it makes a great demonstration flyer. The kit features a blow-molded plastic nose cone, die-cut balsa fins, 18" parachute recovery, pressure sensitive decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a D12-5 motor.

    Serin Model Rocket Kit

    Custom Rocket Serin Model Rocket Kit

    The Serin is a scale-like surface-to-air missile. It looks realistic on the launch pad and in the air. Easy to build and fly, it makes a great beginner kit. The kit features a blow molded plastic nose cone, die-cut balsa fins, 12" parachute, precision water-slide decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.

    Skybird Model Rocket Kit

    Custom Rocket Skybird Model Rocket Kit

    The Skybird includes a transparent red payload tube to carry an insect or other small experiment. Easy to build and fly, the kit is great for a beginner. The Skybird features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, pressure sensitive decals, and a quick-release engine mount Flights of over 1000 feet are possible with a C6-7 motor

    Solar Explorer Model Rocket Kit

    Custom Rocket Solar Explorer Model Rocket Kit

    The Solar Explorer is a deep space probe searching for habitable planets. The kit features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, unique self-adhesive decals, and a quick-release engine mount. Flights to 700 feet.

    Sport Model Rocket Kit

    Custom Rocket Sport Model Rocket Kit

    The super-long Sport from Custom Rocketry provides slow, realistic lift-offs. Easy to build and fly, this almost 2 1/2-foot tall rocket makes a great beginner kit. Features include an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, a pressure sensitive decal, and a quick-release engine mount. Flights of over 750 feet are possible on a C6-5 motor.

    Vanishing Point Model Rocket Kit

    Custom Rocket Vanishing Point Model Rocket Kit

    The Vanishing Point is a high flying two stage model. The kit features an injection-molded nose cone, die-cut balsa fins, 12" parachute, and a big self-adhesive decal. Flights of over 2500 feet are possible.

    Saturn V Model Rocket Kit

    Dr. Zooch Saturn V Model Rocket Kit

    Dr. Zooch Rockets has produced a detailed "ant-scale" flying model of the rocket which took astronauts to the moon.

    Designed by the mad scientist Dr Zooch this semi-scale flying model of the mighty Saturn V moon rocket is designed to excite the imagination and honor our history of spaceflight. Dr. Zooch's Saturn V includes detailed paper wraps that glue onto the model and a full set of decals. The F-1 engines are modelled and they do not have to be removed for flight.

    SpaceX Falcon Heavy Improved Model Rocket Kit

    Dr. Zooch SpaceX Falcon Heavy Improved Model Rocket Kit

    Dr. Zooch's scale flying model of the SpaceX Falcon 9 Heavy includes Dr. Zooch's "flame fins" to ensure stable flights on C6-3 motors.

    AGM-57X Heatseeker Model Rocket Kit

    Estes AGM-57X Heatseeker Model Rocket Kit

    This scale-like model rocket kit is easy-to-assemble with no painting required.

    Airborne Surveillance Missile Model Rocket Kit

    Estes Airborne Surveillance Missile Model Rocket Kit

    Estes introduced the Airborne Surveillance Missile kit in the early 1980s. Now they've brought back the military-style rocket. Flying on economical mini-engines, the ASM can reach alitudes of 300 feet or more.

    Airwalker Model Rocket Kit

    Estes Airwalker Model Rocket Kit

    This is a "reintro" of the popular Air Walker model rocket kit from Estes. A clear payload section adds to the fun of this rocket. Building remains the same as the original kit and is easy to build no matter what your experience level. Have this rocket on the launch pad in a quick afternoon and enjoy countless launches.

    Almost Ready-To-Fly Saturn V (1:200 Scale) Model Rocket Kit

    Estes Almost Ready-To-Fly Saturn V (1:200 Scale) Model Rocket Kit

    This 1/200th scale model of the mighty Saturn V moon rocket comes mostly assembled and almost ready to fly. Includes a stand, clear fins for light, and a limited-time offer of a free poster.

    This limited-production commemorative 1/200 scale Apollo II Saturn V model is almost 2 feet tall and comes fully assembled with many scale details and markings carefully reproduced for exceptional realism.

    This historical model of the Saturn V is suitable for display or can be launched to celebrate the historic 50th anniversary of landing the first man on the moon!

    Completely assembled with scale details, painting and markings. Includes colorful, pre-assembled 18” parachute for recovery. Saturn V display stand included.

    Need more reason to buy? Look inside your Saturn V box for a special free poster offer from Estes. Created by Aldo Spadoni, this limited edition, 10" x 30" poster will brighten up any space. Get yours while supplies last.

    This scale model rocket looks great as a decorative piece mounted to the included display stand and can also be launched by attaching the included clear fin unit.

    Alpha VI Model Rocket Kit

    Estes Alpha VI Model Rocket Kit

    The Alpha VI is a special limited-edition of the classic Alpha series of rockets. Commemorating the 60th anniversary of Estes, this kit features colorful self-stick decals.

    Apollo 11 Saturn V Model Rocket Kit

    Estes Apollo 11 Saturn V Model Rocket Kit

    In celebration of the 50th anniversary of the first moon landing, Estes has reissued their popular 1/100th scale flying model of the Saturn V.

    Scaled from official NASA drawings, the finished model is 43.25 inches tall and lifts off to about 350 feet on an E30-4 composite motor.

    This kit features precision laser-cut centering rings, a molded Apollo capsule and escape tower, and main engine display nozzles that remove easily for flight. An update for this new kit is two-piece injection molded plastic fins for easier assembly and added durability during flight.

    Estes has included a special "bonus" with this kit!

    Astron Explorer Model Rocket Kit

    Estes Astron Explorer Model Rocket Kit

    Standing more than 42" tall when assembled, this Skill Level 4 kit includes waterslide decals and plastic nose cones.

    Astron Sky Dart II Model Rocket Kit

    Estes Astron Sky Dart II Model Rocket Kit

    Powered by standard engines, expect to be impressed with the glider flight of the Astron Skydart II. Absolutely the coolest glider rocket Estes makes, one minute duration glides are fully possible. Be the first on your block to get this cool rocket.

    Baby Bertha Model Rocket Kit

    Estes Baby Bertha Model Rocket Kit

    The Baby Bertha is a pint-sized version of the classic Big Bertha. At just under 13 inches, the Baby Bertha is about half the size of it's larger cousin. The Baby Bertha kit features laser-cut fins, a plastic nose cone, self-stick decals, and a colorful 12-inch pre-assembled parachute.

    Bandito Model Rocket Kit

    Estes Bandito Model Rocket Kit

    The Estes Bandito is a sporty, easy-to-assemble model rocket kit which flies on mini-engines.

    Big Bertha Model Rocket Kit

    Estes Big Bertha Model Rocket Kit

    The Big Bertha is a classic Estes kit. Designed by Vern Estes himself, this is one of the largest Skill Level 1 rockets. it is a great beginenr's rocket. The Big Bertha is terrific for demonstractions as its large size and steady flights on smaller motors provide slow, realistic lift-offs.

    Big Daddy Model Rocket Kit

    Estes Big Daddy Model Rocket Kit

    The Big Daddy is a modern classic. This beefy rocket flies on 24mm C, D, and E motors.

    Black Brant II Model Rocket Kit

    Estes Black Brant II Model Rocket Kit

    The Estes Black Brant II kit is based on the classic design from the 1990s. Fun to build and exhilarating to fly, this rocket is one of the highest flying model rockets in the Estes scale collection.

    The Black Brant family of sounding rockets was made in Canada in the late 1950s. More than a half century later, highly reliable Black Brant rockets are still carrying scientific payloads to high altitude. The 28 foot long Black Brant II rocket first flew in 1960. It was eventually succeeded by the smaller, but more powerful, Black Brant III.

    A stunning model, the Estes Black Brant II is a 1:13 scale replica of one of the Black Brant II. Standing nearly 25 inches tall, this impressive rocket is loaded with scale details.

    Black Brant III Model Rocket Kit

    Estes Black Brant III Model Rocket Kit

    Estes's Black Brant III is a flying scale model of the primary research vehicle produced by Canada Bristol Aerospace and is an excellent choice for your first scale project. Construction is fairly simple with high-quality parts including laser-cut wood fins, waterslide decals, and a 12 inch parachute for recovery. Great performance and really impressive flights!

    Black Hole Model Rocket Kit

    Estes Black Hole Model Rocket Kit

    One of Estes's series of crayon-inspired rockets, the Black Hole is almost ready to fly. Standing almost 20 inches tall, this rocket goes well over 500 feet.

    Boosted Bertha Model Rocket Kit

    Estes Boosted Bertha Model Rocket Kit

    Estes's Boosted Bertha is a new take on the classic. This two-stage rocket

    Bull Pup 12D Model Rocket Kit

    Estes Bull Pup 12D Model Rocket Kit

    The Estes Bull Pup 12D is a sport-scale version of the Air Force's AGM-12D Bull Pup missile. The Bull Pup makes a great first scale model.

    Centuri Model Rocket Kit

    Estes Centuri Model Rocket Kit

    A tribute to yesterday's rockets, the Estes Centuri features laser-cut wood fins and a 12" parachute.

    Chiller Model Rocket Kit

    Estes Chiller Model Rocket Kit

    The Estes Chiller is an "Almost Ready to Fly" model rocket. Its shiny chrome nose cone makes it easy to track on a sunny day. Assembly is so simple, slip the fin into the fin slots then attach the recovery system. Add the BT-55 Booster Accessory (sold separately) for two-stage flights.

    Chrome Domes Gold Model Rocket Kit

    Estes Chrome Domes Gold Model Rocket Kit

    With gold chrome fins and nose cone, the Estes Chrome Domes Gold model rocket kit is sure to put a sparkle in your eye. A prismatic body tube completes the jewel-like appearance of this easy-to-build rocket kit.

    Chuter 2 Model Rocket Kit

    Estes Chuter 2 Model Rocket Kit

    The Estes Chuter 2 features dual parachutes which bring this classic rocket back to Earth in style after blasting off to heights of up to 900 feet. The unique fin design and colorful body of the Chuter-Two make it a great rocket for anyone.

    Estes has gone back to the archives and pulled up old drawings and spec sheets to bring back this vintage design. The kit has been reproduced and updated while retaining the classic lines of the original. The Chuter-Two kit contains high-quality body tubes, a balsa nose cone, and laser-cut balsa fins.

    Citation Series Patriot Model Rocket Kit

    Estes Citation Series Patriot Model Rocket Kit

    A true Estes Classic has returned. The Citation Patriot is launched on B and C engines going up to about 600 feet. High-quality waterslide decals, laser-cut balsa fins, laser-cut cardstock centering rings, and a pre-assembled 18 -nch parachute add to the beauty of this simple Skill Level 1 builder's kit.

    Cobra Model Rocket Kit

    Estes Cobra Model Rocket Kit

    The new Estes Cobra is a menacing, futuristic fighter. Standing 18" tall, the Cobra has an 8" wing span.

    This kit includes laser-cut wood fins and waterslide decals.

    Conquest Model Rocket Kit

    Estes Conquest Model Rocket Kit

    The time and experience you put into building the Estes Conquest will be rewarded when you see this futuristic rocket blast form the launch pad on a D or E motor.

    Cosmic Cobra Model Rocket Kit

    Estes Cosmic Cobra Model Rocket Kit

    You'll be amazed when the rocket returns to earth with a parachute while the nose cone helicopters down.

    The Cosmic Cobra streaks to altitudes over 500 feet high. Two recovery devices are used to tame this reptile. The main rocket, with upswept fins, returns to earth on a colorful 12 inch parachute while the sleek nose cone helicopters down on bright colored, retractable rotor blades. Assembly of the Cobra takes about one hour or less, making it a great choice for any beginner! You'll draw a crowd at the flying field when you blast this unique rocket into space!

    Cosmic Explorer Model Rocket Kit

    Estes Cosmic Explorer Model Rocket Kit

    This sleek design from Estes features quality body tubes, a large balsa nose cone, laser-cut balsa fins, and easy-to-apply waterslide decals.

    Cosmic Interceptor Model Rocket Kit

    Estes Cosmic Interceptor Model Rocket Kit

    The Cosmic Interceptor is an awesome D and E powered rocket. Standing 40.5 inches tall, this is one impressive rocket on the launch pad and in the air! Sharpen your building skills before tackling this one.

    Dark Energy Model Rocket Kit

    Estes Dark Energy Model Rocket Kit

    One of a kind, the Dark Energy is unlike any rocket before. It features an awesome five-fin design and the waterslide decals and paint give it a sweet futuristic look.

    Der Red Max Model Rocket Kit

    Estes Der Red Max Model Rocket Kit

    Der Red Max is a re-issue of the classic kit which first appeared in Estes's 1971 catalog. The rocket is a little more than 16 inches tall. It includes waterslide decals, laser-cut balsa fins, and a pre-assembled 18" parachute.

    Double Ringer Model Rocket Kit

    Estes Double Ringer Model Rocket Kit

    Bright colors, quick assembly time and unique cylindrical gliders make the Double Ringer a must-have kit. In thirty minutes or less budding rocketeers can snap together the plastic fin unit, cut out the gliders, and assemble the parachute. After the launch, the rocket returns to earth on its 15-inch parachute while the gliders tumble gently back down to the ground.

    Eggscaliber Model Rocket Kit

    Estes Eggscaliber Model Rocket Kit

    The Estes Eggscaliber has a special clear payload section which holds an egg. With the included engine adapter, it can fly on B/C or D/E motors.

    A motor adapter is included so you can launch your rocket on standard Estes engines or remove the adapter to fly the rocket on more powerful D or E engines. The Eggscaliber with its large payload section is also great for science experiments. The Eggscaliber is a Skill Level 2 kit which requires more skills in building and painting.

    Use of an E motor requires a larger launch pad such as the Estes Porta-Pad E and a more-powerful launch controller such as the Estes E Launch Controller. The launch pad and controller ore sold separately.

    Eggs (and bacon) not included.

    Recommended Motors (with egg): B6-2, C6-3, C11-3, D12-3, E9-4
    Recommended Motors (no egg): B4-2, B6-2, C6-5, D12-5, E9-6

    Eliminator Model Rocket Kit

    Estes Eliminator Model Rocket Kit

    The Estes Eliminator is a super high performance model rocket design intended for high altitude, cloud punching flying on our powerful E engines! The rocket is almost 31 inches tall and features purple wrapped body tubes and a one piece molded fin set that can handle all the power an E can deliver. A bright yellow nose cone sits atop the rocket while the tribal looking self-stick decals add to its visibility...which you're going to need as the E engine pushes this beast up to 1,400 feet.

    Assembly of this high performance hot rod takes about an hour. When completed you'll be ready for the flight pad for some serious high altitude, blistering fast model rocket flying. Recovery is accomplished using a colorful 12 inch, preassembled parachute for soft landings. Includes an adapter that allows you to quickly convert from E to D engine power.

    Eliminator XL Launch Set

    Estes Eliminator XL Launch Set

    The Estes Eliminator XL rocket stands 44 inches tall. Assembly is easy, just twist the sections together. The Eliminator XL is ready to launch in just a few minutes.

    This set includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. A 3/16-inch Maxi Launch Rod is also included.

    Engines, batteries, and other supplies are not included.

    EPM-010 Model Rocket Kit

    Estes EPM-010 Model Rocket Kit

    The EPM-010 features swept forward fins with outer navigational pods for interplanetary space travel. Its long slender design will reward you with straight, out-of-site flights. This hot-looking rocket floats back to earth on a pre-assembled 12 inch parachute. Standard Engine powered, the EPM-010 soars to over 900 feet.

    Estes SLV Model Rocket Kit

    Estes Estes SLV Model Rocket Kit

    The Estes SLV will blast off the launch pad and reach heights of 1000 feet when powered by an E12-4 engine! That's called "extreme altitude". Standing over 34 inches tall, this "Satellite Launch Vehicle" is very impressive on the launch pad and even more so in the sky. High quality body tubes and laser cut wood fins are just some of the outstanding features of this kit.

    Executioner Model Rocket Kit

    Estes Executioner Model Rocket Kit

    The Execution is over 36" tall and flies on powerful D and E motors. The kit includes a slotted body tube and laser-cut wood fins.

    Expedition Model Rocket Kit

    Estes Expedition Model Rocket Kit

    The Estes Expedition takes to the skies on C, D or E motors. Standing just over two-feet tall when assembled, the Expedition features laser-cut fins, water-slide decals and an 18" parachute.

    Firestorm Model Rocket Kit

    Estes Firestorm Model Rocket Kit

    The Estes Firestorm is an "Almost Ready-to-Fly" (ARTF) model rocket featuring uniquely colored plastic fins and nose cone. Just slip the fins into the fin can and the rocket is ready to prep for flight.

    Add the BT-60 Booster accessory (sold separately) to fly the Firestorm as a two-stage rocket.

    Fletcher Model Rocket Kit

    Estes Fletcher Model Rocket Kit

    The Estes Fletcher is a sleek, arrow-like rocket designed to soar to over 325 feet on mini engines. The cool black and blue styling gives this rocket a unique look.

    Flip Flyer Model Rocket Kit

    Estes Flip Flyer Model Rocket Kit

    The Estes Flip Flyer is an easy-to-assemble kit featuring parachute and helicopter recovery. The nose of the rocket returns to earth under a parachute while the body deploys rotors and returns like a helicopter.

    Flying Colors Model Rocket Kit

    Estes Flying Colors Model Rocket Kit

    Este's Flying Colors model rocket sports a fun color scheme. It's almost fully assembled when you get it. Just slip the fins into the fin can, and it's ready to prep for launch. Add the BT-60 Booster accessory (sold separately) to convert the Flying Colors to a multi-stage rocket.

    Fractured Model Rocket Kit

    Estes Fractured Model Rocket Kit

    Easily assembled and ready for flight quickly, the Fractured doesn't require any painting. It flies up to 550 feet on a C6-3 or C6-5 engine. Add the Booster-60 accessory (sold separately) for two-stage flights.

    Freefall Model Rocket Kit

    Estes Freefall Model Rocket Kit

    The Freefall is easy to assemble and includes a parachute man with his own parachute for recovery. Standard engine powered, the Freefall can reach 575 feet.

    Galaxy Glow Model Rocket Kit

    Estes Galaxy Glow Model Rocket Kit

    The Estes Galaxy Glow model rocket kit is a perfect S.T.E.M. adventure for the first-time rocketeer. Experience the thrill of building and flying your own high-performance model rocket with minimal waiting. This rocket is as much fun to build as it is to fly

    In addition to the fun and excitement of building, launching, and recovery of your own model rocket, the high-flying Galaxy Glow has significant STEM educational value. This ultra-sleek and colorful model rocket can provide some of the basic building blocks for understanding Newton’s Laws of Motion. The Galaxy Glow is a great looking, easy to assemble (E2X) model rocket kit that features a molded lime green nose cone, fin can, and fins, pre-colored body tube and self-stick decals. The kit can be assembled and ready to fly in about an hour. When launched with an Estes C6-7 engine, the almost 20 inches tall Galaxy Glow can reach heights of 1,100 feet and is easily recovered by its 12-inch parachute.

    Galaxy Gold Model Rocket Kit (OOP)

    Estes Galaxy Gold Model Rocket Kit (OOP)

    This almost-ready-to-fly kit is easy to assemble and quick to fly. Just twist on the fin unit then prep for flight.

    Guardian Model Rocket Kit (Non-Retail Packaging)

    Estes Guardian Model Rocket Kit (Non-Retail Packaging)

    With a multi-fin design resembling a surface-to-air missile, the Guardian is a Skill Level 2 rocket with parachute recovery.

    This is a new kit, still sealed in clear packaging rather than fancy retail packaging.

    Helicat Launch Set

    Estes Helicat Launch Set

    In just a few minutes you will have this rocket ready for the launch pad. The Estes HeliCAT features a unique helicopter nose cone recovery that is a blast to watch land.

    You will need glue and plastic cement, but assembly of the HeliCAT is easy and no painting is necessary. Powered by standard Estes engines, this quickly built rocket reaches heights of over 500 feet.

    This is a launch set which includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. Batteries, rocket motors, and other launch supplies are not included.

    Helios Model Rocket Kit

    Estes Helios Model Rocket Kit

    The Estes Helios is an almost-ready-to-fly rocket featuring a bright silver body tube and yellow fins and nose cone. Slide the fins into the fin can and the rocket is ready to prep for flight.

    The BT-60 Booster accessory (sold separately) converts the Helios into a two-stage rocket.

    Hi Jinks Model Rocket Kit

    Estes Hi Jinks Model Rocket Kit

    The Estes Hi Jinks is a brightly-colored, ready-to-fly, standard engine powered kit. The Hi Jinks is 14 inches tall and is factory assembled and decorated.

    This Hi Jinks can reach altitudes of well over 1100 feet. Recovery is safe and reliable with its 12-inch parachute.

    Hi-Flier XL Model Rocket Kit

    Estes Hi-Flier XL Model Rocket Kit

    The Hi-Flier XL is an upsized replica of the #1 selling Estes Hi-Flier! Powered by C11, D and E engines, this sporty rocket can reach amazing heights.

    Honest John Model Rocket Kit

    Estes Honest John Model Rocket Kit

    Estes's 1/14th scale Honest John flies on an E motor to an altitude of about 1400 feet then returns to earth via parachute.

    Hornet Model Rocket Kit

    Estes Hornet Model Rocket Kit

    The Estes Hornet is a sporty, easy-to-assemble rocket featuring an eye-catching waterslide decal.

    Hyper Bat Model Rocket Kit

    Estes Hyper Bat Model Rocket Kit

    The Estes Hyper Bat is a two-stage model rocket kit with a plastic nose cone and laser-cut fins.

    Indicator Model Rocket Kit

    Estes Indicator Model Rocket Kit

    The Estes Interceptor is a simple build which flies on inexpensive mini-engines! Standing over 21 inches tall, the Indicator reaches 200 feet on an A10-3T engine.

    Interceptor Model Rocket Kit

    Estes Interceptor Model Rocket Kit

    Envisioned by Estes designers to be operational by 2050, the Estes “Interceptor” is an ultra-sophisticated rocket that could patrol our galaxy for possible aggression by hostile aliens. Highly advanced defense systems, which includes photon and laser armaments as well as ION drive for extended tours around the Milky Way only enhance the rocket! This kit returns with quality features Estes is known for like laser cut balsa parts, two full color waterslide decals and detailed plastic parts including the nose cone, wing pods, and tail cone.

    When properly outfitted for launch, flights over 500 feet are possible with a soft landing on a colorful 18” parachute. The futuristic looking Interceptor is sure to be the envy of everyone at the launch site.

    Towering over two feet tall, the Interceptor delivers excellent flight performance on B and C engines. When launched on the recommended C engine, this gorgeous rocket blasts to heights of more than 525 feet.

    JBR-013 Model Rocket Kit

    Estes JBR-013 Model Rocket Kit

    Estes's JBR-013 features laser-cut wood fins which you assemble. The JBR-013 flies on standard engines and can reach heights of 775 feet.

    Jetliner Model Rocket Kit

    Estes Jetliner Model Rocket Kit

    The Estes Jetliner will remind long-time rocketeers of the Goonybirds series of rockets from the 1970s.

    Laser Lance Model Rocket Kit

    Estes Laser Lance Model Rocket Kit

    The Laser Lance stands over 20 inches tall and can reach heights of 925 feet. A military-style model, it's sure to be a crowd pleaser!

    Little Joe I Model Rocket Kit

    Estes Little Joe I Model Rocket Kit

    The Little Joe booster was the first rocket designed solely for manned spacecraft qualifications and to measure critical parameters at higher altitudes. The Estes 1/34th scale Little Joe stands almost 18 inches tall and launches to 400 feet on a C6-5 engine. Other features include a plastic Mercury capsule and engine nozzles, precision laser-cut balsa, printed card-stock fins, high-quality waterslide decals, and a colorful 15-inch parachute for "safe reentry." The Little Joe 1 will soon be in stock for an exciting holiday gift that every rocketeer will want to build and proudly display.

    Little Joe II Model Rocket Kit

    Estes Little Joe II Model Rocket Kit

    Estes's scale model of the Liittle Joe II features a plastic nose cone, vacuum-formed wraps, and injection-molded plastic fins and nozzles. This is a large scale model which flies on composite E motors.

    Loadstar II Model Rocket Kit

    Estes Loadstar II Model Rocket Kit

    The Estes Loadstar II is a great rocket with great performance. This two-stage rocket includes a large payload section.

    Longneck Express Model Rocket Kit

    Estes Longneck Express Model Rocket Kit

    Fast to the flying field, the Longneck Express is a fully assembled, great looking, really high-flying model rocket. Recovery is quick with 12-inch parachute so you can launch again and again.

    Lynx Model Rocket Kit

    Estes Lynx Model Rocket Kit

    Powered by the more-economical Estes mini-engines, the Lynx is a challenging kit to build that will reward you with its futuristic style and great flights.

    Magician Model Rocket Kit

    Estes Magician Model Rocket Kit

    Conjure up some special space magic with the Magician! No tricks up anyone's sleeve here, just a super high performance payload model rocket. The talented Estes rocket shop designers have spun their magic to create an enormous, supersized payload rocket. The Magician can handle all the power you put in the motor tube to send it on a magical mystery tourof the atmospheric kind.

    This sorcerer stands an impressive 33.5 inches tall and has a clear payload section. You can launch just about anything into space. Well, not quite anything, but its sure to hold a small race car, an action figure, or whatever your imagination can dream up. If it fits into the payload section, launch it.

    A Skill Level 3 rocket, this kit comes with a high quality balsa nose cone, laser cut balsa fins and waterslide decals. Designed to be flown on D or E engines, this rocket will scream off the launch pad to heights over 1,600 feet. Getting this illusionist back to earth is magically accomplished on a colorful pre-assembled 18 inch parachute.

    Mean Machine Model Rocket Kit

    Estes Mean Machine Model Rocket Kit

    The Estes Mean Machine is a staggering 6 1/2 feet tall. It provides slow majestic flights.

    The Mean Machine comes with an adapter that allows it to be launched with either with D or E engines. Estes has updated this classic with a connector that allows the rocket to be broken down into two sections for easier transportation and storage.

    Mega Mosquito Model Rocket Kit

    Estes Mega Mosquito Model Rocket Kit

    The Mega Moquito is an upscale of the classic Estes Mosquito. Parts to build an original-size Mosquito are also included.

    Mercury Redstone Model Rocket Kit

    Estes Mercury Redstone Model Rocket Kit

    Estes's scale model of the Liberty Bell 7 Mercury spacecraft and its Redstone booster features plastic parts, wooden fins, and waterslide decals.

    Mini Fat Boy Model Rocket Kit

    Estes Mini Fat Boy Model Rocket Kit

    Estes has produced a smaller version of its classic Fat Boy model rocket kit. The Mini Fat Boy flies on 13mm motors and features parachute recovery.

    Mini Honest John Model Rocket Kit

    Estes Mini Honest John Model Rocket Kit

    The Estes Mini Honest John is a mini-engine-powered sport scale model of the U.S. battle field artillery missile. The kit features a detailed molded nose cone and laser-cut balsa fins. Simple to build, the resulting model features plenty of detail that you will be proud to display.

    Mini Mean Machine Model Rocket Kit

    Estes Mini Mean Machine Model Rocket Kit

    As a scaled down version of the original Estes Mean Machine, the Mini Mean Machine is easy-to-assemble and almost 40 inches long. The kit features high-quality body tubes, laser-cut balsa fins, and a colorful 12-inch parachute. Flying on economical mini-engnes, the Mini Mean Machine is great for small field launches. The Mini Mean Machine is just as spectacular in flight as it's bigger brother and can reach altitudes over 200 feet.

    Mix-n-Match 50 Model Rocket Kit

    Estes Mix-n-Match 50 Model Rocket Kit

    The Mix-n-Match 50 set includes parts to build three colorful rockets. All parts are pre-colored, so no painting is required. Two sheets of self-stick decals are included.

    The Mix-n-Match 50 includes BT-50 (0.976 inch diameter) parts:

    • Three nose cones and nose cone inserts
    • Six pre-colored BT-50 (.98 in diameter) body tubes
    • Three body tube connecters
    • Three fin can units
    • Twelve fins in three different styles
    • Three launch lugs and clear reinforcements
    • Three shock cords
    • Three pre-assembled parachutes
    • Two self-stick decal sheets
    Mix-n-Match 60 Model Rocket Kit

    Estes Mix-n-Match 60 Model Rocket Kit

    The Mix-n-Match 60 set includes parts that you can use to create three colorful rockets. Express your creativity by combining the parts your way.

    All of the parts are pre-colored, so no painting is required. Two sheets of self-stick decals are included.

    The Mix-n-Match 60 includes BT-60 parts:

    • Three nose cones and nose cone inserts
    • Six pre-colored BT-60 (1.64 inch diameter) body tubes
    • Three body tube connecters
    • Three fin can units
    • Twelve fins in three different styles
    • Three launch lugs and clear reinforcements
    • Three shock cords
    • Three pre-assembled parachutes
    • Two self-stick decal sheets
    Multi-Roc Model Rocket Kit

    Estes Multi-Roc Model Rocket Kit

    The Estes Multi-Roc flying model rocket kit lets you do it all. Fly it as a a single-stage, payloader, two-stage ... even release a glider at apogee.

    This parts-packed kit has everything you need to fly six different ways. Fly to 1200 feet as a dual-stage rocket or stay closer to Earth with a single-stage launch. Plug in the payload section, or boost the all-balsa glider to altitude. No other model rocket kit —gives you so many options for high-flying fun,

    Nemesis Model Rocket Kit

    Estes Nemesis Model Rocket Kit

    Estes introduced the Nemesis in their 2001 catalog. It features a futuristic spaceship design with a cockpit molded into the nosecone.

    Produced from about 2001 to 2004, this kit is still in the original packaging.

    Nike Apache Model Rocket Kit

    Estes Nike Apache Model Rocket Kit

    The Estes Nike Apache is a single-stage scale kit.

    Nike Smoke Model Rocket Kit

    Estes Nike Smoke Model Rocket Kit

    The Estes Nike Smoke is a 1/10th scale flying model of the Nasa sounding rocket developed in the 1960s to explore the behavior of horizontal winds in the upper atmosphere.

    Nike-X Model Rocket Kit

    Estes Nike-X Model Rocket Kit

    The Estes Nike-X single-stage rocket is a scale-like model of the US Army's fourth-generation, two-stage surface-to-air interceptor missile. This kit features a Nike-style design with Army details including high-quality, realistic roll-pattern waterslide decals.

    Nitro Model Rocket Kit

    Estes Nitro Model Rocket Kit

    Fully-assembled and standing 12.6 inches tall, the Estes Nitro can reach 425 feet in altitude!

    No.2 Skywriter Model Rocket Kit

    Estes No.2 Skywriter Model Rocket Kit

    This fun No. 2 Skywriter rocket looks like a wooden pencil. The Skywriter includes colored body tubes, fins, and nose cone, so assembly is quick and easy.

    Odyssey Model Rocket Kit

    Estes Odyssey Model Rocket Kit

    The Estes Odyssey is a futuristic rocket powered by 24mm motors. Packed with Sci-Fi details, the Odyssey is a challenging, Skill Level 5 kit.

    Patriot M104 Model Rocket Kit

    Estes Patriot M104 Model Rocket Kit

    This one-tenth scale model of the Army's M-104 Patriot air defense missile features authentic decals and parachute recovery.

    Pegasus Model Rocket Kit (OOP)

    Estes Pegasus Model Rocket Kit (OOP)

    Estes produced the Pegasus kit from about 1993 through 1995. The quickly-bulit rocket requires no painting.

    This is an out-of-production kit.

    Phantom Blue Model Rocket Kit

    Estes Phantom Blue Model Rocket Kit

    Assembled from pre-colored parts, the Phantom Blue can be ready to fly in under an hour.

    Phoenix Bird Model Rocket Kit

    Estes Phoenix Bird Model Rocket Kit

    Based on the classic Centuri Phoenix Bird kit from the late 1970s, the new Estes Phoenix Bird features through-the-wall fins and self-stick foil decals.

    Photon Probe Model Rocket Kit

    Estes Photon Probe Model Rocket Kit

    The Estes Photon Probe is a "Classic Series" re-issue of a futuristic kit which was originally released in 1991.

    Plasma Probe Model Rocket Kit

    Estes Plasma Probe Model Rocket Kit

    The Estes Plasma Probe captures the futuristic design of Centuri kits from the 1970s.

    Protostar Model Rocket Kit

    Estes Protostar Model Rocket Kit

    The Estes Protostar is about two feet tall and flies on 24mm C11, D12, and E12 motors. Add its furturistic design to your space fleet.

    QCC Explorer Model Rocket Kit

    Estes QCC Explorer Model Rocket Kit

    Don't let the looks fool you with this Skill Level 4 kit. It may look like it's simple to build, but what's under the paint will surprise you! Each simulated air intake/fin assembly is constructed from 12 interlocking laser cut balsa pieces.

    Red Nova Model Rocket Kit

    Estes Red Nova Model Rocket Kit

    TThe Red Nova is D-engine powered and a great four-fin rocket. The Red Nova stands 21.6 inches tall and can reach an altitude of 800 feet. This well-designed kit comes with the standard high-quality parts that Estes is known for - precision laser-cut wood fins, a high-quality body tube, a plastic nose cone, a colorful pre-assembled parachute and impressive waterslide decals.

    Reflector Model Rocket Kit

    Estes Reflector Model Rocket Kit

    The easy-to-assemble Estes Reflector has a large payload section, laser-cut fins, and waterslide decals.

    Ricochet Model Rocket Kit

    Estes Ricochet Model Rocket Kit

    This Skill Level 1 rocket is part of Estes's "Basic Builder Series."It is simple to build and paint, but features distinctive Air-to-Air missile styling. The Ricochet flies up to 1125 feet on a C motor.

    Rocket Red Crayon Model Rocket Kit

    Estes Rocket Red Crayon Model Rocket Kit

    Rocket Red is a RTF crayon-themed rocket. It stands almost 20" tall and features a twist-on fin section.

    Rookie Model Rocket Kit

    Estes Rookie Model Rocket Kit

    There is nothing "rookie" about the Estes Rookie rocket. Quick to assembe and a high flier, the Rookie is powered by standard engines and can reach heights over 500 feet. And if you want to go really high, add the BT-60 Booster Accessory (sold separately) and a D12-0 booster engine then watch this rocket soar.

    SA-2061 Sasha Model Rocket Kit

    Estes SA-2061 Sasha Model Rocket Kit

    Inspired by Russian missiles, the Sasha features a scale-like design and cn be flown as either a single-stage rocket or a two-stage rocket.

    Satellite Silver Model Rocket Kit

    Estes Satellite Silver Model Rocket Kit

    Estes's Satellite Silver rocket is styled like a flying crayon. Just insert an engine, twist on the fin unit, attach the shock cord to the nose cone, and you are ready for launch.

    A couple of minutes of your time and you are on the flying field ready to blast off. Standing almost 20 inches tall, this rocket goes well over 500 feet.

    Scorpion Model Rocket Kit

    Estes Scorpion Model Rocket Kit

    The Estes Scorpion is a futuristic mini-engine powered rocket.The kit features laser-cut wood fins, waterslide decals, and a parachute for recovery.

    Screaming Eagle Model Rocket Kit (OOP)

    Estes Screaming Eagle Model Rocket Kit (OOP)

    This out of production kit from Estes is new in the original packaging.

    The ultra-cool Estes Screaming Eagle looks great sitting in the hanger, but screams to be out soaring with the other eagles. Let this bird out of his cage and experience the thrill of flying with a stealthy hunter. The Screaming Eagle soars to nearly 600 feet using standard model rocket engines. After each flight, the Screaming Eagle lands softly under a bright 12-inch preassembled parachute, making for an enjoyable afternoon of bird watching.

    This superbly-detailed rocket has awesome markings that will be the envy of all rocketeers. Great to fly or to display, the Estes Screaming Eagle features laser-cut balsa fins and waterslide decals.

    Show Stopper Model Rocket Kit

    Estes Show Stopper Model Rocket Kit

    The Estes Show Stopper is almost ready to fly when you receive it.  It features a bright chrome body and files on 24mm C and D motors for impressive lift-offs.

    Shuttle Model Rocket Kit

    Estes Shuttle Model Rocket Kit

    The Estes Shuttle is a nod to the past as well as a look toward the future. The retro-styled orbiter is launched on a next-generation heavy-launch system. At apogee, a parachute deploys to safely recover the booster while the orbiter begins its slow glide back to earth.

    Shuttle Xpress Model Rocket Kit

    Estes Shuttle Xpress Model Rocket Kit

    The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.

    The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.

    After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!

    The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.

    Sky Cruiser Model Rocket Kit

    Estes Sky Cruiser Model Rocket Kit

    The Estes Sky Cruiser is an easy-to-assemble model rocket kit featuring a plastic fin unit and self-stick decals.

    Sky Duster Model Rocket Kit

    Estes Sky Duster Model Rocket Kit

    The Estes Sky Duster comes already assembled and finished. It flies on Estes mini-engines.

    Sky Hawker Model Rocket Kit

    Estes Sky Hawker Model Rocket Kit

    The Sky Hawker is a ready-to-fly rocket with a 12-inch parachute.

    Sky Twister Model Rocket Kit

    Estes Sky Twister Model Rocket Kit

    The easy-to-assemble Sky Twister features a nose cone with helicopter recovery. The nose cone deploys rotor blades and spins back to earth while the rest of the rocket returns under a parachute.

    Solar Warrior Model Rocket Kit

    Estes Solar Warrior Model Rocket Kit

    A sleek sport rocket standing 27 inches tall, the Solar Warrior is screaming to be added to your collection. This rocket can heights over 900 feet.

    The Solar Warrior flies on C11 and D and engines and a bright 18-inch parachute brings it back to earth. Be the first in your neighborhood to get this hot rocket!

    Solaris Model Rocket Kit

    Estes Solaris Model Rocket Kit

    Bright colors and a colorful parachute make this easy-to-build rocket easy to track in the sky.

    Space Crater Model Rocket Kit

    Estes Space Crater Model Rocket Kit

    The Space Crater is an easy introduction to egg-lofting. With pre-colored parts and a self-stick decal, the Space Crater is a quick build.

    Space Eagle Model Rocket Kit

    Estes Space Eagle Model Rocket Kit

    The Estes Space Eagle is simple to build and exciting to fly. Standing over 26 inches (66 cm) tall, the Space Eagle is sure to be a crowd pleaser.

    Space Twister Model Rocket Kit

    Estes Space Twister Model Rocket Kit

    Take to the skies with the Space Twister and watch this rocket climb 900 feet when launched on a C6-5 engine. Unique fins make for a spinning rocket, thus the name Space Twister. A pretty simple build but be sure and take your time on the fins so you get that fun and unique spin effect.

    Star Orbiter Model Rocket Kit

    Estes Star Orbiter Model Rocket Kit

    The Estes Star Orbiter flies on Estes's black powder E and F motors. This kit includes laser-cut wood fins, a screw-on motor retainer, and a parachute.

    Starbase Starcruiser Model Rocket Kit (OOP)

    Estes Starbase Starcruiser Model Rocket Kit (OOP)

    The Starbase Starcruiser was produced by Estes in 1995 specifically for the US Department of Defense's STARBASE youth program.

    STARBASE is an educational program, sponsored by the Office of the Assistant Secretary of Defense for Reserve Affairs. STARBASE students participate in challenging "hands-on, mind-on" activities in Science, Technology, Engineering, and Math.

    This kit is still in the original, plain plastic bag, packaging. It features a plastic fin set and a large, self-stick decal sheet.

    Starship Nova Model Rocket Kit

    Estes Starship Nova Model Rocket Kit

    Another return of a classic. The Estes Starship Nova is back!

    STM 012 Model Rocket Kit

    Estes STM 012 Model Rocket Kit

    The STM 012 is a sporty, 24mm-powered bird. It features a slotted body tube and waterslide decals.

    Super Neon XL Model Rocket Kit

    Estes Super Neon XL Model Rocket Kit

    The Estes Super Neon XL is a large, impressive rocket. It's space-age multi-tube fin design provides superior flight stability and a one-of-a-kind look. The Super Neon XL is a gigantic, more-powerful upscaled version of the Estes Super Neon.

    The Super Neon XL features laser cut wood parts, a high-quality wood nose cone, neon waterslide decals, and top quality Estes body tubes. These features combine to guarantee outstanding flight performance. Towering over most rockets at 37 inches, the XL lifts off on powerful Estes D and E engines. It returns smoothly to earth under a vivid 24-inch parachute.

    The Dude Model Rocket Kit (OOP)

    Estes The Dude Model Rocket Kit (OOP)

    The Dude stands more than seven feet tall when ... inflated. This kit incudes the rocket, a launch pad, and a launch controller. It was produced in the early 2000s and is out of production. This kit is still sealed in the original packaging.

    Top Shot Model Rocket Kit (OOP)

    Estes Top Shot Model Rocket Kit (OOP)

    The Top Shot kit from Estes in no longer in production. Standing more than three-feet tall, the Top Short soars out of sight on D and E motors.

    V-2 Semi-Scale Model Rocket Kit

    Estes V-2 Semi-Scale Model Rocket Kit

    Powered by C11, D12 and E9 engines, the Estes V2 kit is a flying scale model of the Aggregat-4 ballistic missile developed by the Germans during World War II. After the war, the US used the V-2 as a research rocket to kick-start its rocket development program.

    Xarconian Cruiser Model Rocket Kit

    Estes Xarconian Cruiser Model Rocket Kit

    The next generation in planetary defense is the Xarconian Cruiser. It is capable of both planetary and space flight. The cruiser's Hyper-Plasma engine pods serve as booth propulsion and offensive weaponry.

    Estes's flying model of this future interplanetary spaceship contains many details that a craftsman modeler will enjoy. This Skill Level 5 rocket flies over 500 feet and returns safely to earth under an 18-inch parachute.

    Onyx Rocket Kit

    LOC/Precision Onyx Rocket Kit

    The LOC/Precision Onyx has a large diameter and stout appearance which makes this bird a natural for sport flying. A single G motor can propel this vehicle to 1800 feet. This kit includes a heavy duty airframe and motor mount tubes, high-grade precision-cut plywood fins and centering rings, a rip-stop nylon parachute, nylon elastic shock cord and mount, launch lug, a polypropolene nose cones and instructions. Decals are not included.

    Cowabunga Rocket Kit

    Madcow Rocketry Cowabunga Rocket Kit

    Madcow's four-inch diameter Cowabung is a high-power rocket hit with a plastic nose cone, Delrin rail buttons, a pre-slotted body tube, 38mm motor mount, pre-cut plywood fins, and a tubular nylan shock cord.


    This kit does not come with decals or a parachute. We recommend the use of a 30" nylon parachute.

    Mini DX3 Model Rocket Kit

    Madcow Rocketry Mini DX3 Model Rocket Kit

    With a 29mm motor mount, the Madcow Mini DX flies on a wide range of motors from D through G impulse. This kit features a fiberglass nose cone, heavy-duty airframe, flameproof 'chute protector, nylon parachute, and laser-cut fins.

    Momba Model Rocket Kit

    Madcow Rocketry Momba Model Rocket Kit

    A terrific introduction to higher-power rockets, the Momba kit from Madcow features a durable plastic nose cone, a flameproof chute protector, laser-cut plywood parts, a Kevlar/Nylon shock cord, and a heavy-duty body tube.

    Skipper Rocket Kit

    Madcow Rocketry Skipper Rocket Kit

    The balsa tailcone adds a touch of excitement to the Skipper's 3FNC design. This Madcow kit includes a plastic nose cone, laser-cut plywood parts, a 'chute protect, nylon parachute, and a vinyl decal.

    Striker Rocket Kit

    Madcow Rocketry Striker Rocket Kit

    Sharp angles define the design of Madcow's Striker kit. This quality kit includes a 29mm motor mount, plastic nose cone, plywood fins, a parachute protector, and a nylon parachute.

    Klingon Bird of Prey Model Rocket Kit

    MPC Klingon Bird of Prey Model Rocket Kit

    This Star Trek themed rocket is easy to build. It features a clear green payload compartment.

    USS Enterprise Model Rocket Kit

    MPC USS Enterprise Model Rocket Kit

    MPC's USS Enterprise rocket is easy to build with two pre-decorated body tubes.  It is 28.71" (72.9cm) long with a diameter of 1.58" (40mm) and uses standard engines from Estes and Quest. The kit includes self-stick decals and a special parachute.

    USS Reliant Model Rocket Kit

    MPC USS Reliant Model Rocket Kit

    MPC's USS Reliant rocket is easy to build with a pre-decorated body tube.  The Star Trek themed rocket uses standard engines from Estes and Quest and includes self-stick decals and a special parachute.

    F-104 Starfighter Model Rocket Kit

    Odd'l Rockets F-104 Starfighter Model Rocket Kit

    The Odd'l Rockets F-104 is a new take on the classic model rocket kit. Inspired by the jet fighter kit originally produced in the late 1970s by Centuri, the Odd'l Rockets F104 Starfighter features a clear plastic canopy and waterslide decals.

    F-16 Model Rocket Kit

    Odd'l Rockets F-16 Model Rocket Kit

    Based on the classic Centuri F-16 Fighter kit of the late 1970s, the Odd'l Rockets F-16 features a heavy BT-50 body tube, clear canopy, laser-cut fins, and simulated missiles and wing-tip fuel tanks.

    Little Green Man Model Rocket Kit

    Odd'l Rockets Little Green Man Model Rocket Kit

    From the fuzzy antenna on the top of his head to the bottom of his (three) feet, this little guy is out of this world. He looks friendly enough, but what's up with that raygun on his belt? Stand back as the Little Green Man takes flight!

    Starlight Nimbus Model Rocket Kit (OOP)

    Other Starlight Nimbus Model Rocket Kit (OOP)

    We found a few old Nimbus kits from Starlight. These are still in the original bulk-style packaging.
    America Model Rocket Kit

    Quest Aerospace America Model Rocket Kit

    The Quest America sports a patriotic red, white, and blue theme. Balsa fins, a molded plastic cone, and color-coded parts make this an easy Skill Level One build.

    Big Dog Model Rocket Kit

    Quest Aerospace Big Dog Model Rocket Kit

    The Big Dog stands over 32 inches tall. The kit features a blow-molded plastic nose cone, laser-cut balsa fins, and a rugged 29mm diameter motor mount. Flights with an Aerotech F32-6W will go to almost 3,000 feet. The Big Dogreturns to earth under a large 18" fabric parachute.

    The kit includes big, easy-to-apply self-adhesive decals. It also includes an engine adapter that allows you to use 24mm engines.

    Courier Model Rocket Kit

    Quest Aerospace Courier Model Rocket Kit

    We can't think of many other ways that you can send an egg sailing 400 ft into the air and return it safely (and in time for breakfast!) The specially designed nose capsule comes unpadded - requiring your students to experiment with various methods of protecting Mr. Egg. The Courier model rocket is a traditional balsa fin design and carries it's own dual parachute recovery.

    Flies with Quest B6-2, B6-4 and C6-3 rocket motors. Can also use Estes B6-2, B6-4 and C6-5 rocket motors.

    Future Launch Vehicle Model Rocket Kit

    Quest Aerospace Future Launch Vehicle Model Rocket Kit

    Quest Aerospace's Future Launch Vehicle is a scale-like model rocket kit which captures the spirit of NASA's upcoming series of new manned rockets.

    Gamma Ray Model Rocket Kit

    Quest Aerospace Gamma Ray Model Rocket Kit

    The Gamma Ray features a red transparent payload section.

    Harpoon AGM Model Rocket Kit

    Quest Aerospace Harpoon AGM Model Rocket Kit

    Quest's Harpoon model rocket kit is accurately detailed to match the US Navy and Air Force SLAM AGM-84 Harpoon anti-ship missile. The Harpoon model rocket can reach an altitude of 800 feet.

    High-Q Model Rocket Kit

    Quest Aerospace High-Q Model Rocket Kit

    Quest's High-Q is a great looking and performing mid-size rocket. Over 30 inches tall, the kit features a blow-molded plastic nose cone, laser-cut balsa fins, and a rugged 29mm diameter motor mount. Flights with an Aerotech F32-6W will go to almost 3,000 feet. The High-Q then floats back to earth under an18" fabric parachute.

    The High-Q includes big, easy-to-apply self-adhesive decals. It also includes an engine mount adapter that allows you to use 24mm diameter engines.

    Magnum Sport Loader Model Rocket Kit

    Quest Aerospace Magnum Sport Loader Model Rocket Kit

    The Quest Aerospace Magnum Sport Loader is powered by a cluster of two rocket motors. Its large payload bay can carry two eggs or any other payload you have in mind. The Magnum Sport Loader comes with two parachutes so the payload section can be recovered separately.

    Mean Green Model Rocket Kit

    Quest Aerospace Mean Green Model Rocket Kit

    Quest's Mean Green is aerodynamic and sleek - 24 inches of pure fast rocket. The kit features a blow molded plastic nose cone, laser-cut balsa fins and a rugged 24mm diameter motor mount. Flights with a D12-5 will go to almost 1,200 feet. The Mean Green will recover gently on the big 18-inch fabric parachute. Includes big, easy-to-apply self adhesive decals.

    Minotaur Advanced Rocketry Model Rocket Kit

    Quest Aerospace Minotaur Advanced Rocketry Model Rocket Kit

    The Quest Minotaur features cool NASA styling and SIX Strap-Ons! It flies on D, E, and F motors.

    The Minotaur is a great looking and performing mid-size rocket. Over 28 inches tall, the kit features a blow-molded plastic nose cone, laser-cut balsa fins, six boosters (for show only), and a rugged 29mm diameter motor mount. Flights with an Aerotech F32-6W motor will go to almost 2,000 feet. Then your Minotaur will recover gently on the big 18" fabric parachute.

    Includes big, easy-to-apply self adhesive decals. Also includes a 24mm engine mount adapter that allows you to use 24mm diameter engines.

    Navaho AGM Model Rocket Kit

    Quest Aerospace Navaho AGM Model Rocket Kit

    Quest's two-stage Navaho AGM looks like a scale missile as it streaks up to 2100' in altitude.

    Penetrator Model Rocket Kit

    Quest Aerospace Penetrator Model Rocket Kit

    Modeled to resemble an Inter-Continental Ballistic Missile (ICBM), the Quest Penetrator model rocket kit looks every bit the part. At 37 inches the Penetrator model rocket is one of the longest of Quest's "Quick Kit" fleet and is quite a sight lifting off the launch pad. The Penetrator model rocket Quick Kit can be ready to fly in 45 minutes.

    Quad Runner Advanced Model Rocket Kit

    Quest Aerospace Quad Runner Advanced Model Rocket Kit

    Quest's Quad Runner flies on a cluster of four motors.

    Striker AGM Model Rocket Kit

    Quest Aerospace Striker AGM Model Rocket Kit

    Quest Aerospace's Striker AGM is an impressive scale-like missile which stands over 27 inches tall. The kit features a unique molded boat-tail and plastic nose cone. The laser-cut balsa fins make assembly easy and there's a big water-slide decal sheet providing lots of visual details.

    Superbird Model Rocket Kit

    Quest Aerospace Superbird Model Rocket Kit

    The Quest Super Bird Model Rocket is the perfect vehicle for long, slow and impressive flights. With an 800 ft. maximum altitude and dual parachutes the Super Bird model rocket is as interesting to watch coming down as going up!

    Triton-X Model Rocket Kit

    Quest Aerospace Triton-X Model Rocket Kit

    The Quest Triton-X is a large, easy-to-build rocket. The transition and striking decal make this a cool-looking rocket.

    Zenith II Model Rocket Kit

    Quest Aerospace Zenith II Model Rocket Kit

    The Quest Zenith II model rocket is a high performance two-stage payload vehicle. The Zenith II includes a translucent red payload bay to send projects to high altitudes. Flights up to 1500 feet are achievable depending on the payload and model rocket engines used. The Zenith II has a parachute recovery system.

    AA-10 Alamo Air-to-Air Missile Model Rocket Kit

    Rocketarium AA-10 Alamo Air-to-Air Missile Model Rocket Kit

    Rocketarium's Alamo is a scale model of the Vympel R-27 air-to-air missile (which is designated the AA-10 Alamo by NATO). Rocketarium's Alamo military scale kit is a large and heavy model rocket which makes it excellent for small launch sites. The model features three sets of fins and a boat tail

    The Alamo military scale rocket kit has three sets of pre-cut fins for a total of twelve fins. The tail cone is created from the card stock template. The kit comes with the twelve pre-cut fins, plywood centering rings, a parachute kit for recovery, and other parts needed to build the rocket.

    Recommended Engines (and estimated altitude):

    • Single Use: D12-3 (480 ft), E20-4 (910 ft), E15-4 (1070 ft)
    • Aerotech RMS 24/40: D15-4 (540 ft), E18-4 (980 ft), F12-5 (1110 ft), F24-4 (1160 ft)
    • CTI Pro24: 24-E22-4 (650 ft), 26-E31-6 (700 ft)
    Aster Military Missile Model Rocket Kit

    Rocketarium Aster Military Missile Model Rocket Kit

    The Aster missile family is generally flown in a two-stage configuration. The Aster 15 and Aster 30 missiles are identical, other than the size of the booster. The booster size determines the missile's range. The highly-agile Aster was designed to intercept next-generation supersonic anti-ship missiles.

    Rocketarium's semi-scale kit is a single-stage model of the sustainer stage of the ground-to-air Aster missile which flies on D to F engines.

    Gadfly Missile Model Rocket Kit

    Rocketarium Gadfly Missile Model Rocket Kit

    Rocketarium's Gadfly is a scale model of the Soviet SA-11 radar-guided surface-to-air missile introduced in the 1980s.

    The Gadfly military scale rocket kit flies on a cluster of three 18mm rocket engines. The large forward fins are created by gluing two shorter fin sections together. The fin sections and fins themselves are pre-cut.

    Mega Rebel Model Rocket Kit

    Rocketarium Mega Rebel Model Rocket Kit

    This Rocketarium Mega Rebel kit includes twenty-four precision-cut pieces of light plywood which assemble to form the unique flying model rocket. The Mega Rebel uses a parachute for recovery and includes a Kevlar heat shield and an elastic/Kevlar shock cord.

    Retro Rebel Model Rocket Kit

    Rocketarium Retro Rebel Model Rocket Kit

    Rocketarium has utilized a computer-controlled production process to create the intricate pieces that assemble to produce one of the most unique flying model rocket kits you'll ever see. The Rebel Rebel rocket kit includes twenty-two pre-cut plywood pieces. It uses a parachute for recovery and includes a Kevlar and elastic shock cord.

    Roland Surface-to-Air Missile Model Rocket Kit

    Rocketarium Roland Surface-to-Air Missile Model Rocket Kit

    The Roland was part of a mobile S.A.M. system which fired the missilesfrom a tube. As soon as the missiles left the tube, their fins popped into place. Different versions were developed by the U.S. Army and the French/German armed forces. The US version never made it past the development stage and was never used in battle.

    This model rocket kit comes with a lot of nose weight, required for stable flight. As a result, launches are slow and majestic. The weight limits altitude which is great for smaller launch sites.

    S-25 Berkut Model Rocket Kit

    Rocketarium S-25 Berkut Model Rocket Kit

    In the 1950s, the USSR developed the first operational Surface-To-Air Missile (SAM), the S-25 Berkut. Rocketarium's sport-scale model of the S25-Berkut has an impressive 8.47" fin span and stands nearly 28" tall.

    The kit includes a laser-cut plywood transition ring and cardstock transition template for forming the rocket's tail cone which is larger on the bottom. Quality sheets of balsa are included along with templates for the large rear and smaller canard fins.

    This sport-scale model flies on D and E motors. It is a challenging, but rewarding, kit for skilled builders.

    SA-2 Guideline Model Rocket Kit

    Rocketarium SA-2 Guideline Model Rocket Kit

    The Soviet SA-2 Guideline was the first surface-to-air missile to actually take down an enemy aircraft in flight. The Soviets deployed the SA-2 near Soviet cities, such as Moscow, to defend against USAF bombers during the cold war. Later, they were also used in East Germany.

    Rocketarium's flying scale model of the SA-2 features three sets of fins and an expanding tail cone. This unique design is fun to build and exciting to launch on a D12-5 or D17-7 motor. The finished rocket stands 26.5" tall and has a fin span of 5.625".

    Aerobee 150 Model Rocket Kit

    Semroc Aerobee 150 Model Rocket Kit

    Semroc's Aerobee 150 is a semi-scale kit of the unguided suborbital American Sounding rocket produced by Aerojet General in the 1950s.

    Aerobee 300 Model Rocket Kit

    Semroc Aerobee 300 Model Rocket Kit

    Semroc's Aerobee 300 is a semi-scale kit of the unguided suborbital American Sounding rocket produced by Aerojet General in the 1950s.

    Aerobee-Hi Model Rocket Kit

    Semroc Aerobee-Hi Model Rocket Kit

    The Semroc Aerobee-Hi is a clone of the Aerobee-Hi kit originally produced by Model Missiles Inc. between 1958 and 1961.

    Aphelion Model Rocket Kit

    Semroc Aphelion Model Rocket Kit

    Semroc's Aphelion is a recreation of their classic kit. The Aphelion was first released by Semroc in 1968. Semroc's fourth production kit was included in a "Beginner's Special" with a launch controller, launch pad, and three engines. This kit does not include the launch controller, launch pad, and engines, but it improves on the original with a slotted body tube and through-the-wall fins.

    Arcas Model Rocket Kit

    Semroc Arcas Model Rocket Kit

    Semroc's Arcas is a scale model kit of the NASA sounding rocket which was used for weather experiments and radar calibration from 1959 until 1991.

    Arcon Hi Model Rocket Kit

    Semroc Arcon Hi Model Rocket Kit

    Semroc's Archon-Hi is a model of the two-stage sounding rocket developed by the Atlantic Research Corp. for the U.S. Naval Research Laboratory. Semroc's kit is based on Centuri's semi-scale Archon-Hi kit.

    Astro 1 Model Rocket Kit

    Semroc Astro 1 Model Rocket Kit

    Semroc's Astro 1 kit is a clone of the Centuri kit. As described in the Centuri 1969 catalog, the Astro 1 is "an excellent starting kit for the beginning rocketeer. Its high performance design assures you excellent, high altitude flights every time. Upon ignition, ASTRO-1 zooms hundreds of feet into the sky."

    The original Astro-1 was one of the first model rocket kits to incorporate a "Quick-Change" engine mount that became a standard in model rocketry. Designed to be an excellent beginner’s kit, the Astro-1 became the first rocket for thousands of new model rocketeers. The “rake-back” fins were so different that many were built incorrectly with the fins glued on to resemble the Estes Alpha.

    Astro Jr Model Rocket Kit

    Semroc Astro Jr Model Rocket Kit

    The Astro-Jr is a smaller scale version of the original Astro-1 by Centuri Engineering Company.

    The Astro-Jr is designed to use 13mm mini-engines for smaller fields. Altitudes from 200 to 500 feet are possible. The Astro-Jr uses precision laser-cut fins, smooth body tube, and a sanded balsa nose cone to maintain the original look and feel in a slightly smaller package. A 12" multi-colored parachute is included for safe recovery.

    Astrobee 350 Model Rocket Kit

    Semroc Astrobee 350 Model Rocket Kit

    The Semroc Astrobee 350 is based on the classic Centuri kit released back in 1965. It is a scale model of the sounding rocket developed by the US Air Force in the early 1960s.

    Astron Model Rocket Kit

    Semroc Astron Model Rocket Kit

    The Astron is an excellent beginner's kit with laser-cut fins and a balsa nose cone.

    Baby Orion Model Rocket Kit

    Semroc Baby Orion Model Rocket Kit

    Semroc's Baby Orion is a scaled-down version of the classic Centuri Orion kit from the 1970s.

    Bandit Model Rocket Kit

    Semroc Bandit Model Rocket Kit

    Semroc's Bandit is an update of the Estes kit from the early 1970s. The original Bandit was designed by Mark Kellner and was one of the first models to use a ducted ejection system of baffles to eliminate the need for recovery wadding. The elegant design of the internal baffles is hidden as the model is built, but teaches the principles of cooling the gases before the chute is deployed.

    The Semroc Retro-Repro Bandit is very similar in design to the original. Its laser-cut internal tubes are thicker and the holes are slightly larger to accommodate modern engines. The original's die-cut fins are replaced with more accurate laser-cut fins.

    Bat Rok Model Rocket Kit

    Semroc Bat Rok Model Rocket Kit

    Semroc's Bat Rok is a reproduction of the 1968 kit released by Centuri.

    Blue Bird Zero Model Rocket Kit

    Semroc Blue Bird Zero Model Rocket Kit

    Semroc's Blue Bird Zero is a reproduction of the classic Estes kit.

    The original Blue Bird Zero was designed by Mike Dorffler while at Estes Industries. Mike was one of the most prolific designers of model rocket kits and accessories over his many years in the business. Best known as the inventor the Cineroc, Mike is also remembered fondly for all of his classics designs such as the Blue Bird Zero. It was released in the 1980 Estes Catalog as #1335.

    Centaur Model Rocket Kit

    Semroc Centaur Model Rocket Kit

    Semroc's Centaur is a reproduction of the 1960s Centuri Centaur kit.

    Centurion Model Rocket Kit

    Semroc Centurion Model Rocket Kit

    Semroc's "retro reproduction" of the Centuri Centurion kit from the 1970s features laser-cut fins, an ejection baffle, and water-slide decals.

    Cherokee D Model Rocket Kit

    Semroc Cherokee D Model Rocket Kit

    Semroc has reproduced one of the most striking of Estes's classic kits. The Cherokee-D flies on D motors for impressive flights. Semroc's kit features waterslide decals and laser-cut fins.

    Defender Model Rocket Kit

    Semroc Defender Model Rocket Kit

    The Defender includes two 12" parachutes for recovery.

    Egg Crate Model Rocket Kit

    Semroc Egg Crate Model Rocket Kit

    Semroc's reproduction of the classic 1970 Centuri Egg Crate comes with laser-cut fins, a balsa nose cone, and water-slide decals.

    Excalibur Model Rocket Kit

    Semroc Excalibur Model Rocket Kit

    Semroc’s faithful reproduction of the classic 1970s Centuri Excalibur stands over two-feet tall once assembled. The kit includes a precision-turned balsa nose cone, laser-cut fiber fins, and colorful water-slide decals. A parachute is included for recovery.

    Hydra One Model Rocket Kit

    Semroc Hydra One Model Rocket Kit

    The Hydra One is a smaller counterpart to the Semroc Hydra VII.

    IQSY Tomahawk Model Rocket Kit

    Semroc IQSY Tomahawk Model Rocket Kit

    Semroc's 1/10th semi-scale model of the IQSY Tomahawk sounding rocket features laser-cut fins and a water-slide decal.

    Iris Model Rocket Kit

    Semroc Iris Model Rocket Kit

    Semroc's 1/10th semi-scale model of the Iris sounding rocket features laser-cut fins and a waterslide decal.

    Javelin Model Rocket Kit

    Semroc Javelin Model Rocket Kit

    Semroc's Javelin is a "retro-reproduction" of the classic Centuri kit from the 1960s. The kit includes a percision-turned balsa nose cone, laser-cut balsa fins, and water-slide decals. A parachute is used for recovery.

    Laser X Model Rocket Kit

    Semroc Laser X Model Rocket Kit

    The Laser-X is Semroc's version of a rocket kit first advertised by Centuri in 1968 in the American Rocketeer magazine.

    Little Joe II Model Rocket Kit

    Semroc Little Joe II Model Rocket Kit

    This 1/70 scale flying model rocket kit includes an laser-cut parts and water-slide decals.

    Magnum Hornet Model Rocket Kit

    Semroc Magnum Hornet Model Rocket Kit

    Semroc's Magnum Hornet is inspired by the Classic Centuri kit.

    Mars Lander Model Rocket Kit

    Semroc Mars Lander Model Rocket Kit

    Semroc's Mars Lander is based on the classic Estes kit which was produced from 1969 to 1983.

    Although a challenge to build, you'll be pleased with the result. Semroc's parts and instructions are of the highest quality.

    Mars Snooper Model Rocket Kit

    Semroc Mars Snooper Model Rocket Kit

    Estes introduced the Mars Snooper in their 1966 catalog. Semroc's reproduction kit features a balsa nose cone, laser-cut fins, and parachute recovery.

    Mini Omega Model Rocket Kit

    Semroc Mini Omega Model Rocket Kit

    Semroc's Mini Omega is a downscale of the classic Estes two-stage payload rocket.

    MX-774 Model Rocket Kit

    Semroc MX-774 Model Rocket Kit

    Semroc's MX-774 is a 1/20th semi-scale flying model of the RTV-A-2 Hiroc (as it was later called), the US's first attempt at an intercontinental ballistic missile (ICBM).

    Nike-Tomahawk Model Rocket Kit

    Semroc Nike-Tomahawk Model Rocket Kit

    This 1/10 scale flying model rocket is over three-feet tall once assembled.

    Nomad Model Rocket Kit

    Semroc Nomad Model Rocket Kit

    Semroc's Nomad borrows its scale-like design from the 1970s Centuri kit.

    Omega Model Rocket Kit

    Semroc Omega Model Rocket Kit

    Semroc's Omega features a payload section, laser ut fins, and a balsa nose cone.

    Orbital Transport Model Rocket Kit

    Semroc Orbital Transport Model Rocket Kit

    The Estes Orbital Transport first appeared in the 1968 Estes catalog. Inspired by a painting on the cover of the November, 1959, issue of Popular Mechanics magazine, the Estes Orbital Transport kit featured a futuristic design with a gliding orbiter. The rocket's booster is 23 inches long and .976 inches in diameter. The orbiter is 8.6 inches long and .736 inches in diameter.

    Semroc's reproduction of the Classic Estes kit features balsa nose cones, laser-cut balsa fins, elastic shock cord, and improved shock cord mounting.


    Popular Mechanics, November, 1959

    Orion Model Rocket Kit

    Semroc Orion Model Rocket Kit

    Featuring a balsa nose cone, laser-cut fins, and an internal baffle system, Semroc's Orion flying model rocket kit is a modern update of the classic Centuri kit of the 1970s.

    Ranger Model Rocket Kit

    Semroc Ranger Model Rocket Kit

    Inspired by the Estes classic, Semroc's Ranger is a cluster-powered payload rocket.

    Satellite Killer Model Rocket Kit

    Semroc Satellite Killer Model Rocket Kit

    The Satellite Killer model rocket kit was released in 1980 by Centuri Engineering Company along with the Red-Eye as its enemy satellite. Inspired by the cold war "Star Wars" proposal, these models were a part of Centuri's "War in Space" series. Since these were done in the final days of Centuri as a separate company from Estes Industries, there were no later entries.

    The Semroc Retro-Repro Satellite Killer kit is updated with laser-cut fiber fins. The original foil decals are changed to waterslide for ease of use and durability. A Kevlar cord is added for a more reliable shock mount. Most of the rest of the model is faithful to the original design.

    Scrambler Model Rocket Kit

    Semroc Scrambler Model Rocket Kit

    Shrike Model Rocket Kit

    Semroc Shrike Model Rocket Kit

    Semroc's Shrike is a two-stage payload rocket based on the 1970s kit by Estes.

    Sky Hook Model Rocket Kit

    Semroc Sky Hook Model Rocket Kit

    Semroc's Sky Hook is a reflection of the Estes Sky Hook released in the early 1960s. Semroc's kit includes laser-cut fins.

    SLS Arcas Model Rocket Kit

    Semroc SLS Arcas Model Rocket Kit

    The SLS Arcas is a 1/2 scale model of the Arcas sounding rocket. The model flies on 24mm and 29mm motors.

    If built light-weight, this rocket can fly on D motors. By building it stronger, you can use F or G motors.

    SLS Lil Augie Model Rocket Kit

    Semroc SLS Lil Augie Model Rocket Kit

    Originally, the Lil’ Augie was released as a free plan #10 in Estes's Model Rocket News in the Fall of 1962. Semroc's kit is loosely based on that rocket, but up-scaled to take advantage of the 29mm black powder motors that are now available.

    Snipe Hunter Model Rocket Kit

    Semroc Snipe Hunter Model Rocket Kit

    The Semroc Snipe Hunter is a rocket with a payload section. It is based on the Centuri kit of the late 1960s.

    SPEV Model Rocket Kit

    Semroc SPEV Model Rocket Kit

    Semroc's "Space Exploration Vehicle" (SPEV) is based on the 1972 Estes kit.

    Starfire Model Rocket Kit

    Semroc Starfire Model Rocket Kit

    Based on the Centuri kit from the 1960s, the Semroc Starfire can be used in parachute duration contests.

    Starlight Model Rocket Kit

    Semroc Starlight Model Rocket Kit

    Semroc's Starlight kil is a reproduction of the 1960's Estes kit designed by Bill See.

    Starship Excalibur Model Rocket Kit

    Semroc Starship Excalibur Model Rocket Kit

    The Starship Excalibur was originally released as a plan from Estes in the late 1960s. This futuristic vision of a space liner flies up to 700 feet on a C motor. The kit includes seven precision-turned balsa nose cones, laser-cut parts, water-slide decals, and a parachute.

    Starship Vega Model Rocket Kit

    Semroc Starship Vega Model Rocket Kit

    Semroc brings back another classic from the past with the Starship Vega flying model rocket kit. Sporting a futuristic design, the Starship Vega made its first appearance in the 1973 Estes catalog.

    Start Model Rocket Kit (OOP)

    Semroc Start Model Rocket Kit (OOP)

    The Start was Semroc's answer to the Estes Alpha and other three-finned beginner's kits.

    Swift Boost Glider Model Rocket Kit

    Semroc Swift Boost Glider Model Rocket Kit

    The Semroc Swift glider kit is based on the classic Centuri design of the late 1960s.

    Tau Zero Model Rocket Kit

    Semroc Tau Zero Model Rocket Kit

    Semroc's Tau Zero looks great and flies straight.

    Taurus Fleet Ship Model Rocket Kit

    Semroc Taurus Fleet Ship Model Rocket Kit

    The Centuri Taurus Fleet Ship was initially released in 1972. It was designed to look like an alien plane-ary cruiser from the far away planet of Taurus. A short science fiction history was provided with the kit.

    Featuring six nose cones and reducers, the Centuri Taurus was introduced as catalog #KB-3.

    Semroc's Retro-Repro Taurus is a modern recreation of the original. It uses all balsa nose cones and transitions. Laser-cut balsa fins are included instead of the original die-cut parts. A slightly smaller chute is provided since the model is much lighter due to the use of balsa instead of plastic. A Kevlar cord is provided for better shock cord retention.

    Thunderstorm Model Rocket Kit

    Semroc Thunderstorm Model Rocket Kit

    Over six-foot tall, Semroc's ThunderStorm is sure to attract attention. The kit features through-the-wall fins and comes with a nylon parachute.

    Thunderstrike Model Rocket Kit

    Semroc Thunderstrike Model Rocket Kit

    Over four feet long when assembled, this kit features laser-cut fins and a balsa nose cone.

    Trident Model Rocket Kit

    Semroc Trident Model Rocket Kit

    Estes released its Trident kit in 1967. Semroc's re-issue of this futuristic classic features laser-cut fins and waterslide decals.

    UFO Invader Model Rocket Kit

    Semroc UFO Invader Model Rocket Kit

    The year is 1980 and at last the existence of flying saucers is a proven fact. First sighted in the mysterious Bermuda Triangle, the U.F.O. Invader has been observed by countless eyewitnesses. The Invader is a submarine as well as a deep space ship...able to travel on the ocean surface, buoyed by its wing pods. It submerges to a hidden undersea base where the aliens perhaps study Earth and its people. Little is known about the aliens, but we know this: we are not alone in the universe!

    Semroc's UFO Invader kit is based on the 1970s Centuri "Super Kit." The kit features a balsa nose cone, laser-cut fiber fins, and waterslide decals. Includes two parachutes for recovery.

    USS America Model Rocket Kit

    Semroc USS America Model Rocket Kit

    Semroc's USS America is based on the Centuri kit from the mid 1970s.

    USS Andromeda Model Rocket Kit

    Semroc USS Andromeda Model Rocket Kit

    Vector V Model Rocket Kit

    Semroc Vector V Model Rocket Kit

    The Semroc Vector V model rocket kit includes laser-cut fins, a balsa nose cone, and water-slide decals.

    Vega Model Rocket Kit

    Semroc Vega Model Rocket Kit

    Semroc's big and bold Vega includes laser-cut fins and water-slide decales.

    VF-261 Model Rocket Kit

    Semroc VF-261 Model Rocket Kit

    Based on drawings made by Vern Estes, the VF-261 model rocket kit includes laser-cut fins and a balsa nose cone.

    Visitor Model Rocket Kit

    Semroc Visitor Model Rocket Kit

    Semroc's Visitor is a Sci-Fi inspired model rocket kit featuring laser-cut fins, a precision-turned balsa nose cone, and waterslide decals.

    WAC Corporal Model Rocket Kit

    Semroc WAC Corporal Model Rocket Kit

    Semroc's 1/10th semi-scale model of the WAC Corporal features laser-cut fins and water-slide decals.

    Yung'un's Nuke Model Rocket Kit

    Semroc Yung'un's Nuke Model Rocket Kit

    The Yung'un's Nuke is the fourth of the Semroc "Groonies" series of Goonie-style model rocket kits. What can a dictator of a small third world country give to his yung'un that tells the civilized world that he means business? Just any old baby bottle is not good enough to nurse his baby boy. No, it has to serve as a message to the world that this yung'un is different. He can use this gift to provide nourishment and recycle the empties to let everyone know that he is important and can do some-thing with his life that most others cannot do. He can change the world, or at least blow up a small piece of it. This model does not include baby's milk or nuclear material, but will provide some of the fun of the original.

    NSL 2015 Commemorative Sky Wolf Rocket Kit

    SkyPyrates Rocketry NSL 2015 Commemorative Sky Wolf Rocket Kit

    The split-fin Sky Wolf is a high-performance, mid-power rocket.  Sleek and strong, with a 29mm motor mount, the Sky Wolf flies on D through H motors.

    The Sky Wolf kit features pre-cut plywood fins, heavy-duty body tubes, a Kevlar shock cord, a nylon parachute, and a vinyl decal.

    Produced to commemorate the 2015 National Sport Launch, this is a limited edition kit.

    Grail SA-7 (USSR) Model Rocket Kit (OOP)

    The Launch Pad Grail SA-7 (USSR) Model Rocket Kit (OOP)

    This scale model kit of the USSR's shoulder-launch missile is out of production, but still in the original packaging.


Copyright © 2019 JonRocket.com LLC