Categories
New Products
OE25-18
Aerospace Speciality Products Hang Time Over Easy Competition 1/4 mil Aluminized Polyester Parachute 18 inch
This 18-inch Aluminized Polyester parachute is recommended for use with rockets weighing into 16 ounces. This "Over Easy" parachute is designed for...
Model: OE25-18
1 Units in Stock
$8.49
In Stock: 1
OE25-15
Aerospace Speciality Products Hang Time Over Easy Competition 1/4 mil Aluminized Polyester Parachute 15 inch
This 15-inch Aluminized Polyester parachute is recommended for use with rockets weighing 16 ounces to 1.75 pounds. This "Over Easy" parachute is...
Model: OE25-15
4 Units in Stock
$6.79
In Stock: 4
PCR 50/2.6
Centering Ring - BT-50 in BT-2.6 (Plywood )- Model Rocket Part
This is a plywood centering ring for centering a single BT-50 body tube or motor tube in a BT-2.6 (or BT-80) body tube. Outside Diameter: 2.55 inches...
Model: PCR 50/2.6
180 Units in Stock
$2.25 $1.58
Save: 30% off
Save: 30% off
In Stock: 180
WASH14
1/4" SAE Zinc Washers (Package of 5)
This is a package of five 1/4" zinc-plated steel washers. Nominal Bolt Size: 1/4" Inside Diameter (ID): 9/32" (0.276" – 0.296") Outside...
Model: WASH14
20 Units in Stock
$1.29
In Stock: 20
EH475
Engine Hook - 4.75" - Model Rocket Part
Engine hooks are used to hold the model rocket motor in place so it isn't pushed out of the rocket when the motor's ejection charge fires. These...
Model: EH475
40 Units in Stock
$1.75
In Stock: 40
SE10016
Screw Eye - 3/32" Eye ID - 1 3/16" Long - Package of 5
This is a package of five zinc-plated steel screw eyes. Wire Size: W12 (approximately 0.105" or 2.7 mm diameter) Eye Inside Diameter: 3/32" ...
Model: SE10016
180 Units in Stock
$2.50
In Stock: 180
658
Estes Super Salamander
The Estes Super Salamander brings four-engine cluster power to the launch field in a rocket built to make an entrance. Standing 36.9 inches tall with...
Model: 658
1 Units in Stock
$49.99
[Add to cart to see our price]
In Stock: 1
171951
Aerospace Speciality Products Versi-Loader 2 Balsa Fin Set
Set of three laser cut balsa clipped delta fins as used by the ASP Versi-Loader 2 kit (the kit uses two sets). The root edge of each fin is about 1.5-...
Model: 171951
100 Units in Stock
$3.00
In Stock: 100
EH-EASY
Easy Release Engine Hook - 2.75" Standard Length - Model Rocket Part
Engine hooks are used to hold the model rocket motor in place so it isn't pushed out of the rocket when the motor's ejection charge fires. This is an...
Model: EH-EASY
250 Units in Stock
$1.99
In Stock: 250
JR-PARA-50
Bulk Sheets For 12, 15, or 18-inch Parachute (Package of 50)
Create your own plastic parachutes with this package of fifty (50) pre-printed polyethylene sheets which have just the right thickness and smoothness...
Model: JR-PARA-50
45 Units in Stock
$60.00
In Stock: 45