Your Shopping Cart is empty

Recovery = Streamer

    D-Region Tomahawk (13mm) Model Rocket Kit

    Aerospace Speciality Products D-Region Tomahawk (13mm) Model Rocket Kit

    The D-Region Tomahawk was flown early in 1968. The rocket flew into the "D" layer of the ionosphere, thus the name "D-Region." Tomahawk rockets are used to this day as the upper stage of many sounding rocket flights.

    The D-Region Tomahawk has long been a favorite of scale modelers. ASP's "peanut scale" kit flies on 13mm mini-engines and features basswood fins, balsa nose cone, decals, and streamer recovery.

    ISQY Tomahawk (13mm) Model Rocket Kit

    Aerospace Speciality Products ISQY Tomahawk (13mm) Model Rocket Kit

    The first IQSY (International Quiet Sun Year) Tomahawk was first flown in 1963. Four single stage flights took place between 1963 and 1964. The Tomahawk served as the upper stage of many Nike Tomahawk flights during the International Quiet Sun Year (IQSY) of 1964 - 1965.

    The IQSY Tomahawk has long been a favorite subject for scale modelers. ASP's mini-engine kit features basswood fins, balsa nose cone and decals. A bright plastic streamer brings the model back to earth for repeated missions.

    Micro RP-3 Model Rocket Kit

    Aerospace Speciality Products Micro RP-3 Model Rocket Kit

    The RP-3 was a Polish unguided experimental rocket used for such diverse purposes as wind studies and carrying "Rocket Mail." The RP-3 was first built in 1963 and stood over seven feet tall.

    ASP's scale model of the RP-3 is just under 5" tall and flies on Quest Micro Maxx motors. The kit includes a Kevlar shock cord, metallized polyester streamer, water-slide decals, and complete instructions.

    Micro Sonda II B Model Rocket Kit

    Aerospace Speciality Products Micro Sonda II B Model Rocket Kit

    The Sonda II B is the largest of Brazil's series of Sonda II sounding rockets. The Sonda II was first flown during the early 1970s and continues in use today.

    ASP's scale model of the Sonda II B is just over 5" tall and flies on Quest Micro Maxx motors. The kit includes a Kevlar shock cord, metallized polyester streamer, water-slide decals, and complete instructions.

    Sandia Sandhawk (13mm) Model Rocket Kit

    Aerospace Speciality Products Sandia Sandhawk (13mm) Model Rocket Kit

    The Sandia Sandhawk was developed as an upper stage for sounding rocket systems. The Sandhawk flew three times as a single stage rocket between 1966 and 1974.

    ASP's "Peanut Scale" model features basswood fins, balsa nose cone, wire antennas, and decals. This great looking model flies on mini A motors.

    That Tube Rocket (18mm) Model Rocket Kit

    Aerospace Speciality Products That Tube Rocket (18mm) Model Rocket Kit

    ASP's That Tube Rocket flies without the use of standard fins. Very easy to build, That Tube Rocket includes a quick-change engine hook that makes it easy to fly over and over. Features ASP's usual top-quality components and outstanding instructions.

    Theta 13 Model Rocket Kit

    Aerospace Speciality Products Theta 13 Model Rocket Kit

    ASP's Theta 13 is an easy-to-build kit for beginners and a great sport flier for modelers of any experience level. With laser-cut balsa fins, a balsa nose cone, and streamer recovery, the Theta 13 flies on economical 13mm "Mini" engines.

    Theta 18 Model Rocket Kit

    Aerospace Speciality Products Theta 18 Model Rocket Kit

    ASP's Theta 18 is an easy-to-build kit for beginners and a great sport flier for modelers of any experience level. With laser-cut balsa fins, a balsa nose cone, and streamer recovery, the Theta 18 flies on standard 18mm engines.

    Two High (18mm) Model Rocket Kit

    Aerospace Speciality Products Two High (18mm) Model Rocket Kit

    This is an easy to build two-stage kit with laser-cut balsa fins and a balsa wood nose cone. The rocket can be built with either three or four fins per stage. A fun, high flyer, the Two High is a great introduction to staging and is ideal if you are following the NARTREK program.

    A.T.W. Model Rocket Kit

    Custom Rocket A.T.W. Model Rocket Kit

    The ATW is a scale-like model of the Army's next-generation ultra powerful anti-tank weapon. Features include an injection-molded plastic nose cone, die-cut balsa fins, streamer recovery, and pressure-sensitive decals.

    Aztec Model Rocket Kit

    Custom Rocket Aztec Model Rocket Kit

    The Aztec is a fun two-stage rocket which flies almost half a mile into the sky. Features an injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, and pressure sensitive decals.

    Galaxy Patrol Model Rocket Kit

    Custom Rocket Galaxy Patrol Model Rocket Kit

    Keeping our universe safe since 2080. Features injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, quick-release engine mount, and detailed pressure-sensitive decals.

    Galaxy Rescue Model Rocket Kit

    Custom Rocket Galaxy Rescue Model Rocket Kit

    First on the scene of any emergency. Features injection-molded plastic nose cone, laser-cut balsa fins, and streamer recovery. Impressive self-adhesive decals and quick-release engine mount. Super high flier can reach altitudes over 1,000 feet.

    Galaxy Taxi Model Rocket Kit

    Custom Rocket Galaxy Taxi Model Rocket Kit

    Space taxi! Small details make this an excellent display model for your collection. Features injection-molded plastic nose cone, quick-release engine mount, laser-cut balsa fins, streamer recovery, and large pressure-sensitive decal.

    Game Over Model Rocket Kit

    Custom Rocket Game Over Model Rocket Kit

    Flashback to the early 80s with Custom's Game Over flying model rocket kit. The 8-bit graphics on the decals remind us of the decade of video games and MC Hammer pants. This kit features an injection nose cone, laser-cut fins, streamer recovery, pressure-sensitive decals, and a quick-release engine mount. Flights over 1000 feet are possible.

    M320 Model Rocket Kit

    Custom Rocket M320 Model Rocket Kit

    The M320 is a scale-like missile. The kit features an injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, pressure-sensitive decals, and quick-release engine mount.

    P.O.N.G. Model Rocket Kit

    Custom Rocket P.O.N.G. Model Rocket Kit

    The ninth galaxy is protected by a fleet of these craft. Protectors Of Ninth Galaxy, or P.O.N.G for short, uses mid-body separation and flies under mini-engine power. Recovery is by streamer and it will fly over 500 feet. Another unique feature is that it uses a ping pong ball for the nose cone. Add this one to your collection if you want something different.

    Gumball-Lofting Vehicle (Gb-LV) Model Rocket Kit

    Dr. Zooch Gumball-Lofting Vehicle (Gb-LV) Model Rocket Kit

    Dr. Zooch's Gumball-Lifting Vehicle (or "Gb-LV" for short) features a clear nosecone capsule which you may use to carry a bug, gummy bear, or  other small object into the sky. The capsule then returns on its own parachute while the booster returns by a streamer.

    "Young Astronauts Club" Cadet Model Rocket Kit (OOP, 1987)

    Estes "Young Astronauts Club" Cadet Model Rocket Kit (OOP, 1987)

    Estes released the Cadet kit in 1987 to support the "Young Astronauts Club." This kit is no longer in production. It is in good condition and is still-sealed in the original packaging.

    Based on the Blazer kit, this kit features die-cut fiber fins and streamer recovery.

    Established in 1984 by the White House, the Young Astronauts Council uses space to promote interest in science, math, and technology among young people. The Council supports local Young Astronauts Chapters around the world as well as the "Young Astronauts Club" for individual memberships. The Council is a non-profit organizationand receives no government funding. It is funded by membership fees paid by its official chapters. Chapters and Club (individual) members receive official Young Astronaut membership cards and certificates containing a seal that was flown in space aboard the space shuttle.

    3 Bandits Model Rocket Kits

    Estes 3 Bandits Model Rocket Kits

    The Estes 3 Bandits assortment includes three easy-to-assemble mini-engine rockets.

    • Length - 10.8 in. to 11.1 in. (27.4 to 28.3 cm)
    • Diameter - .74 in. (19 mm)
    • Estimated Weight - .6 to .71 oz (19.8 to 20.1 g)
    • Plastic fins, self-stick decals, 6 in. (15.2 cm) parachute recovery
    Firestreak SST Model Rocket Kit

    Estes Firestreak SST Model Rocket Kit

    The Firestreak SST is a "Simple Snap-Together" model rocket kit. About 10" long, this plastic kit can be assembled and ready to fly in 15 minutes.

    Gnome Model Rocket Kit

    Estes Gnome Model Rocket Kit

    The Gnome is just a little over 10 inches tall with a shiny chrome body tube and blue nose cone and fins. This great-looking, mini-engine powered cloud chaser can reach altitudes of well over 800 feet. Recovery is fast and reliable with its fluorescent streamer.

    The Gnome is one of the Estes E2X (Easy to Assemble) series of kits and features a single piece, chrome wrapped body tube, a bright blue precolored fin unit, nose cone, and upper launch lug ring. The rocket takes about 30 minutes to build and is finished off with a colorful, easy-to-apply self-stick decal. With its simple assembly and precolored parts, it's an excellent choice for the first time rocketeer.

    Goblin Model Rocket Kit

    Estes Goblin Model Rocket Kit

    Estes has brought back another classic model rocket kit. The Estes Goblin first appeared in the early 1970s and has remained a favorite of rocketry modelers through the decades.

    Hi-Flier Model Rocket Kit

    Estes Hi-Flier Model Rocket Kit

    The Estes Hi-Flier is one of the most extreme, super performance model rockets you can own. The Hi-Flier can easily be built in one afternoon. The Estes Hi-Flier isis capable to flights over 1,600 feet and recovers with a fluorescent orange streamer.

    Mini Comanche 3 Model Rocket Kit

    Estes Mini Comanche 3 Model Rocket Kit

    The Mini Comanche 3 is a smaller version of the popular three-stage Comanche 3 rocket. This version flies on mini-engines and can be flown as a single-stage, a two-stage, or a three-stage rocket.

    Mini Max Model Rocket Kit

    Estes Mini Max Model Rocket Kit

    Estes has created a smaller version of their classic Der Red Max kit. Just like the Der Red Max, the Mini Max is uniquely designed. It has the same ballistic-shaped nose cone and stubby fins as its bigger counterpart. Standing almost 10 inches tall, this miniature version definitely has a personality all its own!

    Powered by Estes mini engines,the Mini-Maxcan reach amazing heights of 400 feet. After its aerial assault, recovery is accomplished with a high-vizability streamer.

    The new Mini Max has all the great looks of the classic version, right down to the really cool skull and crossbones decals.The Mini features a balsa nose cone, laser cut balsa fins and waterslide decals.

    Puma RTF Model Rocket Kit

    Estes Puma RTF Model Rocket Kit

    The mini-engine Estes Puma can reach altitudes of well over 800 feet . Recovery is reliable with its fluorescent streamer for easy tracking!

    The Estes Puma is a brightly colored, ready to fly, mini engine powered speedster. The slender, long lines of this rocket provide the beginning or seasoned rocketeer a high intensity model rocket flying experience! The Puma is just a little over 10 inches tall and is factory assembled and decorated. This mini engine powered cloud chaser can reach altitudes of well over 800 feet. Recovery is safe and reliable with its fluorescent colored streamer for easy tracking after a ballistic flight! The Puma is high performance model rocket flying fun of the easiest kind. It's a great rocket to take to the flying field when you are short on time, but want to fly! For cloud scratching performance, get the Puma ready to fly rocket.

    Reliant Model Rocket Kit (OOP)

    Estes Reliant Model Rocket Kit (OOP)

    Estes produced the Reliant from about 1993 to 1997. It's a nice-looking Skill Level 1 rocket with die-cut fins.

    This kit is out of production and supplies are limited.

    Star Trooper Model Rocket Kit

    Estes Star Trooper Model Rocket Kit

    The Estes Star Trooper is a new version of the classic Centuri kit.

    Cruise the galaxy in style with the Star Trooper. This small rocket is able to fly up to 900 feet. It is a great rocket for beginners or any rocketeer looking to spice up their collection.

    Super Neon Model Rocket Kit

    Estes Super Neon Model Rocket Kit

    The Estes Super Neon features special "tubular flight stabilizers" which will make this rocket a favorite to build and fly. Watch the Super Neon model rocket soar to heights of almost 1000 feet using standard Estes motors.

    UP Aerospace Spaceloft Model Rocket Kit Bulk Pack (12)

    Estes UP Aerospace Spaceloft Model Rocket Kit Bulk Pack (12)

    The Estes Spaceloft is an easy to assemble flying model rocket based on the design of the UP Aerospace Spaceloft XL sounding rocket.

    This is a bulk package of 12 rocket kits.

    Viking Model Rocket Kit

    Estes Viking Model Rocket Kit

    The Estes Viking rocket offers 48 possible fin configurations and flies on standard model rocket engines. The Viking is a good kit for the beginner.

    Wizard Model Rocket Kit

    Estes Wizard Model Rocket Kit

    The Estes Wizard is an easy-to-assemble, Skill Level 1 kit with a one-piece body tube, laser-cut wood fins, and a bullet-shaped plastic nose cone. The self-stick decals are sure to make this mystic rocket the envy of everyone at your local launch field. The Wizard is a great rocket for beginners, schools, clubs and rocket demonstrations.

    Zinger Model Rocket Kit (OOP)

    Estes Zinger Model Rocket Kit (OOP)

    Estes last produced the Zinger kit in the late 1990s. This out-of-production model rocket kit is easy-to-build and flies on standard motors.

    Cheetah Model Rocket Kit

    FlisKits Cheetah Model Rocket Kit

    Named for the fastest land animal, the Cheetah is a sleek, two-stage rocket.

    Diminutive Deuce Model Rocket Kit

    FlisKits Diminutive Deuce Model Rocket Kit

    FlisKits has produced a MicroMaxx version of their popular canted-motor Deuces Wild.  The tiny Diminutive Deuce flies on a cluster of two MicroMaxx motors.

    Honest John Model Rocket Kit

    FlisKits Honest John Model Rocket Kit

    The Honest John (not Jon) is a scale Micromaxx rocket.  The 1:61 scale Honest John missile features laser-cut 1/16" thick basswood fins.

    Mercury Redstone Scale Model Rocket Kit

    FlisKits Mercury Redstone Scale Model Rocket Kit

    FlisKit's 1/130 sport-scale model of the Mercury Redstone offers enough detail to satisfy any scale enthusiast while remaining easy enough to build for anyone with basic model rocket building experience.

    Featuring laser cut fins and fin details, a highly detailed balsa nose cone and water slide decals, she is a beauty when finished and looks great on display and in the air! Streamer recovery brings her back safely but with little chance of drifting away. The provided paper-wrap Launch Escape Tower provides just enough detail to look sharp without forcing you to assemble a complex tower under a magnifying glass!

    Big Betty Model Rocket Kit

    Quest Aerospace Big Betty Model Rocket Kit

    Quest's Big Betty is a large, easy-to-build rocket. With balsa fins and a plastic nose cone, the Big Betty "flies like a dream."

    Totally Tubular Model Rocket Kit

    Quest Aerospace Totally Tubular Model Rocket Kit

    Quest's Totally Tubular utilizes tube fin stabilization. It is very easy to build. All of the tubes are pre-colored and the decals are self-adhesive for easy application. With streamer recovery, this is a great small-field flier.

    Red Eye Model Rocket Kit

    Semroc Red Eye Model Rocket Kit

    The Red-Eye kit was originally released in 1980 by Centuri Engineering Company as the enemy satellite for their new Satellite Killer. Both of these models were a part of their “War in Space” series. Since these were done in the final days of Centuri, as a separate company from Estes Industries, there were no later entries. The Red-Eye was an “upscale” of the earlier Satellite 62SL and used the same fiber fin sheets. It was released as Catalog Number 5346 and had an introductory price of $2.00.

    The Semroc Retro-Repro Red-Eye is updated with laser-cut fins. The original plastic nose cone is replaced with balsa. The engine mount is added to work with a wide range of mini-engines instead of a standard 1/2A6 engine.



Copyright © 2017 JonRocket.com LLC