Your Shopping Cart is empty

Decals = Self-Stick

    Aerobee 300 Model Rocket Kit

    Aerospace Speciality Products Aerobee 300 Model Rocket Kit

    The Aerobee 300, or "Spaerobee", was first flown in 1958. Eleven were flown by the Air Force and Navy with the last taking flight in 1965. The Aerobee series of rockets was designed by Aerojet General and is considered a descendant of the WAC Corporal.

    Aerobee rockets have long been a favorite of scale modelers, and the Aerobee 300 has been an especially popular prototype. ASP's kit is 1.89" in diameter and over three feet tall! The kit features through-the-wall laser-cut plywood fins (with optional balsa laminations), balsa nose cone and transition, pre-rounded basswood conduits, steel cable shock cord mount and water slide and self-adhesive decals.

    Makes a great intro to mid-power rocketry and flies fantastic (and high!) on 29mm F and G engines! This model can reach some impressive altitudes, especially with G engines. The kit has an accurate scale outline but is also a fairly easy build that leaves room for the modeler to add additional details if desired.

    A parachute is not included with this kit. We recommend a 24" nylon parachute.

    Black Brant IV Model Rocket Kit

    Aerospace Speciality Products Black Brant IV Model Rocket Kit

    The Black Brant IV is a Canadian sounding rocket designed to launch payloads to over 500 miles high. First flown in 1964, the two-stage rocket was used into the 1980's. Over fifty flew from launch sites all over the world, including Peru, Spain, Norway, Greenland, and the U.S. among others.

    ASP's single-stage scale kit is nearly three feet tall and features a balsa transition and hard balsa nose cone, laser-cut basswood fins, water-slide and self-adhesive decals, and a quick-change engine hook. You can fly this model on a wide range of engines, with fairly low altitudes on a C, but practically out-of-sight flights on an E! Designed primarily for 24mm C, D & E engines, it can also be flown on selected 18mm engines with an adapter (not included). A bright metallic parachute returns it to the ground for flight after flight.

    D-Region Tomahawk (29mm) Rocket Kit

    Aerospace Speciality Products D-Region Tomahawk (29mm) Rocket Kit

    The D-Region Tomahawk was flown early in 1968. This vehicle was intended to fly to the D layer of the ionosphere, thus the name "D-Region". Tomahawk rockets are used to this day as the upper stage of many sounding rocket flights.

    The D-Region Tomahawk has long been a favorite of scale modelers. This new kit from ASP is over three feet tall and features through-the-wall laser-cut plywood fins, a balsa nose cone, a steel cable shock cord mount, and self-adhesive decals.

    This kit makes a great intro to mid-power rocketry and flies fantastic on 29mm F and G engines. ASP's kit provides an accurate scale outline, but is fairly easy to build leaving room for the modeler to add additional details if desired.

    A parachute is not included with this kit. A 24" nylon 'chute is recommeded.

    RAM B (18mm) Model Rocket Kit

    Aerospace Speciality Products RAM B (18mm) Model Rocket Kit

    The RAM ("Radio Attenuation Measurement") B was a three-stage rocket designed to study communications during reentry after a lunar voyage.

    ASP's single-stage "Fun Scale" model of the RAM B captures the general apperance of the real vehicle, yet is easy enough for the novice modeler. Includes trim tape and self-adhesive trim material to simplify painting and detailing.

    Sandia Sandhawk (29mm) Rocket Kit

    Aerospace Speciality Products Sandia Sandhawk (29mm) Rocket Kit

    The Sandia Sandhawk has long been a favorite of scale modelers. The Sandia Sandhawk was developed as an upper stage for sounding rocket systems. The Sandhawk flew three times as a single-stage rocket between 1966 and 1974.

    ASP's new kit is over 3 1/2 feet tall and features through-the-wall laser-cut plywood fins, a balsa nose cone, wire antennas, a steel cable shock cord mount, and self-adhesive decals. The Sandia Sandhawk kit is a great intro to mid-power rocketry and flies fantastic on 29mm F and G engines. This kit provides an accurate scale outline, but is fairly easy to build and leaves room for the modeler to add additional details if desired.

    A parachute is not included with this kit. A 24" nylon 'chute is recommended.

    Freestyle Model Rocket Kit

    Custom Rocket Freestyle Model Rocket Kit

    Colorful graphics set the Custom Rocket Freestyle kit apart from the rest. The kit includes an injection-molded nose cone, quick-release engine mount, laser-cut balsa fins, a 12" parachute and self-adhesive decals. Flights to 750 feet.

    Galaxy Patrol Model Rocket Kit

    Custom Rocket Galaxy Patrol Model Rocket Kit

    Keeping our universe safe since 2080. Features injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, quick-release engine mount, and detailed pressure-sensitive decals.

    Landviper Model Rocket Kit

    Custom Rocket Landviper Model Rocket Kit

    The Landviper is a big, three-engine cluster rocket. The kit features a blow-molded plastic nose cone, six die-cut balsa fins, an 18" parachute, self-adhesive decals, and complete cluster instructions.

    Sport Model Rocket Kit

    Custom Rocket Sport Model Rocket Kit

    The super-long Sport from Custom Rocketry provides slow, realistic lift-offs. Easy to build and fly, this almost 2 1/2-foot tall rocket makes a great beginner kit. Features include an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, a pressure sensitive decal, and a quick-release engine mount. Flights of over 750 feet are possible on a C6-5 motor.

    220 Swift Model Rocket Kit

    Estes 220 Swift Model Rocket Kit

    Is it okay to describe a rocket as "cute?" If so, then the Estes 220 Swift is cute. This tiny powerhouse rushes into the sky on a mini-motor then tumbles back to earth ready to fly again.

    AGM-57X Heatseeker Model Rocket Kit

    Estes AGM-57X Heatseeker Model Rocket Kit

    This scale-like model rocket kit is easy-to-assemble with no painting required.

    Airwalker Model Rocket Kit

    Estes Airwalker Model Rocket Kit

    This is a "reintro" of the popular Air Walker model rocket kit from Estes. A clear payload section adds to the fun of this rocket. Building remains the same as the original kit and is easy to build no matter what your experience level. Have this rocket on the launch pad in a quick afternoon and enjoy countless launches.

    Alpha VI Model Rocket Kit

    Estes Alpha VI Model Rocket Kit

    The Alpha VI is a special limited-edition of the classic Alpha series of rockets. Commemorating the 60th anniversary of Estes, this kit features colorful self-stick decals.

    Baby Bertha Model Rocket Kit

    Estes Baby Bertha Model Rocket Kit

    The Baby Bertha is a pint-sized version of the classic Big Bertha. At just under 13 inches, the Baby Bertha is about half the size of it's larger cousin. The Baby Bertha kit features laser-cut fins, a plastic nose cone, self-stick decals, and a colorful 12-inch pre-assembled parachute.

    Big Bertha Model Rocket Kit

    Estes Big Bertha Model Rocket Kit

    The Big Bertha is a classic Estes kit. Designed by Vern Estes himself, this is one of the largest Skill Level 1 rockets. it is a great beginenr's rocket. The Big Bertha is terrific for demonstractions as its large size and steady flights on smaller motors provide slow, realistic lift-offs.

    CC Express Model Rocket Kit

    Estes CC Express Model Rocket Kit

    The Estes CC Epress is multi-staging at its best. The CC Express has blistering performance and great looks. It features a one-piece body tube, molded plastic nose cone, and laser-cut wood fins for easy assembly. The self-stick decals will make this high altitude specialist a real stand out at any launch site. The CC Express is a must have for any rocket enthusiast looking for ultimate, high flying excitement!

    Color the Sky Crayon Rockets Bulk Pack (12)

    Estes Color the Sky Crayon Rockets Bulk Pack (12)

    The Estes Color The Sky collection includes twelve crayon-themed rocket kits - each a different color.

    Each kit is easy-to-assemble with plastic fins and nose cone, self-stick decals, and a plastic parachute.

    This is a bulk package of twelve (12) kits.

    Cosmic Cobra Model Rocket Kit

    Estes Cosmic Cobra Model Rocket Kit

    You'll be amazed when the rocket returns to earth with a parachute while the nose cone helicopters down.

    The Cosmic Cobra streaks to altitudes over 500 feet high. Two recovery devices are used to tame this reptile. The main rocket, with upswept fins, returns to earth on a colorful 12 inch parachute while the sleek nose cone helicopters down on bright colored, retractable rotor blades. Assembly of the Cobra takes about one hour or less, making it a great choice for any beginner! You'll draw a crowd at the flying field when you blast this unique rocket into space!

    Crossfire ISX Model Rocket Kit

    Estes Crossfire ISX Model Rocket Kit

    Prioviously only available in a launch set, the Estes Crossfire ISX is, perhaps, the coolest looking beginner's kit in Estes's catalog. With laser-cut wood fins and bright, self-stick decals, the Crossfire ISX flies on standard-size motors and is recovered by parachute.

    Eggscaliber Model Rocket Kit

    Estes Eggscaliber Model Rocket Kit

    The Estes Eggscaliber has a special clear payload section which holds an egg. With the included engine adapter, it can fly on B/C or D/E motors.

    A motor adapter is included so you can launch your rocket on standard Estes engines or remove the adapter to fly the rocket on more powerful D or E engines. The Eggscaliber with its large payload section is also great for science experiments. The Eggscaliber is a Skill Level 2 kit which requires more skills in building and painting.

    Use of an E motor requires a larger launch pad such as the Estes Porta-Pad E and a more-powerful launch controller such as the Estes E Launch Controller. The launch pad and controller ore sold separately.

    Eggs (and bacon) not included.

    Recommended Motors (with egg): B6-2, C6-3, C11-3, D12-3, E9-4
    Recommended Motors (no egg): B4-2, B6-2, C6-5, D12-5, E9-6

    Eliminator Model Rocket Kit

    Estes Eliminator Model Rocket Kit

    The Estes Eliminator is a super high performance model rocket design intended for high altitude, cloud punching flying on our powerful E engines! The rocket is almost 31 inches tall and features purple wrapped body tubes and a one piece molded fin set that can handle all the power an E can deliver. A bright yellow nose cone sits atop the rocket while the tribal looking self-stick decals add to its visibility...which you're going to need as the E engine pushes this beast up to 1,400 feet.

    Assembly of this high performance hot rod takes about an hour. When completed you'll be ready for the flight pad for some serious high altitude, blistering fast model rocket flying. Recovery is accomplished using a colorful 12 inch, preassembled parachute for soft landings. Includes an adapter that allows you to quickly convert from E to D engine power.

    Eliminator XL Launch Set

    Estes Eliminator XL Launch Set

    The Estes Eliminator XL rocket stands 44 inches tall. Assembly is easy, just twist the sections together. The Eliminator XL is ready to launch in just a few minutes.

    This set includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. A 3/16-inch Maxi Launch Rod is also included.

    Engines, batteries, and other supplies are not included.

    Executioner Model Rocket Kit

    Estes Executioner Model Rocket Kit

    The Execution is over 36" tall and flies on powerful D and E motors. The kit includes a slotted body tube and laser-cut wood fins.

    Firestreak SST Model Rocket Kit

    Estes Firestreak SST Model Rocket Kit

    The Firestreak SST is a "Simple Snap-Together" model rocket kit. About 10" long, this plastic kit can be assembled and ready to fly in 15 minutes.

    Freefall Model Rocket Kit

    Estes Freefall Model Rocket Kit

    The Freefall is easy to assemble and includes a parachute man with his own parachute for recovery. Standard engine powered, the Freefall can reach 575 feet.

    Galaxy Glow Model Rocket Kit

    Estes Galaxy Glow Model Rocket Kit

    The Estes Galaxy Glow model rocket kit is a perfect S.T.E.M. adventure for the first-time rocketeer. Experience the thrill of building and flying your own high-performance model rocket with minimal waiting. This rocket is as much fun to build as it is to fly

    In addition to the fun and excitement of building, launching, and recovery of your own model rocket, the high-flying Galaxy Glow has significant STEM educational value. This ultra-sleek and colorful model rocket can provide some of the basic building blocks for understanding Newton’s Laws of Motion. The Galaxy Glow is a great looking, easy to assemble (E2X) model rocket kit that features a molded lime green nose cone, fin can, and fins, pre-colored body tube and self-stick decals. The kit can be assembled and ready to fly in about an hour. When launched with an Estes C6-7 engine, the almost 20” tall Galaxy Glow can reach heights of 1,100 feet and is easily recovered by its 12 inch parachute.

    Gnome Model Rocket Kit

    Estes Gnome Model Rocket Kit

    The Gnome is just a little over 10 inches tall with a shiny chrome body tube and blue nose cone and fins. This great-looking, mini-engine powered cloud chaser can reach altitudes of well over 800 feet. Recovery is fast and reliable with its fluorescent streamer.

    The Gnome is one of the Estes E2X (Easy to Assemble) series of kits and features a single piece, chrome wrapped body tube, a bright blue precolored fin unit, nose cone, and upper launch lug ring. The rocket takes about 30 minutes to build and is finished off with a colorful, easy-to-apply self-stick decal. With its simple assembly and precolored parts, it's an excellent choice for the first time rocketeer.

    Guardian Model Rocket Kit (Non-Retail Packaging)

    Estes Guardian Model Rocket Kit (Non-Retail Packaging)

    With a multi-fin design resembling a surface-to-air missile, the Guardian is a Skill Level 2 rocket with parachute recovery.

    This is a new kit, still sealed in clear packaging rather than fancy retail packaging.

    Hi-Flier Model Rocket Kit

    Estes Hi-Flier Model Rocket Kit

    The Estes Hi-Flier is one of the most extreme, super performance model rockets you can own. The Hi-Flier can easily be built in one afternoon. The Estes Hi-Flier isis capable to flights over 1,600 feet and recovers with a fluorescent orange streamer.

    Mix-n-Match 50 Model Rocket Kit

    Estes Mix-n-Match 50 Model Rocket Kit

    The Mix-n-Match 50 set includes parts to build three colorful rockets. All parts are pre-colored, so no painting is required. Two sheets of self-stick decals are included.

    The Mix-n-Match 50 includes BT-50 (0.976 inch diameter) parts:

    • Three nose cones and nose cone inserts
    • Six pre-colored BT-50 (.98 in diameter) body tubes
    • Three body tube connecters
    • Three fin can units
    • Twelve fins in three different styles
    • Three launch lugs and clear reinforcements
    • Three shock cords
    • Three pre-assembled parachutes
    • Two self-stick decal sheets
    Phoenix Bird Model Rocket Kit

    Estes Phoenix Bird Model Rocket Kit

    Based on the classic Centuri Phoenix Bird kit from the late 1970s, the new Estes Phoenix Bird features through-the-wall fins and self-stick foil decals.

    Puma RTF Model Rocket Kit

    Estes Puma RTF Model Rocket Kit

    The mini-engine Estes Puma can reach altitudes of well over 800 feet . Recovery is reliable with its fluorescent streamer for easy tracking!

    The Estes Puma is a brightly colored, ready to fly, mini engine powered speedster. The slender, long lines of this rocket provide the beginning or seasoned rocketeer a high intensity model rocket flying experience! The Puma is just a little over 10 inches tall and is factory assembled and decorated. This mini engine powered cloud chaser can reach altitudes of well over 800 feet. Recovery is safe and reliable with its fluorescent colored streamer for easy tracking after a ballistic flight! The Puma is high performance model rocket flying fun of the easiest kind. It's a great rocket to take to the flying field when you are short on time, but want to fly! For cloud scratching performance, get the Puma ready to fly rocket.

    Show Stopper Model Rocket Kit

    Estes Show Stopper Model Rocket Kit

    The Estes Show Stopper is almost ready to fly when you receive it.  It features a bright chrome body and files on 24mm C and D motors for impressive lift-offs.

    Shuttle Xpress Model Rocket Kit

    Estes Shuttle Xpress Model Rocket Kit

    The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.

    The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.

    After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!

    The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.

    Sky Cruiser Model Rocket Kit

    Estes Sky Cruiser Model Rocket Kit

    The Estes Sky Cruiser is an easy-to-assemble model rocket kit featuring a plastic fin unit and self-stick decals.

    Sky Hawker Model Rocket Kit

    Estes Sky Hawker Model Rocket Kit

    The Sky Hawker is a ready-to-fly rocket with a 12-inch parachute.

    Viking Model Rocket Bulk Pack (12 Kits)

    Estes Viking Model Rocket Bulk Pack (12 Kits)

    The Estes Viking can be easily assembled with 48 possible different fin configurations. The kit\'s five special, die-cut card stock fins allow you to create a rocket that\'s truly unique. Take your pick on how you want your rocket to look; fins up, fins down or fins whatever way. You call it, it\'s your day to be the rocket designer.

    Customize your own rocket...no matter how you place the fins, it still offers the ultimate in high performance model rocket flight. This Skill Level 1 rocket kit includes a single-piece body tube, molded nose cone, and self-stick decals.

    The Viking is just over 12 inches tall. When flown on standard engines, the Viking is able to reach amazing launch heights over 1600 feet and land safely with its bright orange streamer.

    The versatile Viking can be built in an afternoon and is a great rocket for beginners, class projects, clubs and rocket demonstrations.

    Wacky Wiggler Model Rocket Launch Set

    Estes Wacky Wiggler Model Rocket Launch Set

    The Wiggler has arrived! This launch set includes a launch pad, launch controller, and the Wacky Wiggler rocket.

    Estes's Wacky Wiggler rocket features "break-apart" recovery.

    The easy-to-build Wacky Wiggler will give you hours of rocket launching fun. The Wiggler launches as a normal rocket, but comes down in several pieces connect by a shock cord. The kit features pre-colored parts including body tube segments featuring a silver holographic pattern which is super shiny and easy to see in the sky.

    Wizard Model Rocket Kit

    Estes Wizard Model Rocket Kit

    The Estes Wizard is an easy-to-assemble, Skill Level 1 kit with a one-piece body tube, laser-cut wood fins, and a bullet-shaped plastic nose cone. The self-stick decals are sure to make this mystic rocket the envy of everyone at your local launch field. The Wizard is a great rocket for beginners, schools, clubs and rocket demonstrations.

    Yankee Model Rocket Kit

    Estes Yankee Model Rocket Kit

    The Estes Yankee is a rocket with an All-America decor and performance to match. On a C6-7 motor, it screams to 1400 feet in altitude.The Estes Yankee includes self-adhesive decals for that red, white and blue look.

    Zinger Model Rocket Kit (OOP)

    Estes Zinger Model Rocket Kit (OOP)

    Estes last produced the Zinger kit in the late 1990s. This out-of-production model rocket kit is easy-to-build and flies on standard motors.

    Batray Model Rocket Kit

    Madcow Rocketry Batray Model Rocket Kit

    Pre-cut plywood "bat" fins give the Madcow Batray its distinctive look. The Batray kit includes a heavy duty, pre-slotted body tube, a nylon parachute, a parachute protector, and a 29mm motor mount.

    Skipper Rocket Kit

    Madcow Rocketry Skipper Rocket Kit

    The balsa tailcone adds a touch of excitement to the Skipper's 3FNC design. This Madcow kit includes a plastic nose cone, laser-cut plywood parts, a 'chute protect, nylon parachute, and a vinyl decal.

    USS Enterprise Model Rocket Kit

    MPC USS Enterprise Model Rocket Kit

    MPC's USS Enterprise rocket is easy to build with two pre-decorated body tubes.  It is 28.71" (72.9cm) long with a diameter of 1.58" (40mm) and uses standard engines from Estes and Quest. The kit includes self-stick decals and a special parachute.

    Big Dog Model Rocket Kit

    Quest Aerospace Big Dog Model Rocket Kit

    The Big Dog stands over 32 inches tall. The kit features a blow-molded plastic nose cone, laser-cut balsa fins, and a rugged 29mm diameter motor mount. Flights with an Aerotech F32-6W will go to almost 3,000 feet. The Big Dogreturns to earth under a large 18" fabric parachute.

    The kit includes big, easy-to-apply self-adhesive decals. It also includes an engine adapter that allows you to use 24mm engines.

    Cobalt Model Rocket Kit

    Quest Aerospace Cobalt Model Rocket Kit

    Short, fat, and fun - the short length of this sporty little rocket makes it only flyable on A size engines unless you add nose weight (not included).

    Courier Model Rocket Kit

    Quest Aerospace Courier Model Rocket Kit

    We can't think of many other ways that you can send an egg sailing 400 ft into the air and return it safely (and in time for breakfast!) The specially designed nose capsule comes unpadded - requiring your students to experiment with various methods of protecting Mr. Egg. The Courier model rocket is a traditional balsa fin design and carries it's own dual parachute recovery.

    Flies with Quest B6-2, B6-4 and C6-3 rocket motors. Can also use Estes B6-2, B6-4 and C6-5 rocket motors.

    High-Q Model Rocket Kit

    Quest Aerospace High-Q Model Rocket Kit

    Quest's High-Q is a great looking and performing mid-size rocket. Over 30 inches tall, the kit features a blow-molded plastic nose cone, laser-cut balsa fins, and a rugged 29mm diameter motor mount. Flights with an Aerotech F32-6W will go to almost 3,000 feet. The High-Q then floats back to earth under an18" fabric parachute.

    The High-Q includes big, easy-to-apply self-adhesive decals. It also includes an engine mount adapter that allows you to use 24mm diameter engines.

    Lil' Grunt Model Rocket Kit

    Quest Aerospace Lil' Grunt Model Rocket Kit

    A short, fat stubby rocket powered by Estes D motors, the Lil' Grunt is one powerful little guy.

    Mean Green Model Rocket Kit

    Quest Aerospace Mean Green Model Rocket Kit

    Quest's Mean Green is aerodynamic and sleek - 24 inches of pure fast rocket. The kit features a blow molded plastic nose cone, laser-cut balsa fins and a rugged 24mm diameter motor mount. Flights with a D12-5 will go to almost 1,200 feet. The Mean Green will recover gently on the big 18-inch fabric parachute. Includes big, easy-to-apply self adhesive decals.

    Triton-X Model Rocket Kit

    Quest Aerospace Triton-X Model Rocket Kit

    The Quest Triton-X is a large, easy-to-build rocket. The transition and striking decal make this a cool-looking rocket.

    Daedalus Model Rocket Kit

    Rocketarium Daedalus Model Rocket Kit

    Rocketarium's Daedalus is a two-stage model rocket with self-adhesive decals, pre-cut fins, laser-cut plywood centering rings, translucent nose cone, and a 15" plastic parachute kit. Assembled, the Daedalus stands more than three feet tall.

    KSR-420S Scale Model Rocket Kit

    Rocketarium KSR-420S Scale Model Rocket Kit

    The KSR-420S Sounding Rocket is a Korean sounding rocket once used to gather data on ozone concentration over the Korean peninsula. The KSR-420S also carried a highly-specialized device to measure micro gravity. In somewhat less peaceful times, the KSR-420S could be modified to carry a 200kg destructive payload over a considerable distance.

    This sport-scale model of the KSR-420S flies on a cluster of three 18mm model rocket motors As a Skill Level 2 kit, the KSR-420S is easy to build. This makes it a great choice for rocketeers new to clustering.

    Little John Model Rocket Kit

    Rocketarium Little John Model Rocket Kit

    The US Army developed the Little John to deliver nuclear (and conventional) payloads.

    The Rocketarium sport-scale kit includes decals and decal placement instructions the black bands on the airframe. This is an easy-to-build, skill level 2 model rocket kit.

    The Little John kit is easy to build. If you can cut fins from balsa stock, you can build and enjoy this model rocket. Fin template is included.

    SkyFlash Model Rocket Kit

    Rocketarium SkyFlash Model Rocket Kit

    Rocketarium's SkyFlash is a semi-scale model of a semi-active radar homing air-to-air missile.The medium-range SkyFlash missile was deployed in a wide variety of configurations.

    Due to the large forward fins, the SkyFlash model rocket is best flown when there's little to no wind.

    Red Eye Model Rocket Kit

    Semroc Red Eye Model Rocket Kit

    The Red-Eye kit was originally released in 1980 by Centuri Engineering Company as the enemy satellite for their new Satellite Killer. Both of these models were a part of their “War in Space” series. Since these were done in the final days of Centuri, as a separate company from Estes Industries, there were no later entries. The Red-Eye was an “upscale” of the earlier Satellite 62SL and used the same fiber fin sheets. It was released as Catalog Number 5346 and had an introductory price of $2.00.

    The Semroc Retro-Repro Red-Eye is updated with laser-cut fins. The original plastic nose cone is replaced with balsa. The engine mount is added to work with a wide range of mini-engines instead of a standard 1/2A6 engine.

    NSL 2015 Commemorative Sky Wolf Rocket Kit

    SkyPyrates Rocketry NSL 2015 Commemorative Sky Wolf Rocket Kit

    The split-fin Sky Wolf is a high-performance, mid-power rocket.  Sleek and strong, with a 29mm motor mount, the Sky Wolf flies on D through H motors.

    The Sky Wolf kit features pre-cut plywood fins, heavy-duty body tubes, a Kevlar shock cord, a nylon parachute, and a vinyl decal.

    Produced to commemorate the 2015 National Sport Launch, this is a limited edition kit.



Copyright © 2019 JonRocket.com LLC