Your Shopping Cart is empty

Skill Level = 3

    WAC Corporal (Two Stage 24mm to 18mm) Model Rocket Kit

    Aerospace Speciality Products WAC Corporal (Two Stage 24mm to 18mm) Model Rocket Kit

    This detailed model features a balsa boattail, hard balsa nose cone, and laser-cut balsa fins. Using the "Pass - Port" staging method, a D12-0 booster fires an 18mm upper stage motor for impressive, two-stage flights. The upper stage may also be flown as a single stage model. Recommended for the advanced modeler.

    Landviper Model Rocket Kit

    Custom Rocket Landviper Model Rocket Kit

    The Landviper is a big, three-engine cluster rocket. The kit features a blow-molded plastic nose cone, six die-cut balsa fins, an 18" parachute, self-adhesive decals, and complete cluster instructions.

    Airborne Surveillance Missile Model Rocket Kit

    Estes Airborne Surveillance Missile Model Rocket Kit

    Estes introduced the Airborne Surveillance Missile kit in the early 1980s. Now they've brought back the military-style rocket. Flying on economical mini-engines, the ASM can reach alitudes of 300 feet or more.

    Astron Sky Dart II Model Rocket Kit

    Estes Astron Sky Dart II Model Rocket Kit

    Powered by standard engines, expect to be impressed with the glider flight of the Astron Skydart II. Absolutely the coolest glider rocket Estes makes, one minute duration glides are fully possible. Be the first on your block to get this cool rocket.

    Comanche-3 Model Rocket Kit

    Estes Comanche-3 Model Rocket Kit

    Estes has brought back the classic Comanche-3 multi-stage rocket kit.

    Eliminator Model Rocket Kit

    Estes Eliminator Model Rocket Kit

    The Estes Eliminator is a super high performance model rocket design intended for high altitude, cloud punching flying on our powerful E engines! The rocket is almost 31 inches tall and features purple wrapped body tubes and a one piece molded fin set that can handle all the power an E can deliver. A bright yellow nose cone sits atop the rocket while the tribal looking self-stick decals add to its visibility...which you're going to need as the E engine pushes this beast up to 1,400 feet.

    Assembly of this high performance hot rod takes about an hour. When completed you'll be ready for the flight pad for some serious high altitude, blistering fast model rocket flying. Recovery is accomplished using a colorful 12 inch, preassembled parachute for soft landings. Includes an adapter that allows you to quickly convert from E to D engine power.

    Little Joe I Model Rocket Kit

    Estes Little Joe I Model Rocket Kit

    The Little Joe booster was the first rocket designed solely for manned spacecraft qualifications and to measure critical parameters at higher altitudes. The Estes 1/34th scale Little Joe stands almost 18 inches tall and launches to 400 feet on a C6-5 engine. Other features include a plastic Mercury capsule and engine nozzles, precision laser-cut balsa, printed card-stock fins, high-quality waterslide decals, and a colorful 15-inch parachute for "safe reentry." The Little Joe 1 will soon be in stock for an exciting holiday gift that every rocketeer will want to build and proudly display.

    Lynx Model Rocket Kit

    Estes Lynx Model Rocket Kit

    Powered by the more-economical Estes mini-engines, the Lynx is a challenging kit to build that will reward you with its futuristic style and great flights.

    Magician Model Rocket Kit

    Estes Magician Model Rocket Kit

    Conjure up some special space magic with the Magician! No tricks up anyone's sleeve here, just a super high performance payload model rocket. The talented Estes rocket shop designers have spun their magic to create an enormous, supersized payload rocket. The Magician can handle all the power you put in the motor tube to send it on a magical mystery tourof the atmospheric kind.

    This sorcerer stands an impressive 33.5 inches tall and has a clear payload section. You can launch just about anything into space. Well, not quite anything, but its sure to hold a small race car, an action figure, or whatever your imagination can dream up. If it fits into the payload section, launch it.

    A Skill Level 3 rocket, this kit comes with a high quality balsa nose cone, laser cut balsa fins and waterslide decals. Designed to be flown on D or E engines, this rocket will scream off the launch pad to heights over 1,600 feet. Getting this illusionist back to earth is magically accomplished on a colorful pre-assembled 18 inch parachute.

    Mercury Redstone Model Rocket Kit

    Estes Mercury Redstone Model Rocket Kit

    Estes's scale model of the Liberty Bell 7 Mercury spacecraft and its Redstone booster features plastic parts, wooden fins, and waterslide decals.

    MIRV Model Rocket Kit

    Estes MIRV Model Rocket Kit

    Enter the world of Multiple Re-Entry Vehicles with the Estes MIRV. The angular design of the model allows three independently powered rockets to separate from the booster which then climb to out-of-sight flights.

    This model includes light-weight foam and specially-molded plastic parts along with laser-cut wood fins. Recovery of the three upper stages is by “High Drag Recovery” which allows them to float gently back to Earth.

    PLEASE NOTE: This rocket requires four engines to launch - one B6-0 (or C6-0) and three A10-3Ts.

    Super Neon XL Model Rocket Kit

    Estes Super Neon XL Model Rocket Kit

    The Estes Super Neon XL is a large, impressive rocket. It's space-age multi-tube fin design provides superior flight stability and a one-of-a-kind look. The Super Neon XL is a gigantic, more-powerful upscaled version of the Estes Super Neon.

    The Super Neon XL features laser cut wood parts, a high-quality wood nose cone, neon waterslide decals, and top quality Estes body tubes. These features combine to guarantee outstanding flight performance. Towering over most rockets at 37 inches, the XL lifts off on powerful Estes D and E engines. It returns smoothly to earth under a vivid 24-inch parachute.

    Tercel Model Rocket Kit

    Estes Tercel Model Rocket Kit

    The Tercel is an amazing boost glider! A great addition to any rocketeers collection, watch it soar over 700 feet high and glide gently back to Earth. This glider is able to soar for over a minute.

    V-2 Semi-Scale Model Rocket Kit

    Estes V-2 Semi-Scale Model Rocket Kit

    Powered by C11, D12 and E9 engines, the Estes V2 kit is a flying scale model of the Aggregat-4 ballistic missile developed by the Germans during World War II. After the war, the US used the V-2 as a research rocket to kick-start its rocket development program.

    Cougar 660 Model Rocket Kit

    FlisKits Cougar 660 Model Rocket Kit

    Designed for streamer duration contests, the Cougar 660 employs a paper reduction shroud (tailcone) to cut drag, a parabolic nose cone, and 1/64" aircraft-grade plywood fins.

    Included are 3 different fin patterns giving you the ultimate in customization for such a model. Choose from parabolic, swept parabolic and asymmetric parabolic.

    Enhancing the competition nature of this kit, the Cougar 660 comes with a large 6" X 60" competition grade streamer with detailed assembly instructions. For sport and test flights a 20" crepe paper streamer is also included.

    Rounding out this champion is the inclusion of a "Pop-Lug" kit with full instructions. The Pop-Lug allows you to launch your Cougar 660 on any conventional launch pad (with a 1/8" launch rod) WITHOUT the drag penalty of carrying a launch lug on the rocket. This provides up to a 15% reduction in drag!. The Pop-Lug stays on the launch pad allowing the Cougar 660 to climb to incredible altitudes.

    Aura Model Rocket Kit

    LOC/Precision Aura Model Rocket Kit

    LOC's Aura features heavy-duty airframe and motor mount tubes, precision-cut plywood fins and centering rings, and a rip-stop nylon streamer. The Aura can be flown on D though H motors. The rocket has a 29mm motor mount. An adapter, not included, is required to use 24mm motors.

    Little Green Man Model Rocket Kit

    Odd'l Rockets Little Green Man Model Rocket Kit

    From the fuzzy antenna on the top of his head to the bottom of his (three) feet, this little guy is out of this world. He looks friendly enough, but what's up with that raygun on his belt? Stand back as the Little Green Man takes flight!

    Pigasus Model Rocket Kit

    Odd'l Rockets Pigasus Model Rocket Kit

    The Pigasus is not your typical "three-fins and a nose cone" rocket.  It's a two wings, four legs, and a snout rocket (and ears and glasses, too).

    Fly this pink piglet on a B6 or C6 engine for a squealing stable flight then watch as the porcine projectile returns to earth under its parachute.

    "It's a terrific pork flyer." - Ham Solo

    "Don't fry your bacon, fly it!" - Piggie Smalls (The Notorious P.I.G.)

    "Sometimes a pig isn't just a pig." - Pigmund Freud

    "I feel a connection to this rocket." - Kevin Bacon

    "Odd'l Rockets has produced a real wiener." - Col. Tom Porker

    "You will believe a pig can fly!" - G. Harry Swine

    If the Pigasus kit is "Sold Out," please don't despair.  We expect another litter to arrive soon!

     

    Big Dog Model Rocket Kit

    Quest Aerospace Big Dog Model Rocket Kit

    The Big Dog stands over 32 inches tall. The kit features a blow-molded plastic nose cone, laser-cut balsa fins, and a rugged 29mm diameter motor mount. Flights with an Aerotech F32-6W will go to almost 3,000 feet. The Big Dogreturns to earth under a large 18" fabric parachute.

    The kit includes big, easy-to-apply self-adhesive decals. It also includes an engine adapter that allows you to use 24mm engines.

    Harpoon AGM Model Rocket Kit

    Quest Aerospace Harpoon AGM Model Rocket Kit

    Quest's Harpoon model rocket kit is accurately detailed to match the US Navy and Air Force SLAM AGM-84 Harpoon anti-ship missile. The Harpoon model rocket can reach an altitude of 800 feet.

    High-Q Model Rocket Kit

    Quest Aerospace High-Q Model Rocket Kit

    Quest's High-Q is a great looking and performing mid-size rocket. Over 30 inches tall, the kit features a blow-molded plastic nose cone, laser-cut balsa fins, and a rugged 29mm diameter motor mount. Flights with an Aerotech F32-6W will go to almost 3,000 feet. The High-Q then floats back to earth under an18" fabric parachute.

    The High-Q includes big, easy-to-apply self-adhesive decals. It also includes an engine mount adapter that allows you to use 24mm diameter engines.

    Lil' Grunt Model Rocket Kit

    Quest Aerospace Lil' Grunt Model Rocket Kit

    A short, fat stubby rocket powered by Estes D motors, the Lil' Grunt is one powerful little guy.

    Magnum Sport Loader Model Rocket Kit

    Quest Aerospace Magnum Sport Loader Model Rocket Kit

    The Quest Aerospace Magnum Sport Loader is powered by a cluster of two rocket motors. Its large payload bay can carry two eggs or any other payload you have in mind. The Magnum Sport Loader comes with two parachutes so the payload section can be recovered separately.

    Quad Runner Advanced Model Rocket Kit

    Quest Aerospace Quad Runner Advanced Model Rocket Kit

    Quest's Quad Runner flies on a cluster of four motors.

    Zenith II Model Rocket Kit

    Quest Aerospace Zenith II Model Rocket Kit

    The Quest Zenith II model rocket is a high performance two-stage payload vehicle. The Zenith II includes a translucent red payload bay to send projects to high altitudes. Flights up to 1500 feet are achievable depending on the payload and model rocket engines used. The Zenith II has a parachute recovery system.

    Retro Rebel Model Rocket Kit

    Rocketarium Retro Rebel Model Rocket Kit

    Rocketarium has utilized a computer-controlled production process to create the intricate pieces that assemble to produce one of the most unique flying model rocket kits you'll ever see. The Rebel Rebel rocket kit includes twenty-two pre-cut plywood pieces. It uses a parachute for recovery and includes a Kevlar and elastic shock cord.

    Super Chief II Multi-Stage Model Rocket Kit

    Rocketarium Super Chief II Multi-Stage Model Rocket Kit

    This Super Chief II sounding rocket combined the Talos booster and Castor sustainer to reach altitudes up to 190 miles. The rocket gathered data on daytime air glow from high altitudes.

    Rocketarium's sport-scale model of the Super Chief II also has two stages. It stages from a D motor to a B or C motor. The kit includes wrap-around bands, hatches, and decals to give it the right level of detail.

    Baby Orion Model Rocket Kit

    Semroc Baby Orion Model Rocket Kit

    Semroc's Baby Orion is a scaled-down version of the classic Centuri Orion kit from the 1970s.

    MX Orbital Transport MicroMaxx Model Rocket Kit

    Semroc MX Orbital Transport MicroMaxx Model Rocket Kit

    Semroc has produced a MicroMaxx-powered, down-scale flying model rocket kit based on the classic Estes Orbital Transport design. Just 8.6" in length when built, this rocket features a piggy-back orbiter which glides back to earth while the booster deploys a streamer for recovery.

    Orbital Transport Model Rocket Kit

    Semroc Orbital Transport Model Rocket Kit

    The Estes Orbital Transport first appeared in the 1968 Estes catalog. Inspired by a painting on the cover of the November, 1959, issue of Popular Mechanics magazine, the Estes Orbital Transport kit featured a futuristic design with a gliding orbiter. The rocket's booster is 23 inches long and .976 inches in diameter. The orbiter is 8.6 inches long and .736 inches in diameter.

    Semroc's reproduction of the Classic Estes kit features balsa nose cones, laser-cut balsa fins, elastic shock cord, and improved shock cord mounting.


    Popular Mechanics, November, 1959

    Orion Model Rocket Kit

    Semroc Orion Model Rocket Kit

    Featuring a balsa nose cone, laser-cut fins, and an internal baffle system, Semroc's Orion flying model rocket kit is a modern update of the classic Centuri kit of the 1970s.

    Satellite Killer Model Rocket Kit

    Semroc Satellite Killer Model Rocket Kit

    The Satellite Killer model rocket kit was released in 1980 by Centuri Engineering Company along with the Red-Eye as its enemy satellite. Inspired by the cold war "Star Wars" proposal, these models were a part of Centuri's "War in Space" series. Since these were done in the final days of Centuri as a separate company from Estes Industries, there were no later entries.

    The Semroc Retro-Repro Satellite Killer kit is updated with laser-cut fiber fins. The original foil decals are changed to waterslide for ease of use and durability. A Kevlar cord is added for a more reliable shock mount. Most of the rest of the model is faithful to the original design.

    UFO Invader Model Rocket Kit

    Semroc UFO Invader Model Rocket Kit

    The year is 1980 and at last the existence of flying saucers is a proven fact. First sighted in the mysterious Bermuda Triangle, the U.F.O. Invader has been observed by countless eyewitnesses. The Invader is a submarine as well as a deep space ship...able to travel on the ocean surface, buoyed by its wing pods. It submerges to a hidden undersea base where the aliens perhaps study Earth and its people. Little is known about the aliens, but we know this: we are not alone in the universe!

    Semroc's UFO Invader kit is based on the 1970s Centuri "Super Kit." The kit features a balsa nose cone, laser-cut fiber fins, and waterslide decals. Includes two parachutes for recovery.



Copyright © 2019 JonRocket.com LLC