Your Shopping Cart is empty

Recommended Motors = A8-3

    Coporal (18mm) Model Rocket Kit

    Aerospace Speciality Products Coporal (18mm) Model Rocket Kit

    The Corporal was the first guided missile put into use by the U. S. Army. Originally designed as a test vehicle to study the problems associated with long range rockets, the Corporal was later turned into a tactical battlefield missile capable of carrying either a conventional or nuclear warhead. The first test vehicle was flown in 1947. Full production vehicles made their appearance in the summer of 1952. The basic design saw some modifications until the Corporal was retired in 1964.

    ASP's model features a balsa nose cone and balsa conduits, basswood fins, and decals.

    Kappa-7-1 (18mm) Model Rocket Kit

    Aerospace Speciality Products Kappa-7-1 (18mm) Model Rocket Kit

    The Kappa-7 was designed as a booster for Japan's later Kappa-8 and Kappa-9 rockets as well as being used as a single-stage sounding rocket. It was determined, however, that the vehicle was unsuitable as a single-stage rocket. The lone Kappa-7 flight was made on November 18, 1959 to confirm the motor's suitability as a booster. 

    ASP's model of one of Japan's early sounding rockets makes a great beginner's kit. Capable of flying on a wide range of engines, this great looking and great flying model can be flown on practically any size field.

    Kappa-9M (18mm) Model Rocket Kit

    Aerospace Speciality Products Kappa-9M (18mm) Model Rocket Kit

    The Kappa 9M is a two-stage Japanese sounding rocket. The first Kappa 9M (K-9M-1) was flown on November 12, 1962.

    ASP's single-stage scale model features basswood fins, balsa nose cone, balsa transition, and decals. This is a neat looking model that's also fairly easy to build.

    Neo Standard Model Rocket Kit

    Aerospace Speciality Products Neo Standard Model Rocket Kit

    ASP's Neo Standard is a great beginner's kit. Easy to build and fly, the Neo Standard is ideal for use in school and other group settings. Designed with the beginner in mind, the Neo Standard is also a fun sport flier for modelers of any experience level.

    Features laser-cut balsa fins, balsa nose cone, quick-change engine hook, and parachute recovery. The Neo Standard flies on standard 18mm engines.

    Not So Stubby (18mm) Model Rocket Kit

    Aerospace Speciality Products Not So Stubby (18mm) Model Rocket Kit

    The bigger brother of ASP's Stubby, the "Not So Stubby" is a fun, easy to build model which is ideal for flying on any size field. Like its little brother, this kit is designed with the beginner in mind, but also is a great sport flier for the more experienced modeler.

    Features laser-cut balsa fins, a balsa nose cone, quick change engine hook, and parachute recovery, the Not So Stubbyflies on easy to find 18mm A, B or C engines.

    RAM B (18mm) Model Rocket Kit

    Aerospace Speciality Products RAM B (18mm) Model Rocket Kit

    The RAM ("Radio Attenuation Measurement") B was a three-stage rocket designed to study communications during reentry after a lunar voyage.

    ASP's single-stage "Fun Scale" model of the RAM B captures the general apperance of the real vehicle, yet is easy enough for the novice modeler. Includes trim tape and self-adhesive trim material to simplify painting and detailing.

    Stretch Stubby (18mm) Model Rocket Kit

    Aerospace Speciality Products Stretch Stubby (18mm) Model Rocket Kit

    The Stretch Stubby is ASP's big brother of their Stubby and the Not So Stubby kits. This fun, easy-to-build model features a big payload section.

    Designed wth the beginner in mind, this rocket makes a great first or second rocket kit.

    The Stretch Stubby features laser-cut balsa fins, a balsa nose cone, a quick change engine hook, a payload section (big enough to hold many commercial electronics), and a bright parachute for recovery.

    That Tube Rocket (18mm) Model Rocket Kit

    Aerospace Speciality Products That Tube Rocket (18mm) Model Rocket Kit

    ASP's That Tube Rocket flies without the use of standard fins. Very easy to build, That Tube Rocket includes a quick-change engine hook that makes it easy to fly over and over. Features ASP's usual top-quality components and outstanding instructions.

    Theta 18 Model Rocket Kit

    Aerospace Speciality Products Theta 18 Model Rocket Kit

    ASP's Theta 18 is an easy-to-build kit for beginners and a great sport flier for modelers of any experience level. With laser-cut balsa fins, a balsa nose cone, and streamer recovery, the Theta 18 flies on standard 18mm engines.

    Astron Drifter Model Rocket Kit

    BMS Astron Drifter Model Rocket Kit

    This is a clone kit (parts only) for the Estes Astron Drifter (#K-14). The Astron Drifter first appeared in the 1964 Estes catalog. Estes continued to produce the Drifter through 1979. The rocket was designed to compete in parachute duration events.

    BMS has improved the kit with laser-cut fins. A parachute is not included. 

    Buck Rogers Earth Forces Starfighter Model Rocket Kit (OOP)

    Centuri Buck Rogers Earth Forces Starfighter Model Rocket Kit (OOP)

    Centuri produced the Buck Rogers Starfighter kit around 1979 to 1981.


    This is an out-of-production kit in the orginal packaging. The kit is in reasonable shape considering its age. The plastic bag and header card may be faded, wrinkled, or slightly torn.

    A.T.W. Model Rocket Kit

    Custom Rocket A.T.W. Model Rocket Kit

    The ATW is a scale-like model of the Army's next-generation ultra powerful anti-tank weapon. Features include an injection-molded plastic nose cone, die-cut balsa fins, streamer recovery, and pressure-sensitive decals.

    Atomic Model Rocket Kit

    Custom Rocket Atomic Model Rocket Kit

    The Atomic is a six-finned rocket with fifties retro styling. It features an injection-molded plastic nose cone, die-cut balsa fins, parachute recovery, pressure-sensitive decals, and a quick-release engine mount for fast engine changes. Flights of over 1000 feet are possible with a C6-7 motor.

    Aztec Model Rocket Kit

    Custom Rocket Aztec Model Rocket Kit

    The Aztec is a fun two-stage rocket which flies almost half a mile into the sky. Features an injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, and pressure sensitive decals.

    Fiesta Model Rocket Kit

    Custom Rocket Fiesta Model Rocket Kit

    The Fiesta lives up to its name. It is a fun sport rocket with wild decals. Easy to build and fly, it makes a great beginner kit. Features an injection-molded plastic nose cone, die-cut balsa fins, streamer recovery, pressure sensitive decals, and aquick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.

    Freedom Model Rocket Kit

    Custom Rocket Freedom Model Rocket Kit

    Custom Rocket's Freedom is a patriotic kit which is easy to build and fly. It makes a great beginner kit. Features injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, self-adhesive decals, and a quick-release engine mount. Flights of over 1,000 feet are possible when flown with a C6-7 motor.

    Freestyle Model Rocket Kit

    Custom Rocket Freestyle Model Rocket Kit

    Colorful graphics set the Custom Rocket Freestyle kit apart from the rest. The kit includes an injection-molded nose cone, quick-release engine mount, laser-cut balsa fins, a 12" parachute and self-adhesive decals. Flights to 750 feet.

    Galaxy Patrol Model Rocket Kit

    Custom Rocket Galaxy Patrol Model Rocket Kit

    Keeping our universe safe since 2080. Features injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, quick-release engine mount, and detailed pressure-sensitive decals.

    Galaxy Rescue Model Rocket Kit

    Custom Rocket Galaxy Rescue Model Rocket Kit

    First on the scene of any emergency. Features injection-molded plastic nose cone, laser-cut balsa fins, and streamer recovery. Impressive self-adhesive decals and quick-release engine mount. Super high flier can reach altitudes over 1,000 feet.

    Galaxy Taxi Model Rocket Kit

    Custom Rocket Galaxy Taxi Model Rocket Kit

    Space taxi! Small details make this an excellent display model for your collection. Features injection-molded plastic nose cone, quick-release engine mount, laser-cut balsa fins, streamer recovery, and large pressure-sensitive decal.

    Game Over Model Rocket Kit

    Custom Rocket Game Over Model Rocket Kit

    Flashback to the early 80s with Custom's Game Over flying model rocket kit. The 8-bit graphics on the decals remind us of the decade of video games and MC Hammer pants. This kit features an injection nose cone, laser-cut fins, streamer recovery, pressure-sensitive decals, and a quick-release engine mount. Flights over 1000 feet are possible.

    M320 Model Rocket Kit

    Custom Rocket M320 Model Rocket Kit

    The M320 is a scale-like missile. The kit features an injection-molded plastic nose cone, laser-cut balsa fins, streamer recovery, pressure-sensitive decals, and quick-release engine mount.

    Raven Model Rocket Kit

    Custom Rocket Raven Model Rocket Kit

    The Raven is a scale-like, surface-to-air missile. The kit features an injection-molded plastic nose cone, die-cut balsa fins, 12" parachute, precision water-slide decals, and a quick-release engine mount. Flights over 1,000 feet are possible with a C6-7 motor.

    Razor Model Rocket Kit

    Custom Rocket Razor Model Rocket Kit

    This unique model uses tubes as fins. With pre-colored parts there is no painting required. Features injection-molded plastic nose cone, and 12" parachute recovery. Includes self-adhesive decals and quick-release engine mount for fast engine change. Flies over 1,000 feet with a C6-7 motor.

    Redliner Model Rocket Kit

    Custom Rocket Redliner Model Rocket Kit

    The Redliner is a sleek, long design. Easy to build and fly, it makes a great beginner kit. The kit featues an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute, precision printed water-slide decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.

    Serin Model Rocket Kit

    Custom Rocket Serin Model Rocket Kit

    The Serin is a scale-like surface-to-air missile. It looks realistic on the launch pad and in the air. Easy to build and fly, it makes a great beginner kit. The kit features a blow molded plastic nose cone, die-cut balsa fins, 12" parachute, precision water-slide decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.

    Skybird Model Rocket Kit

    Custom Rocket Skybird Model Rocket Kit

    The Skybird includes a transparent red payload tube to carry an insect or other small experiment. Easy to build and fly, the kit is great for a beginner. The Skybird features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, pressure sensitive decals, and a quick-release engine mount Flights of over 1000 feet are possible with a C6-7 motor

    Solar Explorer Model Rocket Kit

    Custom Rocket Solar Explorer Model Rocket Kit

    The Solar Explorer is a deep space probe searching for habitable planets. The kit features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, unique self-adhesive decals, and a quick-release engine mount. Flights to 700 feet.

    Sport Model Rocket Kit

    Custom Rocket Sport Model Rocket Kit

    The super-long Sport from Custom Rocketry provides slow, realistic lift-offs. Easy to build and fly, this almost 2 1/2-foot tall rocket makes a great beginner kit. Features include an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, a pressure sensitive decal, and a quick-release engine mount. Flights of over 750 feet are possible on a C6-5 motor.

    Venture Model Rocket Kit

    Custom Rocket Venture Model Rocket Kit

    The Venture is a great kit for your first or second rocket. The kit features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute recovery, a pressure sensitive decal, and a quick-release engine mount.

    Zero Gravity Model Rocket Kit

    Custom Rocket Zero Gravity Model Rocket Kit

    The Zero Gravity is a low-priced, easy to assemble kit. It features an injection-molded plastic nose cone, laser-cut balsa fins, 12" parachute, pressure-sensitive decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a C6-7 motor.


    The Zero Gravity kit may be bulk packaged in a plain, clear plastic bag rather than retail packaged.

    "Young Astronauts Club" Cadet Model Rocket Kit (OOP, 1987)

    Estes "Young Astronauts Club" Cadet Model Rocket Kit (OOP, 1987)

    Estes released the Cadet kit in 1987 to support the "Young Astronauts Club." This kit is no longer in production. It is in good condition and is still-sealed in the original packaging.

    Based on the Blazer kit, this kit features die-cut fiber fins and streamer recovery.

    Established in 1984 by the White House, the Young Astronauts Council uses space to promote interest in science, math, and technology among young people. The Council supports local Young Astronauts Chapters around the world as well as the "Young Astronauts Club" for individual memberships. The Council is a non-profit organizationand receives no government funding. It is funded by membership fees paid by its official chapters. Chapters and Club (individual) members receive official Young Astronaut membership cards and certificates containing a seal that was flown in space aboard the space shuttle.

    Alpha III Launch Set

    Estes Alpha III Launch Set

    The Estes Alpha III Launch set includes the classic, easy-to-build Alpha III model rocket kit, a launch pad, and a controller.

    Alpha III Model Rocket Kit Bulk Pack (12)

    Estes Alpha III Model Rocket Kit Bulk Pack (12)

    This educator bulk pack contains 12 Alpha III kits. The Alpha III is one of the most reliable, easiest to build rockets. It features a dynamic look - a gloss black body tube with a fluorescent orange plastic fin unit and nose cone. The Alpha III requires no painting.

    Alpha Model Rocket Kit

    Estes Alpha Model Rocket Kit

    The Estes Alpha has introduced many millions to model rocketry since its introduction more than 35 years ago. Easy-to-build, the Alpha looks great and flies great.

    The Alpha is a classic Skill Level 1 kit. It includes a one-piece body tube, laser-cut wood fins, and an aerodynamic nose cone.

    Building the Alpha takes about an afternoon. When powered with a C engine, the rocket can reach altitudes of 1,000 feet. Recovery is accomplished with a colorful 12-inch preassembled parachute.

    Baby Bertha Model Rocket Kit

    Estes Baby Bertha Model Rocket Kit

    The Baby Bertha is a pint-sized version of the classic Big Bertha. At just under 13 inches, the Baby Bertha is about half the size of it's larger cousin. The Baby Bertha kit features laser-cut fins, a plastic nose cone, self-stick decals, and a colorful 12-inch pre-assembled parachute.

    Bull Pup 12D Model Rocket Kit

    Estes Bull Pup 12D Model Rocket Kit

    The Estes Bull Pup 12D is a sport-scale version of the Air Force's AGM-12D Bull Pup missile. The Bull Pup makes a great first scale model.

    Chrome Domes Gold Model Rocket Kit

    Estes Chrome Domes Gold Model Rocket Kit

    With gold chrome fins and nose cone, the Estes Chrome Domes Gold model rocket kit is sure to put a sparkle in your eye. A prismatic body tube completes the jewel-like appearance of this easy-to-build rocket kit.

    Chuter 2 Model Rocket Kit

    Estes Chuter 2 Model Rocket Kit

    The Estes Chuter 2 features dual parachutes which bring this classic rocket back to Earth in style after blasting off to heights of up to 900 feet. The unique fin design and colorful body of the Chuter-Two make it a great rocket for anyone.

    Estes has gone back to the archives and pulled up old drawings and spec sheets to bring back this vintage design. The kit has been reproduced and updated while retaining the classic lines of the original. The Chuter-Two kit contains high-quality body tubes, a balsa nose cone, and laser-cut balsa fins.

    Comet Chaser Model Rocket Kit

    Estes Comet Chaser Model Rocket Kit

    The Comet Chaser soars over 1,100 feet and is powered by standard engines. Simple to glue and paint, the Comet Chaser deserves to be in your rocket collection or if you are just starting out, it's a great starter rocket. Just a few hours of your time and you'll be ready to go!

    Crossfire ISX Model Rocket Kit

    Estes Crossfire ISX Model Rocket Kit

    Prioviously only available in a launch set, the Estes Crossfire ISX is, perhaps, the coolest looking beginner's kit in Estes's catalog. With laser-cut wood fins and bright, self-stick decals, the Crossfire ISX flies on standard-size motors and is recovered by parachute.

    Dazzler Model Rocket Kit

    Estes Dazzler Model Rocket Kit

    Slip the fins into the fin can, tie the shock cord to the nose cone and that fast, you are ready for the flying field! The Dazzler, powered by standard engines, can reach heights over 1,100 feet!

    Equinox Model Rocket Kit

    Estes Equinox Model Rocket Kit

    Simple to build, the Equinox needs about an evening of your time, white or yellow glue, and paint. Standing just 15 inches (38.1 cm) tall, this jewel can soar up to 1,575 (480 m) feet!

    This one is simple to build yet impressive in looks! The Equinox is sure to get noticed at the flying field.

    Flutter-By Model Rocket Kit

    Estes Flutter-By Model Rocket Kit

    Estes has re-created the Centuri classic of the early 1970s. The Flutter-By does not have a parachute or streamer. Instead, at apogee, the rocket splits into two parts.Each part tumbles to earth.

    Hi-Flier Model Rocket Kit

    Estes Hi-Flier Model Rocket Kit

    The Estes Hi-Flier is one of the most extreme, super performance model rockets you can own. The Hi-Flier can easily be built in one afternoon. The Estes Hi-Flier isis capable to flights over 1,600 feet and recovers with a fluorescent orange streamer.

    Longneck Express Model Rocket Kit

    Estes Longneck Express Model Rocket Kit

    Fast to the flying field, the Longneck Express is a fully assembled, great looking, really high-flying model rocket. Recovery is quick with 12-inch parachute so you can launch again and again.

    Nemesis Model Rocket Kit

    Estes Nemesis Model Rocket Kit

    Estes introduced the Nemesis in their 2001 catalog. It features a futuristic spaceship design with a cockpit molded into the nosecone.

    Produced from about 2001 to 2004, this kit is still in the original packaging.

    Nike Apache Model Rocket Kit

    Estes Nike Apache Model Rocket Kit

    The Estes Nike Apache is a single-stage scale kit.

    Ricochet Model Rocket Kit

    Estes Ricochet Model Rocket Kit

    This Skill Level 1 rocket is part of Estes's "Basic Builder Series."It is simple to build and paint, but features distinctive Air-to-Air missile styling. The Ricochet flies up to 1125 feet on a C motor.

    Super Neon Model Rocket Kit

    Estes Super Neon Model Rocket Kit

    The Estes Super Neon features special "tubular flight stabilizers" which will make this rocket a favorite to build and fly. Watch the Super Neon model rocket soar to heights of almost 1000 feet using standard Estes motors.

    Viking Model Rocket Bulk Pack (12 Kits)

    Estes Viking Model Rocket Bulk Pack (12 Kits)

    The Estes Viking can be easily assembled with 48 possible different fin configurations. The kit\'s five special, die-cut card stock fins allow you to create a rocket that\'s truly unique. Take your pick on how you want your rocket to look; fins up, fins down or fins whatever way. You call it, it\'s your day to be the rocket designer.

    Customize your own rocket...no matter how you place the fins, it still offers the ultimate in high performance model rocket flight. This Skill Level 1 rocket kit includes a single-piece body tube, molded nose cone, and self-stick decals.

    The Viking is just over 12 inches tall. When flown on standard engines, the Viking is able to reach amazing launch heights over 1600 feet and land safely with its bright orange streamer.

    The versatile Viking can be built in an afternoon and is a great rocket for beginners, class projects, clubs and rocket demonstrations.

    Wizard Model Rocket Kit

    Estes Wizard Model Rocket Kit

    The Estes Wizard is an easy-to-assemble, Skill Level 1 kit with a one-piece body tube, laser-cut wood fins, and a bullet-shaped plastic nose cone. The self-stick decals are sure to make this mystic rocket the envy of everyone at your local launch field. The Wizard is a great rocket for beginners, schools, clubs and rocket demonstrations.

    Yankee Model Rocket Kit

    Estes Yankee Model Rocket Kit

    The Estes Yankee is a rocket with an All-America decor and performance to match. On a C6-7 motor, it screams to 1400 feet in altitude.The Estes Yankee includes self-adhesive decals for that red, white and blue look.

    Avalear Model Rocket Kit

    FlisKits Avalear Model Rocket Kit

    Rated by FlisKits as a "Skill Level 1.5" build, the Avalear is a perfect second or third rocket kit to build.

    Jim Flis designed the kit to to introduce skills needed to construct more difficult kits such as cutting fins. The Avalear comes with a sheet of balsa fin stock and patterns for the two different shape fins (six fins in all). The fin shapes are simple in design making cutting with a straight edge quite easy. Additionally, the kit includes a BT-19 dummy motor tube that is glued to a Fin Alignment Template to make aligning the fins a breeze. The end result is a fairly easy build, a sharp looking rocket and new skills that you can apply to your next model rocket kit.

    Corona Model Rocket Kit

    FlisKits Corona Model Rocket Kit

    Long and sleek, the Corona is also an excellent performer.  With its strong, laser-cut plywood fins, the Corona is also sturdy. It will be a part of your rocket fleet for a long time.

    Long Overdue Model Rocket Kit

    FlisKits Long Overdue Model Rocket Kit

    The Long Overdue features unique nested tube fins.

    Thing-a-Ma-Jig Model Rocket Kit

    FlisKits Thing-a-Ma-Jig Model Rocket Kit

    The FlisKits Thing-a-Ma-Jig kit is designed for first-time rocket builders. The kit's laser-cut fins hold themselves together while the glue dries - ensuring perfect alignment.

    Triskelion Model Rocket Kit

    FlisKits Triskelion Model Rocket Kit

    FlisKits's Triskelion is a terrific choice for your second rocket (or your 100th). The Triskelion features laser-cut fins which give it a sharp look.

    Klingon Bird of Prey Model Rocket Kit

    MPC Klingon Bird of Prey Model Rocket Kit

    This Star Trek themed rocket is easy to build. It features a clear green payload compartment.

    Looney Tunes Duck Dodgers Cadet Cruiser Model Rocket Kit

    MPC Looney Tunes Duck Dodgers Cadet Cruiser Model Rocket Kit

    The Duck Dodgers Cadet Cruiser is an easy-to-build rocket from MPC featuring Porky Pig of Looney Tunes fame. The kit can be built and ready for launch in less than one hour. It includes a unique parachute design and is compatible with Estes and Quest engines. A self-stick decal sheet and illustrated instructions complete the kit.

    USS Enterprise Model Rocket Kit

    MPC USS Enterprise Model Rocket Kit

    MPC's USS Enterprise rocket is easy to build with two pre-decorated body tubes.  It is 28.71" (72.9cm) long with a diameter of 1.58" (40mm) and uses standard engines from Estes and Quest. The kit includes self-stick decals and a special parachute.

    USS Reliant Model Rocket Kit

    MPC USS Reliant Model Rocket Kit

    MPC's USS Reliant rocket is easy to build with a pre-decorated body tube.  The Star Trek themed rocket uses standard engines from Estes and Quest and includes self-stick decals and a special parachute.

    Break Away Model Rocket Kit

    Odd'l Rockets Break Away Model Rocket Kit

    Odd'l Rockets' Break Away features "break-apart" recovery. At apogee, the rocket breaks into several sections which wiggle their way back to earth. A Kevlar tether holds the pieces together making recovery safe and easy. Just slide the segments back together and you are ready for another flight.

    Odd'l Rockets has improved upon the original Break Away by using longer coupler connections and engineering better, easier-to-construct segment ties.
    F-16 Model Rocket Kit

    Odd'l Rockets F-16 Model Rocket Kit

    Based on the classic Centuri F-16 Fighter kit of the late 1970s, the Odd'l Rockets F-16 features a heavy BT-50 body tube, clear canopy, laser-cut fins, and simulated missiles and wing-tip fuel tanks.

    April Dancer Model Rocket Kit

    Semroc April Dancer Model Rocket Kit

    Fans of the 1960's TV show "The Man From U.N.C.L.E" will recall the gull-winged car which included a rocket launcher. The special effects crew used Centuri Mini-Max F rocket motors. Semroc's scaled down version of the Man From U.N.C.L.E. rocket flies on smaller 18mm A, B, and C motors.

    Astro 1 Model Rocket Kit

    Semroc Astro 1 Model Rocket Kit

    Semroc's Astro 1 kit is a clone of the Centuri kit. As described in the Centuri 1969 catalog, the Astro 1 is "an excellent starting kit for the beginning rocketeer. Its high performance design assures you excellent, high altitude flights every time. Upon ignition, ASTRO-1 zooms hundreds of feet into the sky."

    The original Astro-1 was one of the first model rocket kits to incorporate a "Quick-Change" engine mount that became a standard in model rocketry. Designed to be an excellent beginner’s kit, the Astro-1 became the first rocket for thousands of new model rocketeers. The “rake-back” fins were so different that many were built incorrectly with the fins glued on to resemble the Estes Alpha.

    Astron Model Rocket Kit

    Semroc Astron Model Rocket Kit

    The Astron is an excellent beginner's kit with laser-cut fins and a balsa nose cone.

    Starship Vega Model Rocket Kit

    Semroc Starship Vega Model Rocket Kit

    Semroc brings back another classic from the past with the Starship Vega flying model rocket kit. Sporting a futuristic design, the Starship Vega made its first appearance in the 1973 Estes catalog.

    Trident Model Rocket Kit

    Semroc Trident Model Rocket Kit

    Estes released its Trident kit in 1967. Semroc's re-issue of this futuristic classic features laser-cut fins and waterslide decals.

    Yung'un's Nuke Model Rocket Kit

    Semroc Yung'un's Nuke Model Rocket Kit

    The Yung'un's Nuke is the fourth of the Semroc "Groonies" series of Goonie-style model rocket kits. What can a dictator of a small third world country give to his yung'un that tells the civilized world that he means business? Just any old baby bottle is not good enough to nurse his baby boy. No, it has to serve as a message to the world that this yung'un is different. He can use this gift to provide nourishment and recycle the empties to let everyone know that he is important and can do some-thing with his life that most others cannot do. He can change the world, or at least blow up a small piece of it. This model does not include baby's milk or nuclear material, but will provide some of the fun of the original.



Copyright © 2018 JonRocket.com LLC