Your Shopping Cart is empty

Recommended Motors = B4-2

    Coporal (24mm) Model Rocket Kit

    Aerospace Speciality Products Coporal (24mm) Model Rocket Kit

    The Corporal was the first guided missile put into use by the U. S. Army. Originally designed as a test vehicle to study the problems associated with long range rockets, the Corporal was later turned into a tactical battlefield missile capable of carrying either a conventional or nuclear warhead. The first test vehicle was flown in 1947. Full production vehicles made their appearance in the summer of 1952. The basic design saw some modifications until the Corporal was retired in 1964.

    ASP's model features a balsa nose cone and balsa conduits, basswood fins, and decals. Designed to fly on 24mm C, D, and E motors, this single-stage rocket can also fly on select 18mm using an adapter (not included).

     With the the included decals, no masking is required when painting this impressive model.

    RP-3 (24mm) Model Rocket Kit

    Aerospace Speciality Products RP-3 (24mm) Model Rocket Kit

    The RP-3 was an unguided experimental Polish rocket. Earlier versions of the RP series were used for diverse purposes such as wind studies and carrying "Rocket Mail." The RP-3 was first built in 1963 and stood over seven feet tall.

    ASP's scale model is 22" tall. This unique-looking kit is a sturdy model for D and E powered flights, yet it is still light enough to fly on selected 18mm engines with a motor adapter (not included). The kit includes laser-cut ply fins, balsa nose cone, and decal. Many who own this kit count it among their favorites.

    S.L.V. Model Rocket Kit

    Custom Rocket S.L.V. Model Rocket Kit

    The SLV ("Satellite Launch Vehicle) provides slow, impressivelift-offs that look so real. The kit features an injection-molded plastic nose cone, six die-cut balsa fins, a 12" parachute, and self-adhesive decals. Flights of over 750 feet.

    Alien Green Crayon Model Rocket Kit

    Estes Alien Green Crayon Model Rocket Kit

    The Green Alien model rocket kit is almost ready to fly. This crayon-themed rocket stands almost 20" tall and features a twist-on fin section when also acts as a motor retainer.

    Atomic Aqua Model Rocket Kit

    Estes Atomic Aqua Model Rocket Kit

    One of Estes's series of "ready-to-fly" crayon rockets, the Atomic Aqua flies to more than 500 feet on a C motor.

    Big Bertha Model Rocket Kit

    Estes Big Bertha Model Rocket Kit

    The Big Bertha is a classic Estes kit. Designed by Vern Estes himself, this is one of the largest Skill Level 1 rockets. it is a great beginenr's rocket. The Big Bertha is terrific for demonstractions as its large size and steady flights on smaller motors provide slow, realistic lift-offs.

    Blast Off Blue Model Rocket Kit

    Estes Blast Off Blue Model Rocket Kit

    Blast off with the Estes Blast Off Blue flying model rocket. This kit comes pretty much ready to fly and soars to more than 500 feet on a C motor.

    Citation Series Patriot Model Rocket Kit

    Estes Citation Series Patriot Model Rocket Kit

    Coming soon from Estes ... a reissue of the Estes Citation Series Patriot model rocket kit. The price and details of the kit are to be determined, but you can use the form on this page to sign up to receive an email when we get the kits.

    Color the Sky Crayon Rockets Bulk Pack (12)

    Estes Color the Sky Crayon Rockets Bulk Pack (12)

    The Estes Color The Sky collection includes twelve crayon-themed rocket kits - each a different color.

    Each kit is easy-to-assemble with plastic fins and nose cone, self-stick decals, and a plastic parachute.

    This is a bulk package of twelve (12) kits.

    Cosmic Cobra Model Rocket Kit

    Estes Cosmic Cobra Model Rocket Kit

    You'll be amazed when the rocket returns to earth with a parachute while the nose cone helicopters down.

    The Cosmic Cobra streaks to altitudes over 500 feet high. Two recovery devices are used to tame this reptile. The main rocket, with upswept fins, returns to earth on a colorful 12 inch parachute while the sleek nose cone helicopters down on bright colored, retractable rotor blades. Assembly of the Cobra takes about one hour or less, making it a great choice for any beginner! You'll draw a crowd at the flying field when you blast this unique rocket into space!

    Dark Energy Model Rocket Kit

    Estes Dark Energy Model Rocket Kit

    One of a kind, the Dark Energy is unlike any rocket before. It features an awesome five-fin design and the waterslide decals and paint give it a sweet futuristic look.

    Firestorm Model Rocket Kit

    Estes Firestorm Model Rocket Kit

    The Estes Firestorm is an "Almost Ready-to-Fly" (ARTF) model rocket featuring uniquely colored plastic fins and nose cone. Just slip the fins into the fin can and the rocket is ready to prep for flight.

    Add the BT-60 Booster accessory (sold separately) to fly the Firestorm as a two-stage rocket.

    Helicat Launch Set

    Estes Helicat Launch Set

    In just a few minutes you will have this rocket ready for the launch pad. The Estes HeliCAT features a unique helicopter nose cone recovery that is a blast to watch land.

    You will need glue and plastic cement, but assembly of the HeliCAT is easy and no painting is necessary. Powered by standard Estes engines, this quickly built rocket reaches heights of over 500 feet.

    This is a launch set which includes an Electron Beam Launch Controller and a Porta-Pad II Launch Pad. Batteries, rocket motors, and other launch supplies are not included.

    Mix-n-Match 50 Model Rocket Kit

    Estes Mix-n-Match 50 Model Rocket Kit

    The Mix-n-Match 50 set includes parts to build three colorful rockets. All parts are pre-colored, so no painting is required. Two sheets of self-stick decals are included.

    The Mix-n-Match 50 includes BT-50 (0.976 inch diameter) parts:

    • Three nose cones and nose cone inserts
    • Six pre-colored BT-50 (.98 in diameter) body tubes
    • Three body tube connecters
    • Three fin can units
    • Twelve fins in three different styles
    • Three launch lugs and clear reinforcements
    • Three shock cords
    • Three pre-assembled parachutes
    • Two self-stick decal sheets
    Red Rider Model Rocket Kit

    Estes Red Rider Model Rocket Kit

    Red Rider is another of Este's new almost-ready-to-fly rockets. Assembly consists of little more than sliding the fins into the fin can. The Red Rider is a single-stage rocket, but you can add the BT-55 Booster accessory (sold separately) to convert it to a two-stage rocket.

    Rocket Red Crayon Model Rocket Kit

    Estes Rocket Red Crayon Model Rocket Kit

    Rocket Red is a RTF crayon-themed rocket. It stands almost 20" tall and features a twist-on fin section.

    Satellite Silver Model Rocket Kit

    Estes Satellite Silver Model Rocket Kit

    Estes's Satellite Silver rocket is styled like a flying crayon. Just insert an engine, twist on the fin unit, attach the shock cord to the nose cone, and you are ready for launch.

    A couple of minutes of your time and you are on the flying field ready to blast off. Standing almost 20 inches tall, this rocket goes well over 500 feet.

    Savage Model Rocket Kit

    Estes Savage Model Rocket Kit

    The Estes Savage is an easy-to-build two-stage rocket. It provides an excellent introduction to multi-stage rocketry.

    Shuttle Xpress Model Rocket Kit

    Estes Shuttle Xpress Model Rocket Kit

    The Estes Shuttle Xpress carries two gliding fighter shuttles to the skies for battle. At apogee, it releases the two fighter shuttles that glide back to earth. Using a standard engine, this rocket can soar to over 575 feet.

    The booster rocket features a jet fighter look with plenty of scale detail and aerodynamic stability. The two shuttle fighters attach to the side of the booster and represent state of the art in stealth glider technology.

    After launching on a standard engine, this powerful rocket can soar to over 575 feet where the fighters are deployed and can cruise for up to 200 feet. After the fighters separate, the booster floats gently down on a bright 12-inch preassembled parachute, ready for another exciting search and destroy mission!

    The Shuttle Xpress is fromthe E2X (Easy to Assemble) series, which requires no painting and is easy to assemble in about an hour.

    Sky Twister Model Rocket Kit

    Estes Sky Twister Model Rocket Kit

    The easy-to-assemble Sky Twister features a nose cone with helicopter recovery. The nose cone deploys rotor blades and spins back to earth while the rest of the rocket returns under a parachute.

    Starbase Starcruiser Model Rocket Kit (OOP)

    Estes Starbase Starcruiser Model Rocket Kit (OOP)

    The Starbase Starcruiser was produced by Estes in 1995 specifically for the US Department of Defense's STARBASE youth program.

    STARBASE is an educational program, sponsored by the Office of the Assistant Secretary of Defense for Reserve Affairs. STARBASE students participate in challenging "hands-on, mind-on" activities in Science, Technology, Engineering, and Math.

    This kit is still in the original, plain plastic bag, packaging. It features a plastic fin set and a large, self-stick decal sheet.

    Starship Nova Model Rocket Kit

    Estes Starship Nova Model Rocket Kit

    Another return of a classic. The Estes Starship Nova is back!

    Long Overdue Model Rocket Kit

    FlisKits Long Overdue Model Rocket Kit

    The Long Overdue features unique nested tube fins.

    Proxima Centauri Model Rocket Kit

    FlisKits Proxima Centauri Model Rocket Kit

    FisKits' Proxima Centauri kit models the first ever manned spaceship to explore beyond our solar system. Her mission is to travel to our nearest neighbor, Proxima Centauri, and to see if there are any habitable planets there.

    The Proxima Centauri kit features:

    • Large balsa nose cone
    • Balsa tube adapter (transition)
    • plastic rod details
    • Large fins
    • Large sheet of colorful water slide decals

    Standing nearly three-feet tall, the Proxima Centauri is a must for any enthusiast of future possibilities and the idea that we not only WILL go out there, we MUST go out there! Create your own universe, adventures and explorations as you build and fly the Proxima Centauri!

    Rhino Model Rocket Kit

    FlisKits Rhino Model Rocket Kit

    FlisKits designed the Rhino as a rocket to help educators. The kit is designed to be simple to build yet teach important skills required to construct model rockets. The kit provides two different fin designs to allow each student to customize the appearance of the rocket.

    Producing slow, realistic takeoffs, this large model is a perfect small field rocket. It doesn't fly very high and returns on a brightly colored FlisKits parachute.

    The instructions include a detailed section on hints and tips to help beginners learn from the model building experience.

    Rhino Model Rocket Kit

    FlisKits Rhino Model Rocket Kit

    FlisKits designed the Rhino as a rocket to help educators. The kit is designed to be simple to build yet teach important skills required to construct model rockets. The kit provides two different fin designs to allow each student to customize the appearance of the rocket.

    Producing slow, realistic takeoffs, this large model is a perfect small field rocket. It doesn't fly very high and returns on a brightly colored FlisKits parachute.

    The instructions include a detailed section on hints and tips to help beginners learn from the model building experience.

    Robert Goddard's L-13 Model Rocket Kit

    FlisKits Robert Goddard's L-13 Model Rocket Kit

    From 1936 to 1939, Robert Goddard flew his K and L series of rockets. Attempting to build and test larger rockets, Goddard suffered a number of failures. Finally, he settled on a smaller and lighter rocket designed to attain higher altitudes.

    The L-13 was the result of this effort. On March 26, 1937, Goddard's L-13 flew to an altitude of 2700 meters.

    This 1:5.5 sport scale model of Goddard's L-13 rocket is easy to build and will provide you with a very nice looking reproduction of this famous rocket. Turning in outstanding flights on all motors, the L-13 is a must for scale enthusiast as well as history buffs and those who just want a very cool rocket to show off at their next launch.

    Rose-A-Roc Model Rocket Kit

    FlisKits Rose-A-Roc Model Rocket Kit

    The Rose-a-Roc kit is based on Art Rose's competition helicopter duration design.

    Boosting on a wide variety of motors, the Rose-A-Roc leaps into the air, gaining surprising altitude. At apogee, the ejection charge burns away a hold-down string that releases three large, impressive, helicopter blades. Designed for a self-induced spin, she hangs in the air for a moment then begins to drop. Suddenly, the blades begin to spin and pick up speed! Riding a cushion of air as she descends, the Rose-A-Roc floats gently to the ground.

    FlisKits has, with Art's permission, re-engineered the Rose-A-Roc for a simpler and more precise build. But, it remains a high-end competition model.

    The Rose-a-Roc features a precision three-part, laser-cut hub that makes assembling the rotor hub a snap. The kit includes a custom-turned pre-drilled nose cone tailored for the Rose-a-Roc and precision laser-cut centering rings to hold the rotor shaft firmly for many flights. A unique method of attaching the launch lug allows the rocket to be flown without exotic launch equipment such as towers and pistons.

    Stingray Model Rocket Kit

    FlisKits Stingray Model Rocket Kit

    The Stingray is a Skill Level 3 kit that can challenge any rocketeer. But, the Stingray includes clear instructions and quality materials to allow most any modeler the ability to build and learn from this unique kit.

    The FlisKits Stingray does not come with any decals or markings.  The "body wrap" included with the kit is plain white requiring you to paint it and decorate it yourself. The style of the finished product is left up to your imagination. 

    John Bishop built the rocket in our photos. The detail he adds brings all of his rockets to life. One technique he uses is to draw details, such as rivets and panels, onto the rocket using a pen.

    Thing-a-Ma-Jig Model Rocket Kit

    FlisKits Thing-a-Ma-Jig Model Rocket Kit

    The FlisKits Thing-a-Ma-Jig kit is designed for first-time rocket builders. The kit's laser-cut fins hold themselves together while the glue dries - ensuring perfect alignment.

    Triskelion Model Rocket Kit

    FlisKits Triskelion Model Rocket Kit

    FlisKits's Triskelion is a terrific choice for your second rocket (or your 100th). The Triskelion features laser-cut fins which give it a sharp look.

    Retro Rebel Model Rocket Kit

    Rocketarium Retro Rebel Model Rocket Kit

    Rocketarium has utilized a computer-controlled production process to create the intricate pieces that assemble to produce one of the most unique flying model rocket kits you'll ever see. The Rebel Rebel rocket kit includes twenty-two pre-cut plywood pieces. It uses a parachute for recovery and includes a Kevlar and elastic shock cord.

    Blue Jay Model Rocket Kit

    Semroc Blue Jay Model Rocket Kit

    Semroc's Blue Jay kit is an easy-to-build boost glider. After apogee, the booster returns under a streamer while the glider flies back to earth.

    Hawk Model Rocket Kit

    Semroc Hawk Model Rocket Kit

    The Hawk model rocket boost glider is based on a hand-launched balsa glider. It was originally marketed by Advanced Model Rocket Systems (AMROCS) in their 1965 catalog.

    The Semroc version of the Hawk kit includes laser-cut balsa fins and a balsa nose cone. Pre-printed lines on the balsa sheet make assembly easy.

    Mars Lander Model Rocket Kit

    Semroc Mars Lander Model Rocket Kit

    Semroc's Mars Lander is based on the classic Estes kit which was produced from 1969 to 1983.

    Although a challenge to build, you'll be pleased with the result. Semroc's parts and instructions are of the highest quality.

    UFO Invader Model Rocket Kit

    Semroc UFO Invader Model Rocket Kit

    The year is 1980 and at last the existence of flying saucers is a proven fact. First sighted in the mysterious Bermuda Triangle, the U.F.O. Invader has been observed by countless eyewitnesses. The Invader is a submarine as well as a deep space ship...able to travel on the ocean surface, buoyed by its wing pods. It submerges to a hidden undersea base where the aliens perhaps study Earth and its people. Little is known about the aliens, but we know this: we are not alone in the universe!

    Semroc's UFO Invader kit is based on the 1970s Centuri "Super Kit." The kit features a balsa nose cone, laser-cut fiber fins, and waterslide decals. Includes two parachutes for recovery.



Copyright © 2018 JonRocket.com LLC