Your Shopping Cart is empty

We are currently open for business - accepting and processing orders. We will continue to do so as long as it is safe for us and our customers.

Please note that ground shipments are taking longer than usual right now.If you order motors, spray paint, or anything else that must be shipped by ground, please be patient.

Recommended Motors = C11-5

    RP-3 (24mm) Model Rocket Kit

    Aerospace Speciality Products RP-3 (24mm) Model Rocket Kit

    The RP-3 was an unguided experimental Polish rocket. Earlier versions of the RP series were used for diverse purposes such as wind studies and carrying "Rocket Mail." The RP-3 was first built in 1963 and stood over seven feet tall.

    ASP's scale model is 22" tall. This unique-looking kit is a sturdy model for D and E powered flights, yet it is still light enough to fly on selected 18mm engines with a motor adapter (not included). The kit includes laser-cut ply fins, balsa nose cone, and decal. Many who own this kit count it among their favorites.

    RX-250-LPN (24mm) Model Rocket Kit

    Aerospace Speciality Products RX-250-LPN (24mm) Model Rocket Kit

    ASP's RX-250-LPN is a flying scale model of the Indonesian sounding rocket. The RX series of rockets was first developed in the mid 1980s. Designed to lift scientific instruments to an altitude of 70 km, the real RX-250-LPN was flown between the years of 1987 and 2007.

    This scale kit is nearly two and a half feet tall and features a balsa nose cone, laser-cut basswood fins, water-slide decals, and a quick-change engine hook.

    Designed primarily for 24mm C, D & E engines, it can also be flown on selected 18mm engines with an adapter (not included). A bright metallic parachute returns it to the ground for flight after flight.

    Sky-Ferry (24mm) Model Rocket Kit

    Aerospace Speciality Products Sky-Ferry (24mm) Model Rocket Kit

    ASP's Sky-Ferry is a big (over 2 1/2 feet tall!), easy-to-build model rocket. The Sky-Ferry makes a great first or second rocket kit. Designed with the beginner in mind, it's also a great sport flier for the more experienced modeler.

    The Sky-Ferry features balsa fins, a balsa nose cone, a big payload section (it will hold many commercial electronics), a quick change engine hook, and a bright parachute for recovery. Designed to fly primarily on 24mm engines, it can also fly on 18mm engines with an adapter (not included).

    WAC Corporal (24mm) Model Rocket Kit

    Aerospace Speciality Products WAC Corporal (24mm) Model Rocket Kit

    The WAC Corporal was the United States first sounding rocket. Seventeen WAC and WAC B rockets were flown from 1945 to 1947. The WAC was launched with the aid of the Tiny Tim solid propellant booster. After the booster burned out it fell away and the liquid fuel propelled sustainer stage continued its upward flight.

    ASP's 24mm WAC Corporal is a single-stage "Fun Scale" model of the historic rocket. Designed to fly on D and E motors, it's still light enough to fly on selected 18mm motors with an adapter (not included).

    Green Eggs Model Rocket Kit

    Estes Green Eggs Model Rocket Kit

    Green Eggs is an egg-lofting rocket designed for Estes C11 and D engines. The clear payload is big enough to carry two eggs (with a D12-3 motor). The swept fins allow the rocket to stand by itself.

    The main body tube and clear payload section are both the same diameter allowing a standard launch lug to be glued into place with no awkward stand-off needed.

    Through-The-Wall (TTW) thick balsa fins make for easier alignment and super strength. All these features add up to less time building and more time to perform experiments with your "eggstronauts."

    Green Eggs Model Rocket Kit

    Estes Green Eggs Model Rocket Kit

    Green Eggs is an egg-lofting rocket designed for Estes C11 and D engines. The clear payload is big enough to carry two eggs (with a D12-3 motor). The swept fins allow the rocket to stand by itself.

    The main body tube and clear payload section are both the same diameter allowing a standard launch lug to be glued into place with no awkward stand-off needed.

    Through-The-Wall (TTW) thick balsa fins make for easier alignment and super strength. All these features add up to less time building and more time to perform experiments with your "eggstronauts."

    Show Stopper Model Rocket Kit

    Estes Show Stopper Model Rocket Kit

    The Estes Show Stopper is almost ready to fly when you receive it.  It features a bright chrome body and files on 24mm C and D motors for impressive lift-offs.

    Aerobee 150 Model Rocket Kit

    Semroc Aerobee 150 Model Rocket Kit

    Semroc's Aerobee 150 is a semi-scale kit of the unguided suborbital American Sounding rocket produced by Aerojet General in the 1950s.



Copyright © 2020 JonRocket.com LLC