Your Shopping Cart is empty

Diameter (in) in range 1.59...1.69

    Kappa-9M (24mm or 3x18mm Cluster) Model Rocket Kit

    Aerospace Speciality Products Kappa-9M (24mm or 3x18mm Cluster) Model Rocket Kit (1.6400)

    The Kappa 9M is a two-stage Japanese sounding rocket. The first Kappa 9M (K-9M-1) was flown on November 12, 1962.

    Impressive on display as well as in the air, this kit features basswood fins, a balsa nose cone, and balsa transition, and decal. This big (over 3 1/2 feet tall) model is a can be built to fly on a cluster of three 18mm motors or a single 24mm motor.

    Not So Stubby (18mm) Model Rocket Kit

    Aerospace Speciality Products Not So Stubby (18mm) Model Rocket Kit (1.6370 - BT-60)

    The bigger brother of ASP's Stubby, the "Not So Stubby" is a fun, easy to build model which is ideal for flying on any size field. Like its little brother, this kit is designed with the beginner in mind, but also is a great sport flier for the more experienced modeler.

    Features laser-cut balsa fins, a balsa nose cone, quick change engine hook, and parachute recovery, the Not So Stubbyflies on easy to find 18mm A, B or C engines.

    Stretch Stubby (18mm) Model Rocket Kit

    Aerospace Speciality Products Stretch Stubby (18mm) Model Rocket Kit (1.6370 - BT-60)

    The Stretch Stubby is ASP's big brother of their Stubby and the Not So Stubby kits. This fun, easy-to-build model features a big payload section.

    Designed wth the beginner in mind, this rocket makes a great first or second rocket kit.

    The Stretch Stubby features laser-cut balsa fins, a balsa nose cone, a quick change engine hook, a payload section (big enough to hold many commercial electronics), and a bright parachute for recovery.

    Stubby (13mm) Model Rocket Kit

    Aerospace Speciality Products Stubby (13mm) Model Rocket Kit (1.6370 - BT-60)

    ASP's Stubby is a cute, fun, and easy to build model. It is ideal for flying on small fields and makes a great first or second rocket kit.

    Designed with the beginner in mind, The Stubby is also a great sport flier for the more experienced modeler. Designed to fly on economical 13mm "Min Engines," ASP's Stubby features laser-cut balsa fins, a balsa nose cone, quick change engine hook, and a bright parachute for recovery.

    Tall Boy (24mm) Model Rocket Kit

    Aerospace Speciality Products Tall Boy (24mm) Model Rocket Kit (1.6370 - BT-60)

    ASP's Tall Boy is designed so that you can fly it in one of four configurations. This mean machine's modular design makes it easy to transport. The configuration is easily changed in minutes at the launch site.

    In the Extra Long configuration, the rocket is over 10 feet tall and uses 24mm D and E motors. The Short configurations can be flown using less-expensive 18mm motors using an adapter. (The adapter is not included.)

    This kit features Aerospace Speciality Products' usual top-quality components, outstanding instructions, a balsa wood nose cone, laser-cut balsa fins, and two parachutes.

    V-2 (24mm) Model Rocket Kit

    Aerospace Speciality Products V-2 (24mm) Model Rocket Kit (1.6370 - BT-60)

    ASP's 24mm V-2 is their most popular kit. The kit includes a pre-drilled balsa boattail, a balsa nose cone, and laser-cut basswood fins. Designed primarily to fly on D12 motors, the V2 also flies great on 18mm Bs and Cs with an adapter (not included).

    Equinox Model Rocket Kit

    Custom Rocket Equinox Model Rocket Kit (1.6370 - BT-60)

    Estes no longer produces the extra-tall Mean Machine rocket kit. So, if you want big, consider the Custom Rocket Equinox.

    The Equinox is a six-foot tall monster! When you launch the Equinox, it slowly lifts off the pad just like a real rocket. The kit includes a large pressure-sensitive decal, two parachutes, a blow-molded nose cone, and a quick-release engine mount.

    Landviper Model Rocket Kit

    Custom Rocket Landviper Model Rocket Kit (1.6370 - BT-60)

    The Landviper is a big, three-engine cluster rocket. The kit features a blow-molded plastic nose cone, six die-cut balsa fins, an 18" parachute, self-adhesive decals, and complete cluster instructions.

    Liberty Model Rocket Kit

    Custom Rocket Liberty Model Rocket Kit (1.6300)

    If you like the Custom Rocket Freedom kit then you'll want this kit.  Liberty is a big sport rocket with large decals. The kit features a blow-molded plastic nose cone, die-cut balsa fins, 18" parachute recovery, pressure-sensitive decals, and a quick-release engine mount. Flights of over 750 feet are possible with a D12-5 motor.

    Nomad Model Rocket Kit

    Custom Rocket Nomad Model Rocket Kit (1.6370 - BT-60)

    The Custom Rocket Company's Nomad depicts a futuristic deep space satellite camera. The kit includes a vacuum-formed plastic nose cone, laser-cut balsa fins, a 12" parachute, a self-adhesive decal sheet, and a quick-release engine mount.

    Scavenger Model Rocket Kit

    Custom Rocket Scavenger Model Rocket Kit (1.6300)

    The Custom Scavenger is a D-powered rocket with big decals. Easy to build and fly, it makes a great demonstration flyer. The kit features a blow-molded plastic nose cone, die-cut balsa fins, 18" parachute recovery, pressure sensitive decals, and a quick-release engine mount. Flights of over 1000 feet are possible with a D12-5 motor.

    AS-203 Saturn IB Model Rocket Kit

    Dr. Zooch AS-203 Saturn IB Model Rocket Kit (1.6400)

    This is an "ant-scale" or semi-scale model of the AS-203 Saturn IB.

    AS-203 was a one-of-a-kind Saturn IB that was launched in order to test the S-IVB stage in orbit and study the effects of zero-G on liquid hydrogen. For that reason it carried a nosecone instead of an Apollo spacecraf.  This kit is the same scale as our other Dr. Zooch Saturn I and Saturn IB kits, so you can add it to your set.

    Alien Green Crayon Model Rocket Kit

    Estes Alien Green Crayon Model Rocket Kit (1.6400)

    The Green Alien model rocket kit is almost ready to fly. This crayon-themed rocket stands almost 20" tall and features a twist-on fin section when also acts as a motor retainer.

    Astron Sprint XL Model Rocket Kit

    Estes Astron Sprint XL Model Rocket Kit (1.6400)

    For more than three decades, Mike Dorffler designed rockets and other products for Estes. To honor Dorffler’s legacy, Estes has produced a larger version of one of Mike’s classic rockets. The Skill Level 2 Astron XL flies on 24mm C, D, and E motors.

    Atomic Aqua Model Rocket Kit

    Estes Atomic Aqua Model Rocket Kit (1.6400)

    One of Estes's series of "ready-to-fly" crayon rockets, the Atomic Aqua flies to more than 500 feet on a C motor.

    Baby Bertha Model Rocket Kit

    Estes Baby Bertha Model Rocket Kit (1.6400)

    The Baby Bertha is a pint-sized version of the classic Big Bertha. At just under 13 inches, the Baby Bertha is about half the size of it's larger cousin. The Baby Bertha kit features laser-cut fins, a plastic nose cone, self-stick decals, and a colorful 12-inch pre-assembled parachute.

    Black Hole Model Rocket Kit

    Estes Black Hole Model Rocket Kit (1.6400)

    One of Estes's series of crayon-inspired rockets, the Black Hole is almost ready to fly. Standing almost 20 inches tall, this rocket goes well over 500 feet.

    Black Star Voyager Model Rocket Kit

    Estes Black Star Voyager Model Rocket Kit (1.6400)

    Hands down, the coolest rocket to hit the Estes line this year, the Black Star Voyager can soar to 1100 feet when powered by an E12-4 engine. For the serious rocketeer, this is a must have!

    Sharpen your building skills because when you are finished building this rocket, you will be the envy of the flying fiield!

    Blast Off Blue Model Rocket Kit

    Estes Blast Off Blue Model Rocket Kit (1.6400)

    Blast off with the Estes Blast Off Blue flying model rocket. This kit comes pretty much ready to fly and soars to more than 500 feet on a C motor.

    Color the Sky Crayon Rockets Bulk Pack (12)

    Estes Color the Sky Crayon Rockets Bulk Pack (12) (1.6400)

    The Estes Color The Sky collection includes twelve crayon-themed rocket kits - each a different color.

    Each kit is easy-to-assemble with plastic fins and nose cone, self-stick decals, and a plastic parachute.

    This is a bulk package of twelve (12) kits.

    Curvilinear Model Rocket Kit

    Estes Curvilinear Model Rocket Kit (1.6400)

    The new Estes Curvilinear is an easy-to-build rocket which is great for flying from a small field.

    Der Red Max Model Rocket Kit

    Estes Der Red Max Model Rocket Kit (1.6400)

    Der Red Max is a re-issue of the classic kit which first appeared in Estes's 1971 catalog. The rocket is a little more than 16 inches tall. It includes waterslide decals, laser-cut balsa fins, and a pre-assembled 18" parachute.

    Extreme 12 Model Rocket Kit

    Estes Extreme 12 Model Rocket Kit (1.6400)

    At almost four-foot in length, the two-stage Estes Extreme 12 flies on D and E motors. The Extreme 12 can reach heights of almost 2,000 feet! Laser-cut wood fins and waterslide decals contribute to the quality of this kit.

    Firestorm Model Rocket Kit

    Estes Firestorm Model Rocket Kit (1.6400)

    The Estes Firestorm is an "Almost Ready-to-Fly" (ARTF) model rocket featuring uniquely colored plastic fins and nose cone. Just slip the fins into the fin can and the rocket is ready to prep for flight.

    Add the BT-60 Booster accessory (sold separately) to fly the Firestorm as a two-stage rocket.

    Flying Colors Model Rocket Kit

    Estes Flying Colors Model Rocket Kit (1.6400)

    Este's Flying Colors model rocket sports a fun color scheme. It's almost fully assembled when you get it.  Just slip the fins into the fin can, and it's ready to prep for launch. Add the BT-60 Booster accessory (sold separately) to convert the Flying Colors to a multi-stage rocket.

    Fractured Model Rocket Kit

    Estes Fractured Model Rocket Kit (1.6400)

    Easily assembled and ready for flight quickly, the Fractured doesn't require any painting. It flies up to 550 feet on a C6-3 or C6-5 engine. Add the Booster-60 accessory (sold separately) for two-stage flights.

    Helios Model Rocket Kit

    Estes Helios Model Rocket Kit (1.6400)

    The Estes Helios is an almost-ready-to-fly rocket featuring a bright silver body tube and yellow fins and nose cone. Slide the fins into the fin can and the rocket is ready to prep for flight.

    The BT-60 Booster accessory (sold separately) converts the Helios into a two-stage rocket.

    Hi-Flier XL Model Rocket Kit

    Estes Hi-Flier XL Model Rocket Kit (1.6400)

    The Hi-Flier XL is an upsized replica of the #1 selling Estes Hi-Flier! Powered by C11, D and E engines, this sporty rocket can reach amazing heights.

    Honest John Model Rocket Kit

    Estes Honest John Model Rocket Kit (1.6400)

    Estes's 1/14th scale Honest John flies on an E motor to an altitude of about 1400 feet then returns to earth via parachute.

    Jetliner Model Rocket Kit

    Estes Jetliner Model Rocket Kit (1.6400)

    The Estes Jetliner will remind long-time rocketeers of the Goonybirds series of rockets from the 1970s.

    Laser Lance Model Rocket Kit

    Estes Laser Lance Model Rocket Kit (1.6400)

    The Laser Lance stands over 20 inches tall and can reach heights of 925 feet. A military-style model, it's sure to be a crowd pleaser!

    Mini Fat Boy Model Rocket Kit

    Estes Mini Fat Boy Model Rocket Kit (1.6400)

    Estes has produced a smaller version of its classic Fat Boy model rocket kit. The Mini Fat Boy flies on 13mm motors and features parachute recovery.

    MIRV Model Rocket Kit

    Estes MIRV Model Rocket Kit (1.6400)

    Enter the world of Multiple Re-Entry Vehicles with the Estes MIRV. The angular design of the model allows three independently powered rockets to separate from the booster which then climb to out-of-sight flights.

    This model includes light-weight foam and specially-molded plastic parts along with laser-cut wood fins. Recovery of the three upper stages is by “High Drag Recovery” which allows them to float gently back to Earth.

    PLEASE NOTE: This rocket requires four engines to launch - one B6-0 (or C6-0) and three A10-3Ts.

    Nike Smoke Model Rocket Kit

    Estes Nike Smoke Model Rocket Kit (1.6400)

    The Estes Nike Smoke is a 1/10th scale flying model of the Nasa sounding rocket developed in the 1960s to explore the behavior of horizontal winds in the upper atmosphere.

    Planet Purple Crayon Model Rocket Kit

    Estes Planet Purple Crayon Model Rocket Kit (1.6400)

    One-eyed, one-horned flying purple ... oops ... wrong flying purple thing! This is the flying purple crayon rocket from Estes. It arrives assembled and pretty much ready to fly.

    The Estes Purple Planet Crayon flies up to 500 feet on a standard C motor.

    Protostar Model Rocket Kit

    Estes Protostar Model Rocket Kit (1.6400)

    The Estes Protostar is about two feet tall and flies on 24mm C11, D12, and E12 motors. Add its furturistic design to your space fleet.

    QCC Explorer Model Rocket Kit

    Estes QCC Explorer Model Rocket Kit (1.6400)

    Don't let the looks fool you with this Skill Level 4 kit. It may look like it's simple to build, but what's under the paint will surprise you! Each simulated air intake/fin assembly is constructed from 12 interlocking laser cut balsa pieces.

    Renegade-D Model Rocket Kit

    Estes Renegade-D Model Rocket Kit (1.6400)

    The Renegade-D is a futuristic space pirate vehicle. This is truly a sleek, galactic-shaped, multi-fin beauty, and a must-have for all model rocket enthusiasts.

    The Skill Level 3 kit has many innovative assembly features including a one-piece main body tube, laser-cut fins and wings, plastic wing pod, a cool molded canopy nose cone, and a pirate-themed waterslide decal set. This rebel is a real standout at the launch field! Great looks aren't all this outlaw has. When launched with a powerful Estes D12-5 engine, this smoking hot, high flying spacecraft can reach heights over 850 feet. This cruiser slowly descends on a large, colorful 18-inch (46 cm) pre-assembled parachute.

    This kit is no longer being produced by Estes. Quantities are limited.

    Rocket Red Crayon Model Rocket Kit

    Estes Rocket Red Crayon Model Rocket Kit (1.6400)

    Rocket Red is a RTF crayon-themed rocket. It stands almost 20" tall and features a twist-on fin section.

    Rookie Model Rocket Kit

    Estes Rookie Model Rocket Kit (1.6400)

    There is nothing "rookie" about the Estes Rookie rocket. Quick to assembe and a high flier, the Rookie is powered by standard engines and can reach heights over 500 feet. And if you want to go really high, add the BT-60 Booster Accessory (sold separately) and a D12-0 booster engine then watch this rocket soar.

    Satellite Silver Model Rocket Kit

    Estes Satellite Silver Model Rocket Kit (1.6400)

    Estes's Satellite Silver rocket is styled like a flying crayon. Just insert an engine, twist on the fin unit, attach the shock cord to the nose cone, and you are ready for launch.

    A couple of minutes of your time and you are on the flying field ready to blast off. Standing almost 20 inches tall, this rocket goes well over 500 feet.

    Show Stopper Model Rocket Kit

    Estes Show Stopper Model Rocket Kit (1.6400)

    The Estes Show Stopper is almost ready to fly when you receive it.  It features a bright chrome body and files on 24mm C and D motors for impressive lift-offs.

    Solar Warrior Model Rocket Kit

    Estes Solar Warrior Model Rocket Kit (1.6400)

    A sleek sport rocket standing 27 inches tall, the Solar Warrior is screaming to be added to your collection. This rocket can heights over 900 feet.

    The Solar Warrior flies on C11 and D and engines and a bright 18-inch parachute brings it back to earth. Be the first in your neighborhood to get this hot rocket!

    Spectra Model Rocket Kit

    Estes Spectra Model Rocket Kit (1.6400)

    Assembling the Spectra is as simple as sliding the fins into the fin can. This almost-ready-to-fly rocket will reach altitudes of 550 feet on a C motor.  Add the BT-60 Booster Accessory (sold separately) and watch the Spectra soar way past 1250 feet as a two-stage rocket.

    Star Orbiter Model Rocket Kit

    Estes Star Orbiter Model Rocket Kit (1.6400)

    The Estes Star Orbiter flies on Estes's black powder E and F motors. This kit includes laser-cut wood fins, a screw-on motor retainer, and a parachute.

    Starbase Starcruiser Model Rocket Kit (OOP)

    Estes Starbase Starcruiser Model Rocket Kit (OOP) (1.6370 - BT-60)

    The Starbase Starcruiser was produced by Estes in 1995 specifically for the US Department of Defense's STARBASE youth program.

    STARBASE is an educational program, sponsored by the Office of the Assistant Secretary of Defense for Reserve Affairs. STARBASE students participate in challenging "hands-on, mind-on" activities in Science, Technology, Engineering, and Math.

    This kit is still in the original, plain plastic bag, packaging. It features a plastic fin set and a large, self-stick decal sheet.

    STM 012 Model Rocket Kit

    Estes STM 012 Model Rocket Kit (1.6400)

    The STM 012 is a sporty, 24mm-powered bird. It features a slotted body tube and waterslide decals.

    Stormcaster Model Rocket Kit

    Estes Stormcaster Model Rocket Kit (1.6400)

    The Stormcaster is one of the largest Skill Level 1 rockets. It's an impressive 30 inches tall with sleek good looks.

    Super Neon XL Model Rocket Kit

    Estes Super Neon XL Model Rocket Kit (1.6400)

    The Estes Super Neon XL is a large, impressive rocket. It's space-age multi-tube fin design provides superior flight stability and a one-of-a-kind look. The Super Neon XL is a gigantic, more-powerful upscaled version of the Estes Super Neon.

    The Super Neon XL features laser cut wood parts, a high-quality wood nose cone, neon waterslide decals, and top quality Estes body tubes. These features combine to guarantee outstanding flight performance. Towering over most rockets at 37 inches, the XL lifts off on powerful Estes D and E engines. It returns smoothly to earth under a vivid 24-inch parachute.

    Vagabond Model Rocket Kit

    Estes Vagabond Model Rocket Kit (1.6400)

    Standing almost three feet tall, the Estes Vagabond can reach heights of 1275 feet. Launched on D and E engines, this rocket is sure to be a crowd-pleaser.

    Deuce's Wild Model Rocket Kit

    FlisKits Deuce's Wild Model Rocket Kit (1.6370 - BT-60)

    The Deuce's Wild is a two-motor cluster rocket with a twist ... or a tilt.  The two motor tubes are canted producing an exciting smoke trail as the rocket flies into the sky.

    Although, it's important that the two motors light at the same time for the rocket to fly well, FlisKits has designed the Deuce's Wild with safety in mind.  The motors are angled so that the thrust line of each motor is aligned with the Center of Gravity of the rocket.  What this means is, if the motors don't light at exactly the same time, or one motor fails to light, the Deuce's Wild will still tend to fly straight.

    Drake Model Rocket Kit

    FlisKits Drake Model Rocket Kit (1.6370 - BT-60)

    FlisKit's Drake features large, forward swept wings with a stylish dorsal fin and ramjet tube along with a large (1.637" Diameter) parachute compartment to ensure clean ejection of your recovery device. Unique and stylish holes placed in the wing tips and the dorsal fin can be left open (stock) or decorated with standard US Quarters for that rich look. The Drake flies on a variety of 24mm motors.

    Journeyman (Argo D-8) Model Rocket Kit

    FlisKits Journeyman (Argo D-8) Model Rocket Kit (1.6370 - BT-60)

    Aerolab Development Company developed the Journeyman sounding rocket under the sponsorship of NACA/NASA with support from the Air Force Special Weapons Center, the Naval Bureau of Ordnance, and the Allegany Ballistics Laboratory. NASA used Journeyman flights to gather radiation data before the manned Mercury flights.

    FlisKits's approximately 1/16th scale model of the Journeyman features balsa nose cones, a detailed balsa lower adapter, accurately scaled Recruit motors, and water-slide decals.

    Praetor Model Rocket Kit

    FlisKits Praetor Model Rocket Kit (1.6370 - BT-60)

    The Praetor's most distinctive feature is its large fins. With the distinctive fins and slow, majestic lift-offs, this rocket is a crowd pleaser.

    The Praetor also has a very important and unique history. The Praetor was the anniversary kit, designed by Jim Flis and presented to attendees of the 1990 Pearl River Model Rocketry Convention in Pearl River, NY, founded and hosted by teacher Dick Nelson.

    The Praetor also has a small payload section suitable for a variety of payloads. A colorful 16" parachute returns your model gently, flight after flight. A fine addition to any model rocket fleet, the Praetor will provide many hours of enjoyment, both building and launching!

    Rhino Model Rocket Kit

    FlisKits Rhino Model Rocket Kit (1.6370 - BT-60)

    FlisKits designed the Rhino as a rocket to help educators. The kit is designed to be simple to build yet teach important skills required to construct model rockets. The kit provides two different fin designs to allow each student to customize the appearance of the rocket.

    Producing slow, realistic takeoffs, this large model is a perfect small field rocket. It doesn't fly very high and returns on a brightly colored FlisKits parachute.

    The instructions include a detailed section on hints and tips to help beginners learn from the model building experience.

    Robert Goddard's L-13 Model Rocket Kit

    FlisKits Robert Goddard's L-13 Model Rocket Kit (1.6370 - BT-60)

    From 1936 to 1939, Robert Goddard flew his K and L series of rockets. Attempting to build and test larger rockets, Goddard suffered a number of failures. Finally, he settled on a smaller and lighter rocket designed to attain higher altitudes.

    The L-13 was the result of this effort. On March 26, 1937, Goddard's L-13 flew to an altitude of 2700 meters.

    This 1:5.5 sport scale model of Goddard's L-13 rocket is easy to build and will provide you with a very nice looking reproduction of this famous rocket. Turning in outstanding flights on all motors, the L-13 is a must for scale enthusiast as well as history buffs and those who just want a very cool rocket to show off at their next launch.

    Tartar RIM-24A Model Rocket Kit

    FlisKits Tartar RIM-24A Model Rocket Kit (1.6370 - BT-60)

    FlisKits' 1/8th sport scale model of the Navy's Tartar missile stands over 21-inches tall.  The Tartar missile, a short/medium range surface-to-air missile, first flew in 1958.  Declared operational in 1962, the Tartar is essentially a Terrier HT-3 without a booster.  Designated as RIM-24A, the Tartar missile was effective within altitudes of 50-50,000 feet at distances between 2000 yards to 7.5 nm.

    Tres Model Rocket Kit

    FlisKits Tres Model Rocket Kit (1.6370 - BT-60)

    The Tres model rocket kit is the long awaited cousin to the FlisKit's Deuce's Wild.  The Tres flies on a three-canted motor cluster. Standing nearly 3 1/2 feet tall and sporting an exciting arrangement of large fins, this model stands out from the rest even before you launch it.
     
    The kit includes a report on clustering techniques as well as detailed information on how to hook up this most unusual cluster for outstanding flights.

    US Tog Model Rocket Kit

    FlisKits US Tog Model Rocket Kit (1.6370 - BT-60)

    The US TOG is an upscale version of one of FlisKits's tiny micromaxx rockets.  The original TOG was a pip-squeak compared to this giant.  The US TOG is almost three feet long and powered by the mighty C11 and D11 motors.
     
    From its smaller cousin, the US TOG inherits a mix of rearward and forward swept fins/wings with wing pods, ram jets and all sorts of sloped (scalloped) tubes.  The larger size of this kit allows more complexity and detail  For example, the US TOG sports a pair of detailed ram jet tubes with ram jet intakes with intricately cut fins made from 0.025" this card stock.  This level of detail is unprecedented and results in a very sharp looking model.

    Legacy Rocket Kit

    LOC/Precision Legacy Rocket Kit (1.6350)

    One of LOC's original Novice Kit Series which include a pre-marked airframe and a 29mm motor mount, the Lwgacy is a payload carrying vehicle standing over 4' tall. It can be flown on an Estes D12-3 motor with an optional 29mm to 24mm adapter, but goes out of sight on Aerotech 29mm Composite Motors!

    Parachute Recovery.

    All LOC/Precision PK-XX kits include heavy duty airframe and motor mount tubes, high-grade precision-cut plywood fins, centering rings, rip-stop nylon parachute or streamer, nylon elastic shock cord and mount, launch lug, polypropolene nose cones and instructions.

    Weasel Rocket Kit

    LOC/Precision Weasel Rocket Kit (1.6300)

    LOC's Weasel rocket kit includes a pre-marked airframe, 29mm motor mount, payload section, high-grade precision-cut plywood fins, centering rings, rip-stop nylon parachute, nylon elastic shock cord and mount, launch lug, polypropolene nose cones and instructions.

    Alamo Air-to-Air Missile Model Rocket Kit

    Rocketarium Alamo Air-to-Air Missile Model Rocket Kit (1.6370 - BT-60)

    Rocketarium's Alamo is a scale model of the Vympel R-27 air-to-air missile (which is designated the AA-10 Alamo by NATO). Rocketarium's Alamo military scale kit is a large and heavy model rocket which makes it excellent for small launch sites. The model features three sets of fins and a boat tail

    The Alamo military scale rocket kit has three sets of pre-cut fins for a total of twelve fins. The tail cone is created from the card stock template. The kit comes with the twelve pre-cut fins, plywood centering rings, a parachute kit for recovery, and other parts needed to build the rocket.

    Recommended Engines (and estimated altitude):

    • Single Use: D12-3 (480 ft), E20-4 (910 ft), E15-4 (1070 ft)
    • Aerotech RMS 24/40: D15-4 (540 ft), E18-4 (980 ft), F12-5 (1110 ft), F24-4 (1160 ft)
    • CTI Pro24: 24-E22-4 (650 ft), 26-E31-6 (700 ft)
    Arcturus Sounding Rocket Scale Model Rocket Kit

    Rocketarium Arcturus Sounding Rocket Scale Model Rocket Kit (1.6370 - BT-60)

    The Arcturus sounding rocket was designed and used for scientific data gathering, mainly meteorological. Itas intended to serve as a replacement, or upgrade, to the popular Arcas sounding rockets. It's main selling point was that it could be launched from the existing Arcas launch platforms, avoiding new infrastructure expenses. The Arcturus rocket never gained a wide user base as new two-stage Arcas configurations served the same purpose more efficiently.

    The finished scale model stands an impressive 38.5" tall. This is a big model rocket kit!

    Aster Military Missile Model Rocket Kit

    Rocketarium Aster Military Missile Model Rocket Kit (1.6370 - BT-60)

    The Aster missile family is generally flown in a two-stage configuration. The Aster 15 and Aster 30 missiles are identical, other than the size of the booster. The booster size determines the missile's range. The highly-agile Aster was designed to intercept next-generation supersonic anti-ship missiles.

    Rocketarium's semi-scale kit is a single-stage model of the sustainer stage of the ground-to-air Aster missile which flies on D to F engines.

    Cerberus Model Rocket Kit

    Rocketarium Cerberus Model Rocket Kit (1.6370 - BT-60)

    Rocketarium's Cerberus provides a good introduction to the fun and excitement of clustering. Featuring a stylish split-fin design, the Cerberus flies on a cluster of three A to C motors. The Cerberus stands nearly three feet tall and includes large self-adhesive decals and parachute kit for recovery.

    The included decals show the Cerberus logo. The three bands below the nose cone were painted. No engine hooks are provided with this kit, as there's no room for them. The motors are friction-fit.

    Daedalus Model Rocket Kit

    Rocketarium Daedalus Model Rocket Kit (1.6370 - BT-60)

    Rocketarium's Daedalus is a two-stage model rocket with self-adhesive decals, pre-cut fins, laser-cut plywood centering rings, translucent nose cone, and a 15" plastic parachute kit. Assembled, the Daedalus stands more than three feet tall.

    Frangible ARCAS Model Rocket Kit

    Rocketarium Frangible ARCAS Model Rocket Kit (1.6370 - BT-60)

    Atlantic Research Corporation developed the ARCAS (All-Purpose Rocket for Collecting Atmospheric Soundings) for the Office of Naval Research (ONR). An ARCAS rocket was first launched in July of 1959. During the 1960s, the Air Force developed a variant of the sounding rocket known as the Frangible ARCAS Meteorological Rocket which was designed to be flown over residential areas. To avoid injury and damage to property on the ground, a sheet of explosive material wrapped around the airframe allowed the rocket to be destroyed in mid-air..

    Rocketarium's scale Frangible ARCAS model separates at motor ejection and descends under a parachute. The kit doesn't get blown to pieces and, unlike the real rocket, can enjoy many flights.

    Icarus 3 Model Rocket Kit

    Rocketarium Icarus 3 Model Rocket Kit (1.6370 - BT-60)

    Rocketarium's Icarus 3 flies on a D to F impulse class model rocket motor. Almost two and a half feet tall, the Icarus features three distinctive rings around the airframe. Six rings are actually cut from from a single body tube section, but only three are visible on the rocket as they overlap. The Icarus III kit includes pre-cut balsa fins, plywood centering rings, a translucent plastic nose cone, and a 15" plastic parachute kit.

    Jay Hawk AQM-37C Scale Model Rocket Kit

    Rocketarium Jay Hawk AQM-37C Scale Model Rocket Kit (1.6370 - BT-60)

    Rocketarium's sport-scale model of the popular Jay Hawk target drone includes two sheets of self-adhesive decals.

    The Jay Hawk AQM-37C model rocket kit is a great flier for sport launches or NAR competition.As a skill level 4 kit, the Jay Hawk offers up a healthy dose of challenges. The boat tail is formed from cardstock. Fins are cut from balsa wood and are assembled. Templates are included with the kit.

    KSR-420S Scale Model Rocket Kit

    Rocketarium KSR-420S Scale Model Rocket Kit (1.6370 - BT-60)

    The KSR-420S Sounding Rocket is a Korean sounding rocket once used to gather data on ozone concentration over the Korean peninsula. The KSR-420S also carried a highly-specialized device to measure micro gravity. In somewhat less peaceful times, the KSR-420S could be modified to carry a 200kg destructive payload over a considerable distance.

    This sport-scale model of the KSR-420S flies on a cluster of three 18mm model rocket motors As a Skill Level 2 kit, the KSR-420S is easy to build. This makes it a great choice for rocketeers new to clustering.

    Little John Model Rocket Kit

    Rocketarium Little John Model Rocket Kit (1.6370 - BT-60)

    The US Army developed the Little John to deliver nuclear (and conventional) payloads.

    The Rocketarium sport-scale kit includes decals and decal placement instructions the black bands on the airframe. This is an easy-to-build, skill level 2 model rocket kit.

    The Little John kit is easy to build. If you can cut fins from balsa stock, you can build and enjoy this model rocket. Fin template is included.

    Maxtermind Model Rocket Kit

    Rocketarium Maxtermind Model Rocket Kit (1.6370 - BT-60)

    The Maxtermind is Rocketarium's signature rocket. This sleek mid-power rocket flies on D to F motors.

    The split-fin design gives the Maxtermind character and makes it fun to build. The kit includes large self-adhesive decals, laser-cut centering rings, balsa fin shock, parachute kit for recovery, and other parts needed to build it.

    Research Missile 2 Model Rocket Kit

    Rocketarium Research Missile 2 Model Rocket Kit (1.6370 - BT-60)

    The US developed the Research Missile 2 (RM-2) to study supersonic drag. Several vehicles were built to research the effects of fin shape and sweep on drag.

    The unique design of this model rocket will make it stand out at any launch. There are a total of four fins, and two large wings. Don't let those wings fool you, the RM2 flies as straight as can be.

    Rocketarium's Research Missile 2 model rocket kit has a boat tail which is cut from a cardstock template and shaped by the modeler. This makes the RM2 a Skill Level 4 kit. Otherwise it builds more like a Level 2 or 3 kit. The kit comes with enough balsa wood to cut the four fins and two large wings. Also included are three plywood centering rings, body tube, motor mount, nose cone, and parachute kit.

    Roland Surface-to-Air Missile Model Rocket Kit

    Rocketarium Roland Surface-to-Air Missile Model Rocket Kit (1.6370 - BT-60)

    The Roland was part of a mobile S.A.M. system which fired the missilesfrom a tube. As soon as the missiles left the tube, their fins popped into place. Different versions were developed by the U.S. Army and the French/German armed forces. The US version never made it past the development stage and was never used in battle.

    This model rocket kit comes with a lot of nose weight, required for stable flight. As a result, launches are slow and majestic. The weight limits altitude which is great for smaller launch sites.

    SA-2 Guideline Model Rocket Kit

    Rocketarium SA-2 Guideline Model Rocket Kit (1.6370 - BT-60)

    The Soviet SA-2 Guideline was the first surface-to-air missile to actually take down an enemy aircraft in flight. The Soviets deployed the SA-2 near Soviet cities, such as Moscow, to defend against USAF bombers during the cold war. Later, they were also used in East Germany.

    Rocketarium's flying scale model of the SA-2 features three sets of fins and an expanding tail cone. This unique design is fun to build and exciting to launch on a D12-5 or D17-7 motor. The finished rocket stands 26.5" tall and has a fin span of 5.625".

    SkyFlash Model Rocket Kit

    Rocketarium SkyFlash Model Rocket Kit (1.6370 - BT-60)

    Rocketarium's SkyFlash is a semi-scale model of a semi-active radar homing air-to-air missile.The medium-range SkyFlash missile was deployed in a wide variety of configurations.

    Due to the large forward fins, the SkyFlash model rocket is best flown when there's little to no wind.

    SS-520 Cluster Model Rocket Kit

    Rocketarium SS-520 Cluster Model Rocket Kit (1.6370 - BT-60)

    Rocketarium's SS-520 Cluster Rocket is a single-staged, sport-scale model of a Japanese sounding rocket. The real SS-520 is a two-stage rocket, the kit is single stage.

    The real SS-520 rockets can reach altitudes of 800 km to conduct scientific experiments and gather data. This flying model rocket doesn't go quite as high. It does, however, fly on a cluster of two 18mm motors for added fun and excitement.

    The kit's self-adhesive decal sheet includes fin wraps, lettering, and body wraps. The nose cone and antennae area (right below the nose cones) need to be painted.

    Super Chief II Multi-Stage Model Rocket Kit

    Rocketarium Super Chief II Multi-Stage Model Rocket Kit (1.6370 - BT-60)

    This Super Chief II sounding rocket combined the Talos booster and Castor sustainer to reach altitudes up to 190 miles. The rocket gathered data on daytime air glow from high altitudes.

    Rocketarium's sport-scale model of the Super Chief II also has two stages. It stages from a D motor to a B or C motor. The kit includes wrap-around bands, hatches, and decals to give it the right level of detail.

    Tank Buster 5 Model Rocket Kit

    Rocketarium Tank Buster 5 Model Rocket Kit (1.6370 - BT-60)

    This model rocket is an original design with a military inspiration. It is not a scale model of a real rocket. The TB5 represents a launched grenade used to disable, or destroy, a range of armored targets, tanks especially. The Tank Buster 5's unique shape and six fins will make it stand out at any launch. The TB5 can be flown on B motors for low flights, or C motors for more serious action. Due to the launch lug location, a four foot long 1/8" launch rod is required to safely fly this rocket.

    VK-7 Sounding Rocket Model Rocket Kit

    Rocketarium VK-7 Sounding Rocket Model Rocket Kit (1.6370 - BT-60)

    Rocketarium's Viking 7 is a sport scale model of the The Viking sounding rocket family which was developed by the US to provide a better research vehicle than the German V2. In the 1950's, several of the Viking rockets were designed and flown by the US Navy. As part of a scientific mission, the Viking 7 climbed to 136 miles, and beat the altitude record of the V2.

    Rocketarium's model flies on a cluster of two model rocket motors. Decals are included for the black, and white, lettering on the model rocket.



Copyright © 2017 JonRocket.com LLC