Your Shopping Cart is empty

Fin Material = Plywood

    Aerobee 100 Junior Model Rocket Kit

    Aerospace Speciality Products Aerobee 100 Junior Model Rocket Kit

    The Aerobee 100, or Aerobee Junior, was first flown early in 1958. This vehicle was designed by Aerojet General to be an inexpensive rocket to fly payloads of 50 - 100 pounds up to 90 miles. Most of the 20 produced used a solid-fuel booster, but two were actually sea-launched as a single-stage rocket (which makes this model eligible for NAR Scale competition).

    Aerobee rockets have long been a favorite of scale modelers. ASP's kit is 1.89" in diameter and about 2 1/2 feet tall and features through-the-wall laser-cut plywood fins (with optional balsa laminations), big balsa nose cone, pre-rounded basswood conduits, steel cable shock cord mount and water slide decal. Makes a great intro to mid-power rocketry and flies fantastic (and high!) on 29mm F and G engines!

    A parachute is not included with this kit. We recommend an 18" or 24" nylon parachute.

    This kit has an accurate scale outline, but is also a fairly easy build.

    Aerobee 300 Model Rocket Kit

    Aerospace Speciality Products Aerobee 300 Model Rocket Kit

    The Aerobee 300, or "Spaerobee", was first flown in 1958. Eleven were flown by the Air Force and Navy with the last taking flight in 1965. The Aerobee series of rockets was designed by Aerojet General and is considered a descendant of the WAC Corporal.

    Aerobee rockets have long been a favorite of scale modelers, and the Aerobee 300 has been an especially popular prototype. ASP's kit is 1.89" in diameter and over three feet tall! The kit features through-the-wall laser-cut plywood fins (with optional balsa laminations), balsa nose cone and transition, pre-rounded basswood conduits, steel cable shock cord mount and water slide and self-adhesive decals.

    Makes a great intro to mid-power rocketry and flies fantastic (and high!) on 29mm F and G engines! This model can reach some impressive altitudes, especially with G engines. The kit has an accurate scale outline but is also a fairly easy build that leaves room for the modeler to add additional details if desired.

    A parachute is not included with this kit. We recommend a 24" nylon parachute.

    D-Region Tomahawk (29mm) Rocket Kit

    Aerospace Speciality Products D-Region Tomahawk (29mm) Rocket Kit

    The D-Region Tomahawk was flown early in 1968. This vehicle was intended to fly to the D layer of the ionosphere, thus the name "D-Region". Tomahawk rockets are used to this day as the upper stage of many sounding rocket flights.

    The D-Region Tomahawk has long been a favorite of scale modelers. This new kit from ASP is over three feet tall and features through-the-wall laser-cut plywood fins, a balsa nose cone, a steel cable shock cord mount, and self-adhesive decals.

    This kit makes a great intro to mid-power rocketry and flies fantastic on 29mm F and G engines. ASP's kit provides an accurate scale outline, but is fairly easy to build leaving room for the modeler to add additional details if desired.

    A parachute is not included with this kit. A 24" nylon 'chute is recommeded.

    Skipper Rocket Kit

    Madcow Rocketry Skipper Rocket Kit

    The balsa tailcone adds a touch of excitement to the Skipper's 3FNC design. This Madcow kit includes a plastic nose cone, laser-cut plywood parts, a 'chute protect, nylon parachute, and a vinyl decal.

    Striker Rocket Kit

    Madcow Rocketry Striker Rocket Kit

    Sharp angles define the design of Madcow's Striker kit. This quality kit includes a 29mm motor mount, plastic nose cone, plywood fins, a parachute protector, and a nylon parachute.

    Mega Rebel Model Rocket Kit

    Rocketarium Mega Rebel Model Rocket Kit

    This Rocketarium Mega Rebel kit includes twenty-four precision-cut pieces of light plywood which assemble to form the unique flying model rocket. The Mega Rebel uses a parachute for recovery and includes a Kevlar heat shield and an elastic/Kevlar shock cord.

    Retro Rebel Model Rocket Kit

    Rocketarium Retro Rebel Model Rocket Kit

    Rocketarium has utilized a computer-controlled production process to create the intricate pieces that assemble to produce one of the most unique flying model rocket kits you'll ever see. The Rebel Rebel rocket kit includes twenty-two pre-cut plywood pieces. It uses a parachute for recovery and includes a Kevlar and elastic shock cord.

    NSL 2015 Commemorative Sky Wolf Rocket Kit

    SkyPyrates Rocketry NSL 2015 Commemorative Sky Wolf Rocket Kit

    The split-fin Sky Wolf is a high-performance, mid-power rocket.  Sleek and strong, with a 29mm motor mount, the Sky Wolf flies on D through H motors.

    The Sky Wolf kit features pre-cut plywood fins, heavy-duty body tubes, a Kevlar shock cord, a nylon parachute, and a vinyl decal.

    Produced to commemorate the 2015 National Sport Launch, this is a limited edition kit.



Copyright © 2019 JonRocket.com LLC